| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall dimensions | 900 x 400 x 1800 mm | |
|---|---|---|
| Single compartment internal dimensions | 420 x 370 x 410 mm | |
| Door panel thickness | 0.8 mm | |
| Cabinet body panel thickness | 0.6 mm | |
| Vent grille perforation diameter | 6 mm | |
| Recessed handle projection | 12 mm | |
| Base plinth height | 50 mm | |
| Card holder slot size | 90 x 50 mm | |
| Internal shelf thickness | 0.6 mm | |
| Center vertical partition thickness | 0.6 mm | |
| Door swing angle | 180 degrees | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
净重 / 最大承重 / 适用人数 / 耐久性能
| Net weight per unit | 45 kg | |
|---|---|---|
| Per-compartment static load capacity | 25 kg | |
| User capacity | 8 individual users | |
| Door open/close cycle durability | 50000 cycles | |
| Powder coating abrasion resistance | 2000 cycles | |
| Lock security rating | Keyed to differ, 2 keys per lock | |
| Unit stability floor load | 100 kg horizontal force without tipping | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Door panels | 0.8mm cold-rolled steel sheet, light grey epoxy-polyester powder coated finish | |
|---|---|---|
| Cabinet frame, sides and back | 0.6mm cold-rolled steel sheet, matching light grey powder coated finish | |
| Horizontal tier partitions | 0.6mm cold-rolled steel, welded to internal frame for rigid compartment separation | |
| Vertical center divider | 0.6mm cold-rolled steel, welded to top and base to separate 2 door columns | |
| Door hinges | 1.5mm steel pin hinges, zinc plated for corrosion resistance, welded to door and side frame | |
| Cam locks | Zinc alloy housing, brass lock cylinder, chrome plated finish, fitted with 2 brass keys per compartment | |
| Recessed door handles | Zinc alloy pull, chrome plated finish, integrated with lock cylinder | |
| Vent perforations | Punched 6mm round holes in lower section of every door, no additional grille insert | |
| Card holders | Recessed steel slot on upper section of each door, clear plastic label window insert | |
| Base plinth | 1.0mm folded steel base, welded to cabinet bottom for floor support | |
| Surface finish | Epoxy-polyester electrostatic powder coat, 80 micron film thickness, acid washed and phosphated pre-treatment | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Individual locking compartments | 8 separate lockable doors, each fitted with independent key cam lock to secure personal belongings for separate users | |
|---|---|---|
| Door ventilation | Punched perforated vents on each door enable continuous air circulation to prevent musty odors from stored clothing or bags | |
| User identification | Recessed card holder slot on each door holds removable name or number labels for easy locker assignment | |
| Flush door design | Recessed handles and no external protrusions eliminate snag hazards in high-traffic walkways | |
| Freestanding installation | Reinforced folded steel base allows placement on level hard floors without wall fixing, optional anti-tip kit available for high-use areas | |
| Full compartment access | Hinged doors open 180 degrees to provide unobstructed access to full compartment interior for loading and cleaning | |
| Smooth edge treatment | All steel panel edges are folded and deburred to eliminate sharp edges for user safety | |
| Stacking compatibility | Reinforced top frame supports vertical stacking of identical units for multi-tier bank installations | |
| Lock cylinder diameter | 18 mm | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Number of shipping packages | 1 | |
|---|---|---|
| Shipping carton dimensions | 950 x 450 x 1850 mm | |
| Gross shipping weight | 50 kg | |
| Shipping volume per unit | 0.79 CBM | |
| On-site assembly time | 20 minutes | |
| 20ft GP container loading quantity | 36 units | |
| 40ft HQ container loading quantity | 92 units | |
| Inner packaging material | 5-layer corrugated carton, expanded polystyrene corner protectors, PE stretch wrap, plastic hardware bag with keys and installation instructions | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
推荐空间 / 目标用户 / 使用方式
| Office staff changing rooms | Provides secure individual storage for personal items, bags and work clothing for office and facility employees | |
|---|---|---|
| Factory and workshop staff areas | Durable steel construction withstands heavy daily use in industrial environments for worker personal storage | |
| School and university dormitory/campus facilities | 8 individual compartments serve student storage needs with ventilated design suitable for sports gear and books | |
| Gym and fitness center changing areas | Ventilated doors prevent odor buildup from stored workout clothing and athletic gear | |
| Public service and government facility cloakrooms | Keyed individual locks provide secure temporary storage for visitors and staff in public buildings | |
| Modular locker bank configurations | Standard 900mm width allows multiple units to be bolted side by side to create continuous locker rows for high-capacity facilities |
欧洲市场准入与化学品要求
| EN 14073-2:2004 | Applicable European standard for office storage furniture safety and structural strength requirements for steel lockers | |
|---|---|---|
| EN 16121:2013 | Applicable standard for non-domestic storage furniture durability, stability and strength performance requirements | |
| EN 1023-2:2000 | Applicable test standard for office furniture storage units stability under vertical and horizontal load |
美国及加拿大办公家具标准
适用于中国市场项目的标准
| GB/T 3327-2017 | Applicable standard for metal storage furniture dimensional tolerance, structural strength and coating performance requirements for steel lockers | |
|---|---|---|
| GB 18584-2001 | Applicable indoor furniture hazardous substance emission limit for formaldehyde and heavy metal content from surface coatings | |
| GB/T 4893.8-2013 | Applicable test standard for furniture surface coating abrasion resistance for powder coated metal surfaces |
本产品须满足以下技术参数要求： 1. GB/T 3327-2017：Applicable standard for metal storage furniture dimensional tolerance, structural strength and coating performance requirements for steel lockers； 2. GB 18584-2001：Applicable indoor furniture hazardous substance emission limit for formaldehyde and heavy metal content from surface coatings； 3. GB/T 4893.8-2013：Applicable test standard for furniture surface coating abrasion resistance for powder coated metal surfaces； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具The YUANTONG 8-Door Vertical Metal Storage Locker (model MLK-8D-2C4T) is a steel staff storage unit built with a clean, functional dual-column, four-tier layout, finished in a uniform light grey epoxy-polyester powder coat for a cohesive, professional appearance across all exterior and interior panels. Its flush-fit door design integrates recessed chrome-plated zinc alloy handles with no external protrusions, creating a smooth, snag-free profile suitable for busy walkways. Each door features a punched round vent array at the lower section and a recessed card holder slot at the upper section for clear user identification, and the unit sits on a rsed folded steel base plinth that elevates storage compartments off the floor. The cabinet body, horizontal tier partitions, and central vertical divider are fabricated from cold-rolled sheet metal, with heavier-gauge steel used for door panels, and steel pin hinges welded to both door edges and side frames for durable operation. A zinc alloy cam lock with brass cylinder is fitted to each door, supplied with two keys per compartment, and all exposed steel edges are folded and deburred for safety. The unit offers eight independent locking compartments, each sized to hold light personal items such as bags, clothing, books, or athletic gear. Each hinged door opens a full 180 degrees for unobstructed access during loading or routine cleaning, while door perforations enable consistent r circulation to reduce musty odors from stored items. The freestanding unit rests stably on level hard floors, with an optional anti-tip kit available for high-traffic zones, and its reinforced top frame supports vertical stacking of identical units; its standard width also allows side-by-side bolting to create continuous locker banks for higher-capacity installations. This locker is well suited for a wide range of spaces, including office staff changing rooms, factory and workshop employee areas, school and university dormitory or campus facilities, gym and fitness center changing areas, and public service or government facility cloakrooms. For procurement planning, note that the welded cabinet body ships as a single assembled unit with pre-hung doors, requiring only minimal on-site setup for lock inspection, leveling adjustments, and optional anchor fitting. Procurement specifications reference a 5-year warranty for the structure and 3-year warranty for hardware, with a durable powder coat finish and lock and hinge hardware rated for repeated long-term commercial use.
关注我们