Curved Upholstered Four-Seat Lounge Sofa with Chaise End and Throw Pillows (model CUR-SOFA-2800-CRM) is listed under Faux Leather Sofa. Dimensions: 2800 × 1450 × 750 mm. Materials: Cream-colored woven fabric with a smooth matte face covering the continuous seat, back and arms. Load capacity: 480 kg. Product Features: curved,silhouette,upholstered,sofa,integrated,chaise,low-back,design,throw,pillows. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | KESHANG | Model | CUR-SOFA-2800-CRM |
| Overall dimensions (W × D × H) | 2800 × 1450 × 750 mm | Seat Cushion Thickness | 180 mm |
| Back Cushion Thickness | 160 mm | Leg Height / Floor Clearance | 160 mm |
| Net weight | 78 kg | Seating capacity | 4 persons |
| Distributed static seat load | 480 kg | Chaise concentrated load | 150 kg |
| Backrest lateral support load | 90 kg per seated position | Back cushion foam density | 30 kg/m3 |
| Seat foam density | 35 kg/m3 | Seat foam compression set acceptance | 8 percent after 22 hours at 70 degrees C |
| Fabric abrasion acceptance | 30000 Martindale cycles | Fabric pilling grade | Grade 3 to 4 after 2000 rubs |
| Outer upholstery | Cream-colored woven fabric with a smooth matte face covering the continuous seat, back and arms | Throw pillow upholstery | Four removable copper-orange square pillow covers with sewn edge seams |
| Seat padding | 180 mm polyurethane foam pad over a supported deck, finished with a tailored front seam | Back and arm padding | 150 mm foam and soft filling layer wrapped over a curved internal frame |
| Internal load frame | Kiln-dried timber or engineered-wood frame with corner blocks and screwed joints as procurement target | Seat support deck | Elastic webbing or sinuous-spring deck over timber rails with protective fabric lining |
| Seating layout | Curved four-position layout with three upright seats and one right-side chaise for lounge or reception use | Reclining use | The 1050 mm deep rounded end permits side sitting or reclining without a separate footrest |
| Pillow support | Four loose back pillows provide adjustable lumbar and shoulder support across the continuous backrest | Cleaning access | Pillow covers should use zippers or removable closures; fixed body upholstery requires vacuuming and spot cleaning |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | Reference Packaging Volume | 1.8 m³/item |
| Reference Packaged Gross Weight | 110 kg/item | Lounge and reception areas | Suits hotel lobbies, club lounges, sales galleries and office reception zones where the curved 2800 mm footprint creates a relaxed conversation group |
| Residential living spaces | Fits open-plan living rooms or large studios as a statement four-seat sofa with a dedicated chaise-side reclining position | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2800 × 1450 × 750 mm | |
|---|---|---|
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 78 kg | |
|---|---|---|
| Seating capacity | 4 persons | |
| Distributed static seat load | 480 kg | |
| Chaise concentrated load | 150 kg | |
| Backrest lateral support load | 90 kg per seated position | |
| Back cushion foam density | 30 kg/m3 | |
| Seat foam density | 35 kg/m3 | |
| Seat foam compression set acceptance | 8 percent after 22 hours at 70 degrees C | |
| Fabric abrasion acceptance | 30000 Martindale cycles | |
| Fabric pilling grade | Grade 3 to 4 after 2000 rubs |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Cream-colored woven fabric with a smooth matte face covering the continuous seat, back and arms | |
|---|---|---|
| Throw pillow upholstery | Four removable copper-orange square pillow covers with sewn edge seams | |
| Seat padding | 180 mm polyurethane foam pad over a supported deck, finished with a tailored front seam | |
| Back and arm padding | 150 mm foam and soft filling layer wrapped over a curved internal frame | |
| Internal load frame | Kiln-dried timber or engineered-wood frame with corner blocks and screwed joints as procurement target | |
| Seat support deck | Elastic webbing or sinuous-spring deck over timber rails with protective fabric lining |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating layout | Curved four-position layout with three upright seats and one right-side chaise for lounge or reception use | |
|---|---|---|
| Reclining use | The 1050 mm deep rounded end permits side sitting or reclining without a separate footrest | |
| Pillow support | Four loose back pillows provide adjustable lumbar and shoulder support across the continuous backrest | |
| Cleaning access | Pillow covers should use zippers or removable closures; fixed body upholstery requires vacuuming and spot cleaning |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Lounge and reception areas | Suits hotel lobbies, club lounges, sales galleries and office reception zones where the curved 2800 mm footprint creates a relaxed conversation group | |
|---|---|---|
| Residential living spaces | Fits open-plan living rooms or large studios as a statement four-seat sofa with a dedicated chaise-side reclining position |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture strength, durability and safety requirements for domestic seating, applicable as a baseline structural test reference | |
|---|---|---|
| EN 1022:2018 | Domestic furniture seating determination of stability, applicable to the asymmetrical curved and chaise form |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to the hidden timber or engineered-wood load frame | |
|---|---|---|
| GB/T 10357.6-2013 | Test method for furniture mechanical properties, applicable to sofa strength and durability evaluation | |
| GB 18401-2010 Category C | National general safety technical code for textile products, applicable to upholstery and pillow fabrics |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to the hidden timber or engineered-wood load frame; 2. GB/T 10357.6-2013: Test method for furniture mechanical properties, applicable to sofa strength and durability evaluation; 3. GB 18401-2010 Category C: National general safety technical code for textile products, applicable to upholstery and pillow fabrics; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp