纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	680 × 850 × 1150 mm
Seat height from floor	450 mm
Seat width	520 mm
Seat depth	480 mm
Backrest height	700 mm
Headrest dimensions	320 x 200 x 80 mm
Armrest height from seat	220 mm
IV pole height from floor	1800 mm
IV hook quantity	2 hooks
Leg spread width (base)	650 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net product weight	28 kg
Maximum static user weight capacity	150 kg
Backrest static load capacity	80 kg
IV pole maximum vertical load	10 kg
Recline mechanism cycle life	12000 cycles
Floor glide static friction coefficient	0.6
Upholstery abrasion resistance	50000 double rubs
Frame corrosion resistance	1000 hours
Upholstery fluid repellency rating	4 grade
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Primary frame construction	25mm diameter chrome-plated cold-rolled steel tube, 1.5mm wall thickness
Seat, back and headrest padding	40mm high-resilience polyurethane foam, 40kg/m3 density
Upholstery fabric	Medical-grade green polyester fabric, anti-bacterial, fluid-repellent finish
Armrests	Bent steel support frame with dark wood-grain laminated composite arm pads
IV pole construction	19mm diameter chrome-plated steel tube, height-adjustable with 2 chrome-plated steel hooks
Recline adjustment hardware	Black powder-coated steel locking hinge mechanism with manual release lever
Floor contact glides	30mm diameter non-marking black rubber fixed glides
Underseat support panel	Perforated steel support mesh under seat cushion
Seam construction	Stitched upholstery seams, 8 stitches per inch seam pitch
Frame finish	Triple-layer polished chrome plating with corrosion-resistant clear topcoat
Primary structural frame	25 mm diameter chrome-plated cold-rolled steel tube, 1.5 mm wall thickness
Armrest assemblies	12 mm bent chrome-plated steel support frames with dark wood-grain laminated composite arm pads, 2 mm edge banding

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Backrest recline adjustment	Manual ratchet locking mechanism, 4 locking positions between 95 degrees upright and 160 degrees full recline, release via under-seat lever
IV pole height adjustment	Tool-less height adjustment via side-mounted locking knob, 600mm vertical travel to accommodate different fluid bag heights
Fixed stable base	Four-point fixed leg design with rubber glides, no casters to prevent unwanted movement during infusion treatment
Fixed position armrests	Rigid curved armrests positioned to support patient arms during IV access and extended seating, no flip or height adjustment
Integrated head support	Fixed padded headrest positioned to support neck and head in both upright and reclined positions
Easy-clean surface design	Smooth chrome frame and non-porous upholstery allow disinfection between patient uses
Dual IV bag support	Two curved hooks at top of IV pole support hanging of standard IV fluid bags or infusion pump accessories
Corrosion-resistant construction	All metal components use chrome plating suitable for regular clinical disinfection wipe-down
Reclined overall depth	1200 mm
Backrest recline angle range	110 degrees
Static stable base support	Four-point splayed fixed leg design with rubber glides, no casters to prevent unwanted movement during IV cannulation and treatment
Fixed forearm support armrests	Rigid triangulated wire-frame armrests positioned to support full patient forearms during IV access and extended seating, no flip-up or height adjustment capability

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Number of shipping packages	1 unit
Shipping carton dimensions	820 x 680 x 900 mm
Gross shipping weight	32 kg
Shipping volume per unit	0.5 CBM
Assembly time on site	15 minutes
20ft GP container loading quantity	52 units
40ft HQ container loading quantity	124 units
Packaging materials	5-layer corrugated carton, EPS foam edge protection, polyethylene film wrap
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Hospital outpatient infusion centers	Designed for extended patient seating during intravenous therapy, with recline function and integrated IV pole for clinical workflow efficiency
Clinic treatment rooms	Suitable for minor procedure and observation use, with stable fixed base and easy-clean surfaces for repeated patient use
Blood donation centers	Adjustable recline position supports donor comfort during phlebotomy and post-donation recovery periods
Community health service centers	Durable construction and compact footprint suit high-volume public primary care settings
Post-operative recovery wards	Reclining position and padded support accommodate patients requiring short-duration seated recovery after procedures
Dialysis center waiting and treatment zones	Durable fabric and load-rated frame support extended seating sessions for outpatient dialysis care
Configuration recommendation	Place at 1200mm minimum spacing between adjacent chairs to allow clinical staff access to patients from all sides during IV administration
General practice clinic treatment rooms	Suitable for minor procedure use and short-term patient observation, with stable fixed base and disinfection-compatible surfaces for high patient turn-over

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139:2013	Applicable European standard for non-domestic seating strength, durability and safety, recommended for structural load testing
EN 13722:2004	Applicable standard for furniture seating test methods for stability, recommended for verification of fixed leg stability in all recline positions

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.4 公共及休闲座椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3328-2016	Applicable standard for metal furniture general technical requirements, recommended for frame strength and finish quality inspection
GB 28007-2011	Applicable standard for children's and institutional furniture safety, recommended for edge rounding and structural safety verification for clinical use
GB/T 19001-2016	Applicable quality management system standard for medical furniture supply chain consistency
GB/T 16799-2008	Furniture upholstery fabric performance standards, recommended for abrasion resistance and color fastness verification for clinical cleaning protocols

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3328-2016：Applicable standard for metal furniture general technical requirements, recommended for frame strength and finish quality inspection；
2. GB 28007-2011：Applicable standard for children's and institutional furniture safety, recommended for edge rounding and structural safety verification for clinical use；
3. GB/T 19001-2016：Applicable quality management system standard for medical furniture supply chain consistency；
4. GB/T 16799-2008：Furniture upholstery fabric performance standards, recommended for abrasion resistance and color fastness verification for clinical cleaning protocols；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MED-INF-CHR-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MED-INF-CHR-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MED-INF-CHR-001打开导出工具

页面快速操作

发布采购询价

产品描述

The KERTE MED-INF-CHAIR-001 Reclining Medical Infusion Chair with Integrated IV Pole is a purpose-built clinical seating solution designed to balance patient comfort, clinical functionality, and long-term durability in high-traffic care environments. Visually, the chair presents a streamlined, functional profile with a polished chrome tubular frame, dark green medical-grade upholstered seat, backrest, and fixed padded headrest, paired with dark wood-grain finished arm pads for a warm, approachable clinical aesthetic. Its four-point splayed fixed leg base terminates in non-marking black rubber glides, with no casters to prevent unintended movement during care, and a height-adjustable chrome IV pole mounts to the left side of the frame, finished with two curved hooks for infusion supplies.
Construction centers on a robust chrome-plated cold-rolled steel tube frame, finished with a triple-layer polished chrome coating and corrosion-resistant clear topcoat to withstand regular hospital-grade disinfection. Seat, backrest, and headrest cushions use high-resilience polyurethane foam, upholstered in anti-bacterial, fluid-repellent medical-grade polyester fabric with tightly stitched seams for easy cleaning; a perforated steel support mesh sits beneath the seat cushion for consistent, breathable support. Armrests are built on triangulated bent chrome steel supports, fitted with laminated composite wood-grain pads positioned at a fixed height ideal for forearm support during IV access. The integrated IV pole uses chrome-plated steel tubing, while the manual recline mechanism relies on a powder-coated steel locking hinge with an under-seat release lever.
Practically, the chair offers four locked recline positions ranging from upright seating to full recline via a simple manual lever, with tool-less height adjustment for the IV pole to accommodate different infusion setups. The fixed armrests and dedicated padded headrest support patients across upright and reclined positions, while smooth, non-porous surfaces across the frame and upholstery enable fast, thorough disinfection between patient uses. The static base provides stable support during IV cannulation and treatment, with load ratings suited to diverse patient needs and durable upholstery engineered to withstand repeated heavy use.
This chair is well-suited for a wide range of care settings, including hospital outpatient infusion centers, clinic treatment rooms, blood donation centers, community health service centers, post-operative recovery wards, and dialysis treatment zones. When planning layouts, mntn a minimum 1200mm gap between adjacent chairs to enable full staff access around each patient during care delivery.
For procurement, note that final assembly requires on-site attachment of the IV pole and tightening of frame hardware, with units shipped in protective corrugated packaging with foam edge protection. Buyers should confirm exact material specifications, final assembly requirements, and packaging details directly with the supplier prior to purchase, as bulk contner loading capacities are calculated for standard freight planning for high-volume orders.

Reclining Medical Infusion Chair with Integrated IV Pole Specifications

供应商与现货