纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1800 × 700 × 850 mm
Overall set footprint (3-seater across, side chairs flanking table)	3200 x 2200 x 850 mm
3-seater sofa dimensions	1800 x 700 x 850 mm
Single armchair dimensions	680 x 680 x 850 mm
Coffee table dimensions	1200 x 600 x 450 mm
Seat height from floor	450 mm
Seat depth per position	480 mm
Backrest height above seat	400 mm
Armrest height above seat	200 mm
Frame tube diameter	32 mm
Lower coffee table shelf clearance	250 mm
Seat width per single position	560 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

3-seater sofa total static load capacity	450 kg
Total set net weight (all pieces)	85 kg
Recommended maximum concurrent users	5
Frame surface abrasion resistance	50000 rub cycles
Mesh fabric tensile strength	1200 N
Product warranty period (commercial use)	3 years
Maximum recommended concurrent users	5
Frame chrome finish abrasion resistance	50000 rub cycles
Commercial use warranty period	3 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Structural frame	1.2mm thick chrome-plated cold-rolled steel tube
Seat support panel	Perforated steel sheet under mesh layer
Backrest/seat upholstery	Black breathable PVC-coated polyester mesh
Armrest top pads	Curved solid wood-grain finished arm caps with reddish-brown finish
Coffee table top	8mm thick black tempered safety glass
Coffee table frame	Polished chrome-plated bent steel tube matching chair frame finish
Coffee table lower shelf	Black matte laminated particleboard shelf
Frame foot pads	Non-slip rubber floor protection pads
Structural seating frame	1.2 mm thick polished chrome-plated cold-rolled steel tube
Backrest and seat upholstery	Black breathable PVC-coated polyester mesh
Frame contact points	Non-slip natural rubber floor protection pads
Frame welding points	Full-penetration polished welds at all tube joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating configuration	Fixed non-reclining, non-swivel upright position
Ventilation performance	Open mesh back and seat design allows continuous air flow
Armrest support	Fixed curved armrests run full length of each seating position
Coffee table storage	Dual-level design with upper glass top for serving and lower shelf for storage
Assembly structure	Knock-down construction for flat-pack shipping
Floor protection	Integrated rubber foot pads on all chair and table legs
Stability design	Angled splayed leg design on all chairs and table
Seating positioning	Fixed upright non-reclining, non-swivel orientation
Ventilation design	Open mesh back and seat construction enables continuous air flow
Shipping structure	Knock-down flat-pack construction for reduced freight volume
Tipping resistance	Splayed outward-angled leg design on all chairs and table
Surface maintenance	Smooth non-porous mesh, chrome and glass surfaces support wipe-down cleaning

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Number of shipping cartons per set	5
Largest carton dimensions (3-seater sofa)	1850 x 750 x 220 mm
Total gross shipping weight per set	100 kg
Total shipping volume (CBM) per set	0.62
On-site assembly time per set	60 minutes
20ft GP container loading quantity	42 sets
40ft HQ container loading quantity	105 sets
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Corporate office reception lobbies	Designed for short-term visitor waiting, chrome and black finish matches modern professional office interior design, durable frame withstands high daily foot traffic
Hospital outpatient waiting areas	Breathable mesh and easy-to-clean surfaces suit high-turnover public waiting spaces, robust steel frame meets commercial use demands
Bank and financial service waiting zones	Conservative professional aesthetic, fixed stable seating ensures orderly queuing, coffee table provides space for reading material and refreshments
Small business meeting breakout areas	Compact 5-seat configuration fits small informal meeting spaces, coffee table supports document and beverage placement during quick discussions
Government service center waiting halls	High-durability construction resists frequent public use, standardized design maintains consistent appearance across large waiting areas
Serviced office shared common areas	Low-maintenance materials reduce upkeep requirements for multi-tenant office spaces, modular layout can be reconfigured as needed
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office furniture - Office seating: EN 1335-1:2020	Applicable for seating dimensions, safety and strength requirements for non-task office reception seating
Furniture - Glass for furniture: EN 14072-2:2016	Applicable to toughened safety glass used in the coffee table top, specifies safety and performance criteria
Furniture - Seating - Test methods for strength and durability: EN 1728:2012	Applicable for mechanical durability testing of chair frames, seats and armrests for commercial use
Furniture - Glass for furniture: EN 14072:2016	Applicable to toughened safety glass used in the coffee table top, specifies safety and performance criteria

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

BIFMA X5.1-2017 (General Purpose Office Chairs)	Applicable reference for static load, backrest strength and stability testing for commercial reception seating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Tempered glass for furniture use: GB 15763.2-2005	Applicable to coffee table glass top, specifies impact resistance, breakage pattern and safety requirements for glass used in furniture
Furniture mechanical performance test for seating: GB/T 10357.3-2013	Applicable for static load, durability and stability testing of all seating pieces in the set
Formaldehyde emission limit for furniture materials: GB 18584-2001	Applicable to laminated table shelf and any bonded components, sets maximum permitted formaldehyde release for indoor office use

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Tempered glass for furniture use: GB 15763.2-2005：Applicable to coffee table glass top, specifies impact resistance, breakage pattern and safety requirements for glass used in furniture；
2. Furniture mechanical performance test for seating: GB/T 10357.3-2013：Applicable for static load, durability and stability testing of all seating pieces in the set；
3. Formaldehyde emission limit for furniture materials: GB 18584-2001：Applicable to laminated table shelf and any bonded components, sets maximum permitted formaldehyde release for indoor office use；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · REC-SET-MESH04-3S2S

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · REC-SET-MESH04-3S2S

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · REC-SET-MESH04-3S2S打开导出工具

页面快速操作

发布采购询价

产品描述

The JINSLEI 4-Piece Chrome Frame Mesh Office Reception Seating Set with Glass Coffee Table (model REC-SET-MESH4S2S) is a coordinated public waiting solution designed for consistent professional presentation and durable dly use. The set features a balanced, symmetrical layout with a three-seater sofa positioned centrally, flanked by two single armchairs, and a matching coffee table placed in front of the seating group to create an approachable, organized waiting zone. Its streamlined visual profile pairs polished chrome framing with black open-mesh upholstery, reddish-brown wood-grain arm caps, and a black glass coffee table top for a modern, understated aesthetic that aligns with contemporary commercial interior schemes.
Structurally, the set is built around heavy-gauge chrome-plated cold-rolled steel tube frames with polished full-penetration welds at all joints, finished to resist surface wear from regular public contact. Seating components use perforated steel support panels beneath black breathable PVC-coated polyester mesh upholstery, with dense foam padding for seat and back support, and curved fixed armrests capped with polished wood-tone surfaces. The matching coffee table uses 8mm thick black tempered safety glass for its upper surface, supported by a chrome frame that matches the seating, with a black matte laminated lower shelf for additional storage. All legs are fitted with non-slip rubber foot pads to protect hard flooring and reduce movement noise, while splayed, outward-angled leg designs widen each unit’s footprint to prevent tipping during normal use.
Designed for short-term waiting use, the set features fixed upright, non-reclining, non-swivel seating positions sized for comfortable upright posture, with open mesh construction that enables continuous r flow to prevent heat buildup during extended waiting periods. The dual-level coffee table offers a smooth, easy-to-wipe top surface for serving beverages or displaying materials, plus a lower shelf for storing reading materials or decorative items. All smooth, non-porous surfaces across the set support quick wipe-down cleaning to resist stning from spills in high-turnover spaces, and the knock-down flat-pack construction reduces freight costs for bulk orders.
This set is well suited for a wide range of commercial and shared spaces, including corporate office reception lobbies, hospital outpatient waiting areas, bank and financial service waiting zones, small business meeting breakout areas, government service center waiting halls, and serviced office shared common areas. It supports a maximum of five concurrent users, with seating proportions tailored to short-stay waiting applications.
For procurement planning, teams should note the set’s space planning footprint to confirm alignment with available reception area dimensions, and account for on-site assembly requirements for two people using standard hand tools. The product carries a 3-year commercial use warranty, with frame finish and mesh performance rated for high-frequency public use. Shipping and logistics parameters are provided for bulk order planning, with contner loading quantities available to support large-scale furnishing projects, though material grade specifications and final shipping details should be confirmed directly with the supplier prior to final purchase.

4-Piece Chrome Frame Mesh Office Reception Seating Set with Glass Coffee Table Specifications

供应商与现货