纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1850 × 750 × 1800 mm
Single seat width	560 mm
Seat height from floor	450 mm
Seat depth	480 mm
Backrest height above seat	820 mm
Headrest dimensions	280 x 180 x 50 mm
Armrest height above seat	220 mm
IV pole height above seat	1350 mm
Frame leg spread width	680 mm
Knee clearance under seat	320 mm
Perforated back panel thickness	1.2 mm
Seat cushion padding thickness	40 mm
Floor glide diameter	30 mm
IV pole tube diameter	19 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Seating capacity	3 users
Per-seat static load capacity	150 kg
Net product weight	42 kg
Floor contact point static load per leg	130 kg
Seat cushion compression resistance	40000 cycles
Seat cushion compression fatigue resistance	40000 cycles
Upholstery abrasion resistance	50000 Martindale cycles
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Main support beam	1.5mm thick chrome-plated rectangular steel tube
Back support mesh	Perforated 1.2mm thick cold-rolled steel with chrome plating
Seat and back padding	40mm thick high-density polyurethane foam
Upholstery	0.8mm thick medical-grade blue polyurethane (PU) leather
Armrests	1.0mm thick chrome-plated steel tube with PU-padded tops
IV poles	19mm diameter polished stainless steel tube
Support legs	25mm diameter chrome-plated steel cantilever tubes
Floor glides	30mm diameter non-slip black rubber pads
Seam construction	Reinforced nylon stitching at 8mm pitch
Ventilated back support panel	1.2mm thick perforated cold-rolled steel with chrome plating
Seat, back and headrest padding	40mm thick high-density polyurethane foam
Armrest assemblies	1.0mm thick chrome-plated steel tube frame with PU-padded tops

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

IV bag suspension	3 dedicated height-adjustable IV poles with dual hooks per pole
Fixed upright seating position	105 degree fixed backrest recline angle
Integrated head support	Padded fixed headrest aligned to adult cervical spine height
Ventilated back support	Perforated steel mesh mid-back section between padded lumbar and upper back panels
Floor stability adjustment	Adjustable threaded rubber glides on each leg
Surface disinfection compatibility	Smooth non-porous PU upholstery and chrome-plated metal surfaces
Beam-mounted modular construction	All seat assemblies mounted to a continuous central steel beam
Disinfection compatibility	Smooth non-porous PU upholstery and chrome-plated metal surfaces
Cantilever leg floor clearance	180mm minimum clearance under seat between support legs
Recline Angle / Lock Reference	125° with 3 suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Number of shipping packages	2 packages
Main shipping carton dimensions	1900 x 780 x 320 mm
Accessory shipping carton dimensions	1850 x 150 x 150 mm
Total shipping gross weight	48 kg
Total shipping volume	0.52 CBM
On-site assembly time	20 minutes
20ft GP container loading quantity	52 units
40ft HQ container loading quantity	126 units
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Hospital outpatient infusion rooms	Designed for multi-patient IV therapy seating, with dedicated IV poles per position and easy-to-disinfect surfaces for clinical infection control
Clinic waiting and treatment areas	Suitable for community health centers, specialist clinics and vaccination centers for extended patient seating
Emergency department observation zones	Fixed stable seating for short-term patient monitoring, with integrated head support for patient comfort during post-treatment observation
Blood donation centers	Accommodates donors during phlebotomy and post-donation recovery, with upright seating position and armrest support for clinical access
High-traffic public service waiting areas	Can be deployed in public health stations, service hall medical service points for visitor seating
Community health clinic treatment areas	Suitable for community health centers, specialist clinics and vaccination centers for extended patient seating
Public health service waiting areas	Deployable in public health stations, service hall medical service points and workplace health rooms for visitor and staff seating
Pediatric clinic waiting zones	Configurable as adjacent adult/child seating in pediatric outpatient areas, with smooth rounded edges to eliminate child injury risks

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Applicable standard for non-domestic seating strength	EN 16139:2013 Furniture – Strength, durability and safety – Non-domestic seating
Applicable standard for surface fire resistance	EN 1021:2014 Furniture – Assessment of the ignitability of upholstered furniture – Part 1: Ignition source smouldering cigarette
Non-domestic seating performance	EN 16139:2013 Furniture – Strength, durability and safety – Non-domestic seating
Upholstered furniture ignitability	EN 1021:2014 Furniture – Assessment of the ignitability of upholstered furniture – Part 1: Ignition source smouldering cigarette
Medical furniture surface cleanability	EN 14465:2003 Textiles – Upholstery fabrics – Specification for resistance to soiling and cleanability

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.4 公共及休闲座椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Applicable standard for metal public seating	GB/T 3324 General technical requirements for metal furniture
Applicable standard for medical furniture safety	GB 9706.1 Medical electrical equipment – Part 1: General requirements for basic safety and essential performance
Applicable standard for furniture mechanical durability	GB/T 10357.3 Test of mechanical properties of furniture – Strength and durability of chairs and stools
Metal furniture general requirements	GB/T 3324 General technical requirements for metal furniture
Furniture mechanical durability for seating	GB/T 10357.3 Test of mechanical properties of furniture – Strength and durability of chairs and stools
Upholstered furniture fire safety	GB 20286 Fire safety requirements for public place furnishings and components

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Applicable standard for metal public seating：GB/T 3324 General technical requirements for metal furniture；
2. Applicable standard for medical furniture safety：GB 9706.1 Medical electrical equipment – Part 1: General requirements for basic safety and essential performance；
3. Applicable standard for furniture mechanical durability：GB/T 10357.3 Test of mechanical properties of furniture – Strength and durability of chairs and stools；
4. Metal furniture general requirements：GB/T 3324 General technical requirements for metal furniture；
5. Furniture mechanical durability for seating：GB/T 10357.3 Test of mechanical properties of furniture – Strength and durability of chairs and stools；
6. Upholstered furniture fire safety：GB 20286 Fire safety requirements for public place furnishings and components；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · INF-CHR-3S-IV-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · INF-CHR-3S-IV-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · INF-CHR-3S-IV-001打开导出工具

页面快速操作

发布采购询价

产品描述

The 3-Seat Infusion Waiting Chair with IV Poles is a purpose-built public medical seating solution designed for high-turnover clinical and public service environments, with a streamlined, connected beam layout that integrates three individual seating positions in a single continuous unit. Its visual profile presents smooth blue padded upholstered sections with bright chrome-plated metal framing and polished stainless steel IV poles, creating a clean, clinical aesthetic that aligns with standard healthcare facility design standards. Each seating position features a dedicated padded headrest, padded armrests with rounded edges, and a ventilated perforated steel back panel positioned between padded lumbar and upper back sections to support air circulation during extended seating. Built for heavy public use, the chair’s core structure relies on a chrome-plated rectangular steel main support beam connected to cantilevered chrome-plated steel legs, finished with non-slip adjustable rubber floor glides that prevent floor scratching and enable stable leveling on uneven surfaces. Seating surfaces use high-density polyurethane foam padding covered in smooth, medical-grade PU upholstery, with reinforced nylon stitching to resist seam separation under repeated use. Each seat is provided with a dedicated polished stainless steel IV pole mounted behind the position, fitted with dual hooks and a locking knob for height adjustment to accommodate standard gravity infusion setups. The fixed upright backrest angle is engineered for extended seating comfort during treatment or waits, while all smooth non-porous upholstery and metal surfaces are compatible with standard hospital-grade disinfectants for routine infection control. The cantilever leg design creates open clearance under the seat to support unobstructed floor cleaning and staff foot traffic around seated users. This seating solution is well suited for a range of spaces including hospital outpatient infusion rooms, community health clinic treatment and waiting areas, emergency department observation zones, blood donation centers, public health service waiting stations, workplace health rooms, and pediatric clinic waiting zones, where its rounded edge profiles reduce injury risks for all user groups including unsupervised children. For procurement teams, key considerations include noting the split two-package shipping structure, which separates the main frame and seat assembly from IV pole accessories to simplify transport, with on-site assembly requiring only basic tools to secure poles, glides and hardware. The durable construction is rated to support consistent high daily user turnover, with abrasion-resistant upholstery and cyclic load performance tailored for continuous public use, and wipe-clean surfaces that reduce long-term facility maintenance costs. Bulk shipping configurations support high-volume orders for large facility outfitting projects, with nested stacking to maximize container utilization for freight efficiency.

3-Seat Infusion Waiting Chair with IV Poles Specifications

供应商与现货