纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2000 × 900 × 860 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Sofa rated load	240 kg total distributed static seating load, or 120 kg per occupant position
Each armchair rated load	160 kg static seated load centered on the cushion
Backrest horizontal load acceptance	80 kg applied for 1 hour without frame separation or permanent tilt
Seat cushion durability	80,000 cycles with 40% maximum height loss and no spring-through failure
Back cushion recovery	90% height recovery 30 minutes after a 70 kg compression-release test
Coffee table top load	50 kg uniformly distributed, with 20 kg central point-load capacity
Upholstery abrasion acceptance	50,000 Martindale cycles without exposed substrate or open seam
Seam strength	120 N tensile pull per seam with no thread rupture at arm and cushion joins
Floor loading	complete seating group weighs 118 kg and applies 210 kg per square meter maximum localized floor load
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seating upholstery	1.2 mm brown leather-look coated fabric or split-leather-compatible surface, tailored over sewn cushion panels
Seat cushions	45 kg/m3 high-resilience polyurethane foam core, 120 mm thick, wrapped with 200 g/m2 polyester fiber
Back cushions	35 kg/m3 polyurethane foam with fiber fill, 80 mm thick center and softly piped perimeter
Arm pads	30 kg/m3 polyurethane foam, 60 mm thick, bonded to 12 mm plywood arm caps before upholstery
Load-bearing inner frame	30 x 50 mm kiln-dried hardwood rails with 12 mm plywood corner blocks and glued screwed joints
Seat support	50 mm woven elastic webbing, 70 mm spacing, fixed over timber rails beneath removable cushion deck

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed two-position sofa seating	two 800 mm cushion bays provide separate posture zones with no recline or seat-depth adjustment
Matching armchair seating	two single chairs provide 600 mm individual seat widths and 190 mm padded arm support above the seat
Static back support	upright back angle set at 100 degrees from seat plane for short meeting and waiting use
Padded arm support	continuous 140 mm wide arms support seated entry and elbow resting at 620 mm floor height

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Corporate reception lobby	sofa against the wall and two angled chairs create a four-person waiting cluster for visitors and short host meetings.
Executive office conversation area	place the group in front of a bookshelf or window for informal interviews, briefings, and guest seating.

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.4

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RC-SOFA-311-CT1200

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RC-SOFA-311-CT1200

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RC-SOFA-311-CT1200打开导出工具

页面快速操作

发布采购询价

产品描述

The Brown Leather Reception Sofa and Lounge Chair Set with Coffee Table is an unbranded reception lounge seating set, model RC-SOFA-311-CT1200. Its coordinated brown finish and dark matte metal supports give commercial waiting areas a structured, understated appearance. The set is arranged as a fixed two-position sofa, two matching lounge chairs, and a paired coffee table, creating a compact four-person seating group for visitors and brief host conversations. In a reception lobby, the sofa can sit against a wall with the chairs angled toward the table. In an executive office, the same configuration works in front of a bookshelf or window for informal interviews, briefings, and guest seating. The upright 100-degree back angle is intended for short meetings and waiting rather than extended reclining. Separate cushion bays give the sofa distinct posture zones, while padded arms support seated entry and elbow resting. The chairs offer individual seat widths and matching arm support, preserving visual consistency across the layout. The seating uses brown leather-look coated fabric or a split-leather-compatible surface, tailored over sewn cushion panels. Seat cushions combine a high-resilience polyurethane foam core with polyester fiber wrap, while back cushions use polyurethane foam with fiber fill and a softly piped perimeter. Arm pads are bonded to plywood arm caps before upholstery. The load-bearing inner frame uses kiln-dried hardwood rails, plywood corner blocks, and glued screwed joints, with woven elastic webbing fixed over timber rails beneath the removable cushion deck. Published construction details include a 90 mm finished seat cushion, 70 mm backrest padding, a 240 mm lumbar support zone, and 540 mm clear width between armrests. Rated use covers a distributed static sofa load, individual seated chair loads, defined backrest load acceptance, cushion cycling, back-cushion recovery, upholstery abrasion acceptance, and table load capacity. Procurement teams should note that the sofa offers no recline or seat-depth adjustment and is styled for reception and executive lounge use rather than residential theater seating. The product ships as one set in two cartons, with a referenced assembly time of forty minutes per set. Planning should also account for the unbranded presentation, fixed layout, matching table requirement, leather-look surface specification, and freight profile when comparing collections for lobby, office, or guest seating projects.

Brown Leather Reception Sofa and Lounge Chair Set with Coffee Table Specifications

供应商与现货