纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2400 × 2400 × 760 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Seating capacity	10 persons
Table static load capacity	200 kg distributed load
Table net weight	165 kg
Floor protection load point	12 support points for the complete set
Recommended serving clearance	800 mm between chair back and nearest wall
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg
Caster Rolling Durability Reference	Acceptance target 30000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop surface	Light grey engineered stone or resin-composite marble-look panel with polished finish
Table edge and trim	Walnut-tone wood veneer over engineered wood substrate with rounded edge banding
Lazy susan	Wood-veneer rotating disc with four-segment radial grain and matching raised rim
Pedestal base	Walnut-tone veneered engineered wood enclosure with vertical dividers and circular lower plinth
Chair upholstery	Two-tone beige and cognac-brown synthetic leather or leather-look fabric over padded shell
Seat cushion structure	40 mm high-resilience polyurethane foam over a board or plywood seat support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Central rotating service	The 1000 mm lazy susan rotates 360 degrees for shared dish access and uses a concealed center bearing
Ten-place circular dining layout	The round table provides equal radial seating positions with 350 mm knee depth and 680 mm under-table height
Chair support and movement	Each chair uses four tapered steel legs with glides and is designed as a pull-up dining chair without casters or recline mechanism
Table support and floor loading	The central pedestal transfers the top load through a circular base and keeps the perimeter free of obstructive corner legs

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Table carton size	2480 x 2480 x 220 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Private dining room	Suited to hotel private rooms, club lounges, and executive dining rooms because the 2400 mm table seats ten adults with shared lazy-susan service.
Restaurant or hospitality suite	Suitable for upscale Chinese or fusion dining layouts where a quiet two-tone upholstered chair and stone-look top support frequent guest turnover.

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Upholstered seating safety recommendation	EN 16139:2013+AC:2013 strength, durability, and safety for non-domestic seating
Table safety and stability recommendation	EN 1730:2000 test methods for table stability, strength, and durability
Formaldehyde panel recommendation	EN 13986:2004+A1:2015 wood-based panel performance requirements with E1 emission class
Upholstery ignitability recommendation	EN 1021:2014 cigarette ignition test for upholstered seating if hospitality fire specification is required
Furniture surface recommendation	EN 12720:2009+A1:2013 resistance to cold liquids and EN 15185:2005 abrasion assessment for chair and table surfaces

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Occasional-use seating recommendation	ANSI/BIFMA X5.11:2015 general-purpose office lounge seating tests for vertical load, leg strength, stability, and cyclic use
Table verification recommendation	BIFMA G2013ergonomic guideline for fixed work and dining surface height, using 760 mm as a conventional dining height
Furniture emissions recommendation	ANSI/BIFMA e2019furniture sustainability standard chemical and material sections for formaldehyde and material disclosure

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Formaldehyde emission recommendation	GB/T 39600E0 limit for artificial wood boards used in the tabletop substrate, edge trim, pedestal, and chair supports
Wood furniture quality recommendation	GB/T 3324 general technical requirements for wooden furniture, covering dimensions, workmanship, stability, and finish inspection
Upholstered furniture safety recommendation	GB 28007for upholstered furniture safety if the chair covering or filling is supplied into the Chinese market
Furniture mechanical test recommendation	GB/T 10357.7table stability and GB/T 10357.6floor durability by foot impact

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Formaldehyde emission recommendation：GB/T 39600E0 limit for artificial wood boards used in the tabletop substrate, edge trim, pedestal, and chair supports；
2. Wood furniture quality recommendation：GB/T 3324 general technical requirements for wooden furniture, covering dimensions, workmanship, stability, and finish inspection；
3. Upholstered furniture safety recommendation：GB 28007for upholstered furniture safety if the chair covering or filling is supplied into the Chinese market；
4. Furniture mechanical test recommendation：GB/T 10357.7table stability and GB/T 10357.6floor durability by foot impact；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RDT-MARBLE-LS10-CHR

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RDT-MARBLE-LS10-CHR

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RDT-MARBLE-LS10-CHR打开导出工具

页面快速操作

发布采购询价

产品描述

The round marble-look dining table set creates a generous ten-place circular dining layout with a calm, contemporary appearance. At its center is a large light grey engineered stone or resin-composite marble-look tabletop with a polished finish, bordered by walnut-tone wood veneer over engineered wood and rounded edge banding. The matching rotating center features a wood-veneer disc with a four-segment radial grain and raised rim, adding a refined visual focal point while supporting shared service. A substantial pedestal base uses walnut-tone veneered engineered wood, vertical dividers, and a circular lower plinth, giving the table a structured silhouette without corner legs around the seating perimeter. The set includes ten upholstered armchairs. Each chair has a padded shell upholstered in two-tone beige and cognac-brown synthetic leather or leather-look fabric. The seat combines a board or plywood support with 40 mm high-resilience polyurethane foam, and the finished cushion is 90 mm thick. Backrest padding is 70 mm thick, with a 240 mm lumbar support zone and 540 mm clear width between the arms. Four tapered steel legs with glides provide a clean, modern line and allow the chairs to be pulled up smoothly; they are supplied without casters or recline mechanisms. Functionally, the 1000 mm lazy susan rotates through 360 degrees on a concealed center bearing, making shared dishes easily accessible from every seat. The round table offers equal radial seating positions, 350 mm knee depth, and 680 mm under-table height. Its central pedestal transfers the tabletop load through a circular base and keeps the surrounding area open, while the complete set distributes floor contact through 12 support points. The table is rated for a 200 kg distributed static load and has a net weight of 165 kg. This set is well suited to hotel private dining rooms, club lounges, executive dining rooms, upscale Chinese restaurants, fusion dining spaces, and hospitality suites. Its seating capacity and lazy-susan service also make it appropriate for large residential dining rooms designed around shared meals. For procurement and space planning, allow 800 mm between chair backs and the nearest wall for serving and movement. Confirm finish options, delivery access, and assembly requirements before purchase; the referenced package configuration is two cartons per set, with a noted assembly time of 40 minutes. The table carton is 2480 by 2480 by 220 mm, so entryways, lifts, and installation routes should be checked carefully.

Round Marble-Look Dining Table with Lazy Susan and Ten Upholstered Dining Chairs Specifications

供应商与现货