Brown Leather Reception Sofa and Lounge Chair Set with Coffee Table (model RC-SOFA-311-CT1200) is listed under Faux Leather Sofa. Dimensions: 2000 × 900 × 860 mm. Materials: 1.2 mm brown leather-look coated fabric or split-leather-compatible surface, tailored over sewn cushion panels. Load capacity: 240 kg total distributed static seating load, or 120 kg per occupant position. Product Features: business,style,brown,leather-look,upholstery,fixed,sofa,two,matching,lounge,chairs,paired,coffee,table. This page consolidates 6 groups of specifications and ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | FENGGUAN | Model | RC-SOFA-311-CT1200 |
| Overall dimensions (W × D × H) | 2000 × 900 × 860 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Sofa rated load | 240 kg total distributed static seating load, or 120 kg per occupant position |
| Each armchair rated load | 160 kg static seated load centered on the cushion | Backrest horizontal load acceptance | 80 kg applied for 1 hour without frame separation or permanent tilt |
| Seat cushion durability | 80,000 cycles with 40% maximum height loss and no spring-through failure | Back cushion recovery | 90% height recovery 30 minutes after a 70 kg compression-release test |
| Coffee table top load | 50 kg uniformly distributed, with 20 kg central point-load capacity | Upholstery abrasion acceptance | 50,000 Martindale cycles without exposed substrate or open seam |
| Seam strength | 120 N tensile pull per seam with no thread rupture at arm and cushion joins | Floor loading | complete seating group weighs 118 kg and applies 210 kg per square meter maximum localized floor load |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | Seating upholstery | 1.2 mm brown leather-look coated fabric or split-leather-compatible surface, tailored over sewn cushion panels |
| Seat cushions | 45 kg/m3 high-resilience polyurethane foam core, 120 mm thick, wrapped with 200 g/m2 polyester fiber | Back cushions | 35 kg/m3 polyurethane foam with fiber fill, 80 mm thick center and softly piped perimeter |
| Arm pads | 30 kg/m3 polyurethane foam, 60 mm thick, bonded to 12 mm plywood arm caps before upholstery | Load-bearing inner frame | 30 x 50 mm kiln-dried hardwood rails with 12 mm plywood corner blocks and glued screwed joints |
| Seat support | 50 mm woven elastic webbing, 70 mm spacing, fixed over timber rails beneath removable cushion deck | Fixed two-position sofa seating | two 800 mm cushion bays provide separate posture zones with no recline or seat-depth adjustment |
| Matching armchair seating | two single chairs provide 600 mm individual seat widths and 190 mm padded arm support above the seat | Static back support | upright back angle set at 100 degrees from seat plane for short meeting and waiting use |
| Padded arm support | continuous 140 mm wide arms support seated entry and elbow resting at 620 mm floor height | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Carton Dimensions | 850× 420× 720 mm |
| Reference Packaged Gross Weight | 23 kg/set | Reference Carton Volume | 0.26 m³/set |
| Indicative 20GP Loading | 135 sets at 85% space utilization | Corporate reception lobby | sofa against the wall and two angled chairs create a four-person waiting cluster for visitors and short host meetings. |
| Executive office conversation area | place the group in front of a bookshelf or window for informal interviews, briefings, and guest seating. | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2000 × 900 × 860 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Sofa rated load | 240 kg total distributed static seating load, or 120 kg per occupant position | |
|---|---|---|
| Each armchair rated load | 160 kg static seated load centered on the cushion | |
| Backrest horizontal load acceptance | 80 kg applied for 1 hour without frame separation or permanent tilt | |
| Seat cushion durability | 80,000 cycles with 40% maximum height loss and no spring-through failure | |
| Back cushion recovery | 90% height recovery 30 minutes after a 70 kg compression-release test | |
| Coffee table top load | 50 kg uniformly distributed, with 20 kg central point-load capacity | |
| Upholstery abrasion acceptance | 50,000 Martindale cycles without exposed substrate or open seam | |
| Seam strength | 120 N tensile pull per seam with no thread rupture at arm and cushion joins | |
| Floor loading | complete seating group weighs 118 kg and applies 210 kg per square meter maximum localized floor load | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seating upholstery | 1.2 mm brown leather-look coated fabric or split-leather-compatible surface, tailored over sewn cushion panels | |
|---|---|---|
| Seat cushions | 45 kg/m3 high-resilience polyurethane foam core, 120 mm thick, wrapped with 200 g/m2 polyester fiber | |
| Back cushions | 35 kg/m3 polyurethane foam with fiber fill, 80 mm thick center and softly piped perimeter | |
| Arm pads | 30 kg/m3 polyurethane foam, 60 mm thick, bonded to 12 mm plywood arm caps before upholstery | |
| Load-bearing inner frame | 30 x 50 mm kiln-dried hardwood rails with 12 mm plywood corner blocks and glued screwed joints | |
| Seat support | 50 mm woven elastic webbing, 70 mm spacing, fixed over timber rails beneath removable cushion deck |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Fixed two-position sofa seating | two 800 mm cushion bays provide separate posture zones with no recline or seat-depth adjustment | |
|---|---|---|
| Matching armchair seating | two single chairs provide 600 mm individual seat widths and 190 mm padded arm support above the seat | |
| Static back support | upright back angle set at 100 degrees from seat plane for short meeting and waiting use | |
| Padded arm support | continuous 140 mm wide arms support seated entry and elbow resting at 620 mm floor height |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Corporate reception lobby | sofa against the wall and two angled chairs create a four-person waiting cluster for visitors and short host meetings. | |
|---|---|---|
| Executive office conversation area | place the group in front of a bookshelf or window for informal interviews, briefings, and guest seating. |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp