纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	680 × 680 × 1320 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	19 kg
Recommended user weight capacity	150 kg
Suitable user height	160 to 190 cm
Recommended daily usage	8 hours
Gas-lift vertical stroke	80 mm
Back recline angle	18 degrees
Seat static load verification target	102 kg
Base static verification target	1134 kg
Caster rolling durability target	100000 cycles
Fabric abrasion acceptance target	50000 Martindale cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Backrest upholstery	Green flexible woven mesh over a contoured black outer frame
Headrest upholstery	Green mesh-covered curved headrest with padded core and black lower trim
Seat surface	Black woven fabric or performance mesh over a contoured cushion
Seat cushion	70 mm molded polyurethane foam, density target 45 kg/m3
Back cushioning	Zone-molded lumbar and upper-back padding behind mesh support
Seat inner support	12 mm molded plywood or glass-filled polypropylene load pan
Back frame	Black glass-filled nylon or reinforced polypropylene perimeter frame
Armrest pads	Black soft-touch polyurethane pads on rigid support plates
Arm supports	Black injection-molded resin or steel-reinforced posts with vertical housings
Gas lift	50 mm chrome-plated steel class-3 gas lift with black telescopic shroud
Five-star base	Black glass-filled nylon base with five curved legs and integral caster sockets
Casters	Five black twin-wheel nylon casters with steel swivel stems

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Full rotational swivel through the seat-bearing and gas-lift assembly
Pneumatic seat-height adjustment	Lever-operated gas lift provides 80 mm travel from 460 to 540 mm seat height
Synchronized recline	Back reclines up to 18 degrees with linked seat movement for posture change
Tilt lock	Multi-position lock secures the chair at upright and selected reclined angles
Tilt tension control	Rear rotary knob adjusts recline resistance for user weight between 50 and 150 kg
Headrest adjustment	Curved headrest supports height and angle adjustment with 60 mm vertical travel
4-D armrest adjustment	Arm pads support height, width, slide, and 15-degree rotation adjustments
Lumbar zone support	Contoured central back panel provides passive lower-back support without a separate external pillow
Mobile floor movement	Five twin-wheel 60 mm casters provide multi-directional rolling on hard floors and low-pile carpet
Waterfall seat front	Rounded front edge reduces pressure behind the knees during extended seated work
Recline safety margin	Mechanism and gas lift should be selected to retain stability at the full 18-degree recline
Recline Angle / Lock Reference	125° with 3suggested lock positions

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Private executive office	High-back support, headrest, and recline suit long-duration computer and meeting work at 1400 to 1800 mm desks
Open-plan workstation	680 mm footprint and five-caster mobility suit standard 1200 mm desk bays and swivel task use
Home office	Breathable green mesh and padded seat fit daily laptop or desktop work in study rooms
Hot-desking area	Swivel, rolling, height adjustment, and arm adjustment allow quick changes between users
Meeting or video-call room	Upright support and headrest make the chair suitable for discussions and virtual meetings lasting up to 2 hours
IT and design workstation	Recline and lumbar support benefit users performing screen-based design, coding, or documentation work
Procurement configuration recommendation	Order hard-floor or carpet-specific casters and confirm armrest adjustment type before bulk purchase
Recommended desk height	720 to 760 mm

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 suitability	Use dimensions and ergonomic seating geometry for office chairs as a layout and fit reference
EN 1335-2 suitability	Require structural safety verification including stability, strength, and caster-related checks
EN 1335-3 suitability	Use test methods for strength, durability, back, arm, seat, and base components
EN 1021-1 and EN 1021-2 suitability	Specify cigarette and match ignition testing for seat and back upholstery where flame retardancy is required
EN 12521 suitability	Useful only if the supplier classifies the chair as durable non-domestic seating with matching evidence

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 suitability	Applicable standards and test results require confirmation
ANSI/BIFMA e3 suitability	Use furniture sustainability criteria for material, energy, human-wellness, and social-responsibility scoring when required

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3 suitability	Apply seat and back strength and durability requirements for office seating during incoming inspection
GB/T 24821 suitability	Use multi-purpose office furniture quality and structural inspection items where applicable
GB 18584 suitability	Require indoor-furniture limited-hazard material verification for emitted and extractable pollutants
GB/T 3324 suitability	Use general wooden furniture dimensional and workmanship checks if a plywood seat shell is supplied
GB/T 26701 suitability	Industrial-film or decorative-coating requirements may be used for painted metal parts if applicable

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3 suitability：Apply seat and back strength and durability requirements for office seating during incoming inspection；
2. GB/T 24821 suitability：Use multi-purpose office furniture quality and structural inspection items where applicable；
3. GB 18584 suitability：Require indoor-furniture limited-hazard material verification for emitted and extractable pollutants；
4. GB/T 3324 suitability：Use general wooden furniture dimensional and workmanship checks if a plywood seat shell is supplied；
5. GB/T 26701 suitability：Industrial-film or decorative-coating requirements may be used for painted metal parts if applicable；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EMH-GM5D-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EMH-GM5D-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EMH-GM5D-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Green Mesh Ergonomic Executive Office Chair with Headrest, model EMH-GM5D-01, presents a high-back executive silhouette with a breathable green flexible woven backrest and matching curved headrest against black structural framing. Its black upholstered seat, black arm pads, and five-star base create a disciplined two-tone appearance suited to professional interiors. The contoured back frame, padded headrest with black lower trim, and open mesh surface give the chair a layered visual profile while preserving airflow during extended seating. Overall dimensions are 680 x 680 x 1310 to 1320 mm, the clear width between armrests is 540 mm, and the finished cushion thickness is 90 mm. Construction balances comfort and structured support. The seat uses black woven fabric or performance mesh over a contoured cushion with 70 mm molded polyurethane foam. Beneath the cushion, a molded plywood or glass-filled polypropylene load pan provides the inner support. Behind the green backrest mesh, zone-molded lumbar and upper-back padding adds localized cushioning, including a defined lumbar support zone. The perimeter frame is made from black glass-filled nylon or reinforced polypropylene, while arm supports combine black injection-molded resin or steel-reinforced posts with soft-touch polyurethane pads. A steel gas lift and twin-wheel casters complete the mobile structure. Functionality is centered on adjustability and posture variation. The chair offers full 360-degree swivel, lever-operated pneumatic seat-height adjustment from 460 to 540 mm, and synchronized recline with linked seat movement. The back reclines up to 18 degrees, and a multi-position tilt lock secures upright or selected reclined angles. A rear rotary knob controls tilt tension for users from 50 to 150 kg. The headrest adjusts in height and angle, with 60 mm of vertical travel, and the four-dimensional arm pads adjust in height, width, slide, and rotation. The chair is suitable for private executive offices, open-plan workstations, home studies, hot-desking areas, meeting or video-call rooms, and IT or design workstations. Its high back, headrest, lumbar support, and mobility make it appropriate for daily computer work, collaboration, documentation, coding, and design tasks, with a recommended daily usage target of 8 hours and support for users from 160 to 190 cm tall and up to 150 kg. Procurement teams should plan for one set supplied in two cartons, with packaged gross weight of 23 kg and reference assembly time of 40 minutes per chair. The unbranded specification is useful for projects where bulk layout consistency, adjustable ergonomic features, and a distinctive green mesh finish are priorities. Site planning should account for the 680 mm footprint, rolling clearance around desk bays, and suitability across users who require different seat, arm, headrest, and recline settings.

Green Mesh Ergonomic Executive Office Chair with Headrest Specifications

供应商与现货