Round Marble-Look Dining Table with Lazy Susan and Ten Upholstered Dining Chairs (model RDT-MARBLE-LS10-CHR) is listed under restaurant table. Dimensions: 2400 × 2400 × 760 mm. Materials: Light grey engineered stone or resin-composite marble-look panel with polished finish. Load capacity: 200 kg distributed load. Product Features: round,dining,set,marble-look,top,lazy,susan,ten-seat,layout,upholstered,armchairs,pedestal,base. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | LIANKEN | Model | RDT-MARBLE-LS10-CHR |
| Overall dimensions (W × D × H) | 2400 × 2400 × 760 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Seating capacity | 10 persons |
| Table static load capacity | 200 kg distributed load | Table net weight | 165 kg |
| Floor protection load point | 12 support points for the complete set | Recommended serving clearance | 800 mm between chair back and nearest wall |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | Back Foam Density Reference | 38 kg/m³ |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles | Tabletop surface | Light grey engineered stone or resin-composite marble-look panel with polished finish |
| Table edge and trim | Walnut-tone wood veneer over engineered wood substrate with rounded edge banding | Lazy susan | Wood-veneer rotating disc with four-segment radial grain and matching raised rim |
| Pedestal base | Walnut-tone veneered engineered wood enclosure with vertical dividers and circular lower plinth | Chair upholstery | Two-tone beige and cognac-brown synthetic leather or leather-look fabric over padded shell |
| Seat cushion structure | 40 mm high-resilience polyurethane foam over a board or plywood seat support | Central rotating service | The 1000 mm lazy susan rotates 360 degrees for shared dish access and uses a concealed center bearing |
| Ten-place circular dining layout | The round table provides equal radial seating positions with 350 mm knee depth and 680 mm under-table height | Chair support and movement | Each chair uses four tapered steel legs with glides and is designed as a pull-up dining chair without casters or recline mechanism |
| Table support and floor loading | The central pedestal transfers the top load through a circular base and keeps the perimeter free of obstructive corner legs | Table carton size | 2480 x 2480 x 220 mm |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Carton Dimensions | 850× 420× 720 mm | Reference Packaged Gross Weight | 23 kg/set |
| Reference Carton Volume | 0.26 m³/set | Private dining room | Suited to hotel private rooms, club lounges, and executive dining rooms because the 2400 mm table seats ten adults with shared lazy-susan service. |
| Restaurant or hospitality suite | Suitable for upscale Chinese or fusion dining layouts where a quiet two-tone upholstered chair and stone-look top support frequent guest turnover. | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2400 × 2400 × 760 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Seating capacity | 10 persons | |
|---|---|---|
| Table static load capacity | 200 kg distributed load | |
| Table net weight | 165 kg | |
| Floor protection load point | 12 support points for the complete set | |
| Recommended serving clearance | 800 mm between chair back and nearest wall | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg | |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop surface | Light grey engineered stone or resin-composite marble-look panel with polished finish | |
|---|---|---|
| Table edge and trim | Walnut-tone wood veneer over engineered wood substrate with rounded edge banding | |
| Lazy susan | Wood-veneer rotating disc with four-segment radial grain and matching raised rim | |
| Pedestal base | Walnut-tone veneered engineered wood enclosure with vertical dividers and circular lower plinth | |
| Chair upholstery | Two-tone beige and cognac-brown synthetic leather or leather-look fabric over padded shell | |
| Seat cushion structure | 40 mm high-resilience polyurethane foam over a board or plywood seat support |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Central rotating service | The 1000 mm lazy susan rotates 360 degrees for shared dish access and uses a concealed center bearing | |
|---|---|---|
| Ten-place circular dining layout | The round table provides equal radial seating positions with 350 mm knee depth and 680 mm under-table height | |
| Chair support and movement | Each chair uses four tapered steel legs with glides and is designed as a pull-up dining chair without casters or recline mechanism | |
| Table support and floor loading | The central pedestal transfers the top load through a circular base and keeps the perimeter free of obstructive corner legs |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Table carton size | 2480 x 2480 x 220 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Private dining room | Suited to hotel private rooms, club lounges, and executive dining rooms because the 2400 mm table seats ten adults with shared lazy-susan service. | |
|---|---|---|
| Restaurant or hospitality suite | Suitable for upscale Chinese or fusion dining layouts where a quiet two-tone upholstered chair and stone-look top support frequent guest turnover. |
EU Market Access Requirements* EN Standards
| Upholstered seating safety recommendation | EN 16139:2013+AC:2013 strength, durability, and safety for non-domestic seating | |
|---|---|---|
| Table safety and stability recommendation | EN 1730:2000 test methods for table stability, strength, and durability | |
| Formaldehyde panel recommendation | EN 13986:2004+A1:2015 wood-based panel performance requirements with E1 emission class | |
| Upholstery ignitability recommendation | EN 1021:2014 cigarette ignition test for upholstered seating if hospitality fire specification is required | |
| Furniture surface recommendation | EN 12720:2009+A1:2013 resistance to cold liquids and EN 15185:2005 abrasion assessment for chair and table surfaces |
US and Canada office-furniture standards
| Occasional-use seating recommendation | ANSI/BIFMA X5.11:2015 general-purpose office lounge seating tests for vertical load, leg strength, stability, and cyclic use | |
|---|---|---|
| Table verification recommendation | BIFMA G2013ergonomic guideline for fixed work and dining surface height, using 760 mm as a conventional dining height | |
| Furniture emissions recommendation | ANSI/BIFMA e2019furniture sustainability standard chemical and material sections for formaldehyde and material disclosure |
Standards applicable to China-market projects
| Formaldehyde emission recommendation | GB/T 39600E0 limit for artificial wood boards used in the tabletop substrate, edge trim, pedestal, and chair supports | |
|---|---|---|
| Wood furniture quality recommendation | GB/T 3324 general technical requirements for wooden furniture, covering dimensions, workmanship, stability, and finish inspection | |
| Upholstered furniture safety recommendation | GB 28007for upholstered furniture safety if the chair covering or filling is supplied into the Chinese market | |
| Furniture mechanical test recommendation | GB/T 10357.7table stability and GB/T 10357.6floor durability by foot impact |
This product must meet the following technical requirements: 1. Formaldehyde emission recommendation: GB/T 39600E0 limit for artificial wood boards used in the tabletop substrate, edge trim, pedestal, and chair supports; 2. Wood furniture quality recommendation: GB/T 3324 general technical requirements for wooden furniture, covering dimensions, workmanship, stability, and finish inspection; 3. Upholstered furniture safety recommendation: GB 28007for upholstered furniture safety if the chair covering or filling is supplied into the Chinese market; 4. Furniture mechanical test recommendation: GB/T 10357.7table stability and GB/T 10357.6floor durability by foot impact; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp