纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	650 × 650 × 1030 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	120 kg
Static seat verification load	700 N
Backrest cyclic tilt test target	120,000 cycles
Caster rolling durability target	100,000 cycles
Base static vertical load target	1130 kg
Seat foam density	45 kg/m3
Seat foam rebound	40%
Fabric abrasion acceptance	50,000 Martindale cycles
Applicable user height	1850 mm
Product net weight	14.5 kg

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Backrest mesh	Blue flexible polyester mesh tensioned in a black molded frame
Back frame	Black injection-molded structural polymer outer frame with molded lumbar contour
Seat upholstery	Blue-gray woven textile over rounded foam cushion with visible stitched perimeter
Seat cushion	80 mm polyurethane foam on a load-bearing molded seat pan
Seat inner support	12 mm molded plywood or reinforced polymer seat pan
Armrest supports	Black fixed polymer T-shaped arms over vertical steel or polymer posts
Arm pads	90 x 60 mm black polymer contact pads with no visible height adjuster
Gas lift	50 mm black steel telescopic gas-lift assembly with polymer telescopic shroud
Mechanism housing	Black steel tilt mechanism under the seat with polymer side covers
Five-star base	Black 650 mm diameter five-star molded base with raised center hub
Casters	Five black 50 mm twin-wheel swivel casters with grip stems
Fasteners and connectors	Steel bolts, cam plates, and locking stem connectors with black protective finish

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seat height adjustment	Pneumatic lift provides 520 mm seat height through a 100 mm stroke under-seat lever
Back tilt movement	Synchronized seat-and-back tilt reclines to 15 degrees for relaxed task posture
Tilt lock	One-position upright lock secures the back at 95 degrees for focused work
Tilt tension control	Knob-style tension adjustment tunes initial back resistance for users up to 120 kg
Mobility	Five 50 mm twin casters provide omnidirectional movement and 360-degree caster swivel
Arm support	Fixed T-arm design provides forearm support but no height, width, or pivot adjustment
Lumbar support	Molded lower mesh zone and rigid frame provide passive lumbar contour without adjustable pad
Breathable back	Open blue mesh supports airflow across the upper and lower back zones
Knockdown assembly	Back, arm set, seat mechanism, gas lift, base, and casters separate for flat carton shipping
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan workstations	Use at standard 760 mm desks where users need swivel access, mobility, and breathable back support
Home office	Suitable for daily computer work in a compact study or bedroom office due to its 650 mm footprint
Shared hot-desking	Appropriate for shift or hot-desk environments because fixed arms reduce adjustment complexity
Meeting and visitor desks	Suitable for short-to-medium duration meetings at work or collaboration tables
Administrative staff seating	Target users include clerks, coordinators, and operators using computers for up to 8 hours
Hard-floor and low-pile spaces	Recommended for tile, wood, laminate, vinyl, and low-pile carpet with 50 mm twin casters
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 applicability	Use EN 1335for office-chair dimensional safety and ergonomic measurement basis
EN 1335-2 applicability	Use EN 1335for structural safety requirements including stability and strength
EN 1335-3 applicability	Recommended references: EN 1335
EN 1022 applicability	Use EN 1022 for seating stability verification on level floors

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 Test 7 applicability	Use Test 7 for static seat load verification at the specified acceptance load

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3 applicability	Use GB/T 10357.3 for seat and back strength and fatigue acceptance of office chairs
GB/T 3324 applicability	Use GB/T 3324 general wooden-furniture technical requirements if the seat pan is plywood-based
GB/T 2828.1 applicability	Use GB/T 2828.1 for sampling plans during incoming batch inspection

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3 applicability：Use GB/T 10357.3 for seat and back strength and fatigue acceptance of office chairs；
2. GB/T 3324 applicability：Use GB/T 3324 general wooden-furniture technical requirements if the seat pan is plywood-based；
3. GB/T 2828.1 applicability：Use GB/T 2828.1 for sampling plans during incoming batch inspection；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · UMB-TASK-MESH-BLK-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · UMB-TASK-MESH-BLK-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · UMB-TASK-MESH-BLK-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Mid-Back Blue Mesh Swivel Task Chair with Fixed Arms is an unbranded office task chair designed for practical daily seating in commercial and residential work settings. Its blue flexible polyester mesh back is tensioned within a black injection-molded structural polymer frame, creating a breathable visual surface with a molded lower-back contour. The blue-gray woven textile seat complements the mesh and is finished with a rounded, visibly stitched cushion over polyurethane foam. Black fixed T-shaped armrests, a black gas-lift assembly, and a black five-star base give the chair a functional office appearance while keeping the color palette restrained. The chair is built around a molded load-bearing seat pan, offered in molded plywood or reinforced polymer, with a steel telescopic gas lift and a black steel tilt mechanism beneath the seat. Polymer covers and shrouds provide a clean finish around moving components. The fixed armrests use black polymer supports and contact pads, with no visible height adjuster. Mobility is supported by five nylon twin casters mounted to the five-star base, allowing omnidirectional movement and full caster swivel. For user adjustment, the pneumatic lift is operated by an under-seat lever and sets seat height at 520 mm through a 100 mm stroke. The synchronized seat-and-back tilt reclines to 15 degrees, while a one-position upright lock secures the back at 95 degrees for focused tasks. A knob-style tension control adjusts initial back resistance for users up to 120 kg. The fixed arms provide stable forearm support but do not adjust in height, width, or pivot, and the passive lumbar contour is integrated into the lower mesh zone rather than provided by a movable pad. This model is well suited to open-plan workstations, administrative staff seating, shared hot-desks, meeting areas, and visitor desks, as well as home offices in a compact study or bedroom office. It is intended for standard desks and hard floors or low-pile carpet, including tile, wood, laminate, vinyl, and low-pile carpeting. Procurement teams should note the chair ships as one set in two cartons, with reference assembly time of 40 minutes per set, packaged gross weight of 23 kg, and carton volume of 0.26 cubic meters. The fixed arms simplify shared use but limit personalization, so buyers should assess whether users require adjustable arm support. Overall dimensions are 650 by 650 by 1030 mm, with 540 mm clear width between armrests, a 90 mm finished seat cushion, and 70 mm backrest padding thickness.

Mid-Back Blue Mesh Swivel Task Chair with Fixed Arms Specifications

供应商与现货