纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	650 × 650 × 1260 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	16 kg
Rated user load	136 kg
Recommended user height	1900 mm
Seat foam density	45 kg/m3
Back mesh tensile rating	300 N/50 mm
Fabric abrasion resistance	50000 Martindale cycles
Gas-lift service cycles	100000 cycles
Caster rolling durability	100000 cycles
Warranty period	36 months
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Blue woven mesh or mesh-textured fabric over padded cushion
Seat cushion	45 kg/m3 high-resilience polyurethane foam, 60 mm thick
Backrest support	Tensioned blue mesh in molded framed surround with lumbar contour
Headrest	Blue mesh-covered padded cushion with internal support board
Arm supports	Black molded polymer pads on vertical tubular steel or reinforced polymer posts
Seat underframe	Black molded polymer seat shell with steel reinforcement plate
Gas lift	Black powder-coated steel telescoping gas cylinder, 50 mm outer diameter
Five-star base	Black glass-fiber-reinforced nylon or powder-coated steel star base
Casters	Black polyurethane twin-wheel casters with polymer fork and steel axle
Frame finish	Matte black powder coating or molded black polymer finish
Internal frame thickness	2.0 mm steel support plate inside seat mechanism
Seam stitch pitch	8 stitches per 50 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Full 360-degree seat rotation around the central gas-lift axis
Seat height adjustment	Pneumatic lift provides 80 mm vertical travel through an under-seat lever
Synchro tilt mechanism	Back and seat tilt synchronously with a 15-degree rear recline angle
Tilt lock	Mechanism locks in the upright position and 3 recline positions
Tension control	Rear knob adjusts recline resistance across 5 relative turns
Headrest support	Fixed-height padded headrest provides neck support with 15-degree surface contour
Arm support	Height-adjustable T-arms provide 70 mm vertical pad travel
Lumbar support	Contoured lower mesh zone provides passive lumbar contact with two flexible vent panels
Mobility	Five twin-wheel swivel casters allow movement on hard floors and low-pile carpet
Ventilation	Open woven back mesh and lower cut-out zones allow airflow across the back
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan office	Suitable for individual workstations requiring swivel access, lumbar support and all-day mobility
Home office	Fits compact desk settings where a headrest, padded seat and rolling base support long computer sessions
Manager workstation	High-back profile and adjustable arms suit executive or supervisory desks requiring prolonged seated work
Meeting and training rooms	Mobile swivel base supports quick repositioning around conference tables or training layouts
Shared-desk environment	80 mm height adjustment and 136 kg load target support rotation among multiple adult users
Hard-floor workspace	Polyurethane twin-wheel casters are specified for tile, wood, laminate and low-pile carpet floors
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EOCH-MESH-BL-520

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EOCH-MESH-BL-520

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EOCH-MESH-BL-520打开导出工具

页面快速操作

发布采购询价

产品描述

The Blue Mesh High-Back Ergonomic Office Chair with Headrest, model EOCH-MESH-BL-520, combines a structured high-back silhouette with breathable blue mesh and black support components. Its tall backrest follows a centered lumbar contour, while the padded mesh-covered headrest creates a continuous neck-support zone above the chair. Black T-shaped armrests frame a 540 mm clear seating width, and the five-star base with twin-wheel casters gives the piece a conventional task-chair footprint suited to desk-based settings. Overall dimensions are 650 x 650 x 1260 mm. Construction pairs upholstered comfort with a load-bearing metal structure. The seat uses blue woven mesh or mesh-textured fabric over a padded cushion built with 45 kg/m3 high-resilience polyurethane foam and a 60 mm cushion core; the listed finished seat cushion thickness is 90 mm. The backrest presents tensioned blue mesh within a molded framed surround, with 70 mm backrest padding and a 240 mm lumbar support zone. The headrest includes a padded cushion, blue mesh covering and an internal support board. Arm pads are black molded polymer, mounted on height-adjustable posts. Beneath the seat is a black molded polymer shell with steel reinforcement, connected to a black powder-coated steel telescoping gas cylinder. The base is specified as black glass-fiber-reinforced nylon or powder-coated steel, fitted with black polyurethane twin-wheel casters that use polymer forks and steel axles. Functionality centers on adjustable movement and support. The seat rotates through 360 degrees, and the pneumatic lift offers 80 mm of height travel controlled by an under-seat lever. A synchro tilt mechanism coordinates movement between the seat and back, with a 15-degree rear recline, lockable upright positioning and three recline positions. A rear knob provides tension control across five relative turns. The fixed-height headrest offers a 15-degree contoured surface, while the height-adjustable T-arms provide 70 mm of vertical pad travel. The chair has a rated user load of 136 kg and is recommended for users up to 1900 mm in height. The chair is suitable for open-plan workstations, home offices, manager desks, meeting and training rooms, shared-desk environments, and hard-floor workspaces including tile, wood, laminate and low-pile carpet. Its mobility supports rotation between tasks and rapid room reconfiguration. Procurement teams should note that this is an unbranded product supplied as one set in two cartons, with packaged gross weight of 23 kg and a reference assembly time of 40 minutes. The reference carton dimensions are 850 x 420 x 720 mm, carton volume is 0.26 m3 per set, and indicative 20GP loading is 135 sets at 85 percent space utilization. Material checks should account for the stated base option and mesh or mesh-textured seat upholstery, while project planning should include assembly, floor compatibility and shared-user adjustment needs.

Blue Mesh High-Back Ergonomic Office Chair with Headrest Specifications

供应商与现货