| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (3-seater across, side chairs flanking table) | 3200 x 2200 x 850 mm | |
|---|---|---|
| 3-seater sofa dimensions | 1800 x 700 x 850 mm | |
| Single armchair dimensions | 680 x 680 x 850 mm | |
| Coffee table dimensions | 1200 x 600 x 450 mm | |
| Seat height from floor | 450 mm | |
| Seat depth per position | 480 mm | |
| Backrest height above seat | 400 mm | |
| Armrest height above seat | 200 mm | |
| Frame tube diameter | 32 mm | |
| Lower coffee table shelf clearance | 250 mm | |
| Seat width per single position | 560 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| 3-seater sofa total static load capacity | 450 kg | |
|---|---|---|
| Total set net weight (all pieces) | 85 kg | |
| Recommended maximum concurrent users | 5 | |
| Frame surface abrasion resistance | 50000 rub cycles | |
| Mesh fabric tensile strength | 1200 N | |
| Product warranty period (commercial use) | 3 years | |
| Maximum recommended concurrent users | 5 | |
| Frame chrome finish abrasion resistance | 50000 rub cycles | |
| Commercial use warranty period | 3 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Structural frame | 1.2mm thick chrome-plated cold-rolled steel tube | |
|---|---|---|
| Seat support panel | Perforated steel sheet under mesh layer | |
| Backrest/seat upholstery | Black breathable PVC-coated polyester mesh | |
| Armrest top pads | Curved solid wood-grain finished arm caps with reddish-brown finish | |
| Coffee table top | 8mm thick black tempered safety glass | |
| Coffee table frame | Polished chrome-plated bent steel tube matching chair frame finish | |
| Coffee table lower shelf | Black matte laminated particleboard shelf | |
| Frame foot pads | Non-slip rubber floor protection pads | |
| Structural seating frame | 1.2 mm thick polished chrome-plated cold-rolled steel tube | |
| Backrest and seat upholstery | Black breathable PVC-coated polyester mesh | |
| Frame contact points | Non-slip natural rubber floor protection pads | |
| Frame welding points | Full-penetration polished welds at all tube joints |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed non-reclining, non-swivel upright position | |
|---|---|---|
| Ventilation performance | Open mesh back and seat design allows continuous air flow | |
| Armrest support | Fixed curved armrests run full length of each seating position | |
| Coffee table storage | Dual-level design with upper glass top for serving and lower shelf for storage | |
| Assembly structure | Knock-down construction for flat-pack shipping | |
| Floor protection | Integrated rubber foot pads on all chair and table legs | |
| Stability design | Angled splayed leg design on all chairs and table | |
| Seating positioning | Fixed upright non-reclining, non-swivel orientation | |
| Ventilation design | Open mesh back and seat construction enables continuous air flow | |
| Shipping structure | Knock-down flat-pack construction for reduced freight volume | |
| Tipping resistance | Splayed outward-angled leg design on all chairs and table | |
| Surface maintenance | Smooth non-porous mesh, chrome and glass surfaces support wipe-down cleaning |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons per set | 5 | |
|---|---|---|
| Largest carton dimensions (3-seater sofa) | 1850 x 750 x 220 mm | |
| Total gross shipping weight per set | 100 kg | |
| Total shipping volume (CBM) per set | 0.62 | |
| On-site assembly time per set | 60 minutes | |
| 20ft GP container loading quantity | 42 sets | |
| 40ft HQ container loading quantity | 105 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm |
Recommended spaces / users / usage modes
| Corporate office reception lobbies | Designed for short-term visitor waiting, chrome and black finish matches modern professional office interior design, durable frame withstands high daily foot traffic | |
|---|---|---|
| Hospital outpatient waiting areas | Breathable mesh and easy-to-clean surfaces suit high-turnover public waiting spaces, robust steel frame meets commercial use demands | |
| Bank and financial service waiting zones | Conservative professional aesthetic, fixed stable seating ensures orderly queuing, coffee table provides space for reading material and refreshments | |
| Small business meeting breakout areas | Compact 5-seat configuration fits small informal meeting spaces, coffee table supports document and beverage placement during quick discussions | |
| Government service center waiting halls | High-durability construction resists frequent public use, standardized design maintains consistent appearance across large waiting areas | |
| Serviced office shared common areas | Low-maintenance materials reduce upkeep requirements for multi-tenant office spaces, modular layout can be reconfigured as needed | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Office furniture - Office seating: EN 1335-1:2020 | Applicable for seating dimensions, safety and strength requirements for non-task office reception seating | |
|---|---|---|
| Furniture - Glass for furniture: EN 14072-2:2016 | Applicable to toughened safety glass used in the coffee table top, specifies safety and performance criteria | |
| Furniture - Seating - Test methods for strength and durability: EN 1728:2012 | Applicable for mechanical durability testing of chair frames, seats and armrests for commercial use | |
| Furniture - Glass for furniture: EN 14072:2016 | Applicable to toughened safety glass used in the coffee table top, specifies safety and performance criteria |
US and Canada office-furniture standards
| BIFMA X5.1-2017 (General Purpose Office Chairs) | Applicable reference for static load, backrest strength and stability testing for commercial reception seating |
|---|
Standards applicable to China-market projects
| Tempered glass for furniture use: GB 15763.2-2005 | Applicable to coffee table glass top, specifies impact resistance, breakage pattern and safety requirements for glass used in furniture | |
|---|---|---|
| Furniture mechanical performance test for seating: GB/T 10357.3-2013 | Applicable for static load, durability and stability testing of all seating pieces in the set | |
| Formaldehyde emission limit for furniture materials: GB 18584-2001 | Applicable to laminated table shelf and any bonded components, sets maximum permitted formaldehyde release for indoor office use |
This product must meet the following technical requirements: 1. Tempered glass for furniture use: GB 15763.2-2005: Applicable to coffee table glass top, specifies impact resistance, breakage pattern and safety requirements for glass used in furniture; 2. Furniture mechanical performance test for seating: GB/T 10357.3-2013: Applicable for static load, durability and stability testing of all seating pieces in the set; 3. Formaldehyde emission limit for furniture materials: GB 18584-2001: Applicable to laminated table shelf and any bonded components, sets maximum permitted formaldehyde release for indoor office use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
