纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	660 × 640 × 1040 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	136 kg
Net weight	15 kg
Seat foam density	38 kg/m3
Back frame static load target	136 kg
Caster rolling durability target	100000 cycles
Gas lift cyclic durability target	100000 cycles
Seat-front impact load target	102 kg
Recommended user height range	185 cm, published as 185 cm
Seat abrasion acceptance target	50000 Martindale cycles
Warranty period	3 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Backrest support fabric	Green flexible mesh with woven geometric texture
Back frame	Black molded polymer perimeter frame supporting the mesh panel
Lumbar band	Green padded horizontal band with woven surface finish
Seat upholstery	Black woven fabric over contoured cushion
Seat cushion	80 mm molded polyurethane foam with waterfall front
Seat inner support	12 mm molded plywood or polymer seat carrier
Armrest pads	Black polymer T-pads with matte contact surface
Arm supports	Injection-molded black nylon vertical posts and underside brackets
Central column	Black steel gas lift with telescopic polymer sleeve
Mechanism housing	Black stamped-steel tilt mechanism under the seat
Five-star base	Black glass-fiber-reinforced nylon five-star base
Casters	Black twin-wheel polyurethane or nylon casters with swivel stems

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seat height adjustment	Pneumatic gas lift provides 100 mm vertical travel from 440 to 540 mm
360-degree swivel	Swivel seat rotates around the central gas-lift bearing for multi-directional access
Back recline	Synchronized tilt mechanism provides 12-degree back recline with one-position tension control
Caster mobility	Five twin-wheel casters enable rolling on hard floors and low-pile carpet
Fixed arm support	Fixed T-armrests provide forearm support at 230 mm above the seat
Lumbar contact	Green padded lower band supports the lumbar region without separate depth adjustment
Waterfall seat edge	Rounded front cushion reduces pressure concentration behind the knees
Single-position upright lock	Mechanism target includes upright back lock for focused keyboard work
Backrest recline travel	12 degrees
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan offices	Suits shared workstations where swivel access, caster mobility and medium-back support are required
Home workstations	Fits desks with 760 mm work surface height and users requiring 540 mm seat height
Meeting and computer rooms	Provides rolling seating for temporary collaboration and screen-based work
Hot-desking environments	Suitable for rotating users because the seat height adjusts over a 100 mm target travel
Administrative staff	Appropriate for keyboard, phone, and document tasks requiring forearm support and lumbar contact
Small professional studios	Green back panel adds color differentiation while black seat hides regular use marks
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 office furniture seating	Use dimensions, terminology and test-boundary requirements for task-chair procurement
EN 1335-2 safety requirements	Apply structural safety, stability and caster-related acceptance criteria
EN 1335-3 test methods	Specify laboratory test methods for strength, durability and backrest loading
EN 1022 seating stability	Use for forward, rearward and lateral overturning validation on level floors

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 office chairs	Use back, seat, base, arm and caster load tests as commercial seating acceptance criteria

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3 furniture strength and durability	Apply to seat and back static load, impact, and fatigue acceptance for office seating
GB/T 29604-2013 office chair	Use for general office-chair dimensional, safety, stability and durability procurement checks
GB/T 17927-2022 upholstered furniture safety	Use for upholstered furniture structural safety and harmful-substance inspection where applicable

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3 furniture strength and durability：Apply to seat and back static load, impact, and fatigue acceptance for office seating；
2. GB/T 29604-2013 office chair：Use for general office-chair dimensional, safety, stability and durability procurement checks；
3. GB/T 17927-2022 upholstered furniture safety：Use for upholstered furniture structural safety and harmful-substance inspection where applicable；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · TASK-MESH-GRB-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · TASK-MESH-GRB-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · TASK-MESH-GRB-01打开导出工具

页面快速操作

发布采购询价

产品描述

The TASK-MESH-GRB-01 is an unbranded ergonomic office task chair distinguished by a green mesh back, black woven-fabric seat, and black molded polymer frame. Its medium-height back combines a flexible geometric-weave mesh panel with a green padded horizontal lumbar band, creating a breathable support surface with a clear visual accent against the black seat, armrests, and five-star base. The contoured seat uses molded polyurethane foam with a waterfall front and is carried by a molded plywood or polymer inner support. Fixed black T-armrests sit between the user and the work surface, while twin-wheel casters complete the mobile task-chair form. Overall dimensions are 660 by 640 by 1040 millimeters, with 540 millimeters of clear width between the armrests and a 90-millimeter finished cushion. Construction centers on a black steel gas lift with a telescopic polymer sleeve, injection-molded nylon arm supports and underside brackets, a polymer perimeter frame, and polyurethane casters. The seat upholstery is black woven fabric over an 80-millimeter molded foam cushion specified at 38 kilograms per cubic meter. The padded lumbar band and 70-millimeter backrest padding zone provide structured contact, while the chair has a recommended user weight capacity of 136 kilograms and a net weight of 15 kilograms. Functionally, the pneumatic lift offers 100 millimeters of seat-height travel, from 440 to 540 millimeters. The seat rotates 360 degrees for multi-directional access, and the synchronized tilt mechanism provides 12 degrees of back recline with one-position tension control. Fixed armrests place the matte T-pads 230 millimeters above the seat for forearm support, and the rounded waterfall edge is intended to reduce pressure concentration behind the knees. The five twin-wheel casters support movement on hard floors and low-pile carpet. This model is suited to open-plan offices, shared workstations, home offices, meeting rooms, computer rooms, hot-desking areas, administrative workspaces, and small professional studios. It is especially relevant where rotating users need adjustable seat height, rolling access, lumbar contact, and support for keyboard, phone, or document tasks. The green back offers color differentiation, while the black seat is intended to conceal regular use marks. Procurement teams should note that each set ships in two cartons, with packaged gross weight of 23 kilograms and reference assembly time of 40 minutes. Buyers should also confirm seat-height compatibility with intended desks; the documented home-workstation reference is a 760-millimeter work surface for users requiring the 540-millimeter seat height.

Mesh Ergonomic Task Chair with Black Seat and Green Back Specifications

供应商与现货