Product supplierGreen Mesh Ergonomic Executive Office Chair with Headrest, Green flexible woven mesh over a contoured black outer frame
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 680 × 680 × 1320 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 19 kg | |
|---|---|---|
| Recommended user weight capacity | 150 kg | |
| Suitable user height | 160 to 190 cm | |
| Recommended daily usage | 8 hours | |
| Gas-lift vertical stroke | 80 mm | |
| Back recline angle | 18 degrees | |
| Seat static load verification target | 102 kg | |
| Base static verification target | 1134 kg | |
| Caster rolling durability target | 100000 cycles | |
| Fabric abrasion acceptance target | 50000 Martindale cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Backrest upholstery | Green flexible woven mesh over a contoured black outer frame | |
|---|---|---|
| Headrest upholstery | Green mesh-covered curved headrest with padded core and black lower trim | |
| Seat surface | Black woven fabric or performance mesh over a contoured cushion | |
| Seat cushion | 70 mm molded polyurethane foam, density target 45 kg/m3 | |
| Back cushioning | Zone-molded lumbar and upper-back padding behind mesh support | |
| Seat inner support | 12 mm molded plywood or glass-filled polypropylene load pan | |
| Back frame | Black glass-filled nylon or reinforced polypropylene perimeter frame | |
| Armrest pads | Black soft-touch polyurethane pads on rigid support plates | |
| Arm supports | Black injection-molded resin or steel-reinforced posts with vertical housings | |
| Gas lift | 50 mm chrome-plated steel class-3 gas lift with black telescopic shroud | |
| Five-star base | Black glass-filled nylon base with five curved legs and integral caster sockets | |
| Casters | Five black twin-wheel nylon casters with steel swivel stems |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| 360-degree swivel | Full rotational swivel through the seat-bearing and gas-lift assembly | |
|---|---|---|
| Pneumatic seat-height adjustment | Lever-operated gas lift provides 80 mm travel from 460 to 540 mm seat height | |
| Synchronized recline | Back reclines up to 18 degrees with linked seat movement for posture change | |
| Tilt lock | Multi-position lock secures the chair at upright and selected reclined angles | |
| Tilt tension control | Rear rotary knob adjusts recline resistance for user weight between 50 and 150 kg | |
| Headrest adjustment | Curved headrest supports height and angle adjustment with 60 mm vertical travel | |
| 4-D armrest adjustment | Arm pads support height, width, slide, and 15-degree rotation adjustments | |
| Lumbar zone support | Contoured central back panel provides passive lower-back support without a separate external pillow | |
| Mobile floor movement | Five twin-wheel 60 mm casters provide multi-directional rolling on hard floors and low-pile carpet | |
| Waterfall seat front | Rounded front edge reduces pressure behind the knees during extended seated work | |
| Recline safety margin | Mechanism and gas lift should be selected to retain stability at the full 18-degree recline | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Private executive office | High-back support, headrest, and recline suit long-duration computer and meeting work at 1400 to 1800 mm desks | |
|---|---|---|
| Open-plan workstation | 680 mm footprint and five-caster mobility suit standard 1200 mm desk bays and swivel task use | |
| Home office | Breathable green mesh and padded seat fit daily laptop or desktop work in study rooms | |
| Hot-desking area | Swivel, rolling, height adjustment, and arm adjustment allow quick changes between users | |
| Meeting or video-call room | Upright support and headrest make the chair suitable for discussions and virtual meetings lasting up to 2 hours | |
| IT and design workstation | Recline and lumbar support benefit users performing screen-based design, coding, or documentation work | |
| Procurement configuration recommendation | Order hard-floor or carpet-specific casters and confirm armrest adjustment type before bulk purchase | |
| Recommended desk height | 720 to 760 mm |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-1 suitability | Use dimensions and ergonomic seating geometry for office chairs as a layout and fit reference | |
|---|---|---|
| EN 1335-2 suitability | Require structural safety verification including stability, strength, and caster-related checks | |
| EN 1335-3 suitability | Use test methods for strength, durability, back, arm, seat, and base components | |
| EN 1021-1 and EN 1021-2 suitability | Specify cigarette and match ignition testing for seat and back upholstery where flame retardancy is required | |
| EN 12521 suitability | Useful only if the supplier classifies the chair as durable non-domestic seating with matching evidence |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 suitability | Applicable standards and test results require confirmation | |
|---|---|---|
| ANSI/BIFMA e3 suitability | Use furniture sustainability criteria for material, energy, human-wellness, and social-responsibility scoring when required |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357.3 suitability | Apply seat and back strength and durability requirements for office seating during incoming inspection | |
|---|---|---|
| GB/T 24821 suitability | Use multi-purpose office furniture quality and structural inspection items where applicable | |
| GB 18584 suitability | Require indoor-furniture limited-hazard material verification for emitted and extractable pollutants | |
| GB/T 3324 suitability | Use general wooden furniture dimensional and workmanship checks if a plywood seat shell is supplied | |
| GB/T 26701 suitability | Industrial-film or decorative-coating requirements may be used for painted metal parts if applicable |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357.3 suitability: Apply seat and back strength and durability requirements for office seating during incoming inspection; 2. GB/T 24821 suitability: Use multi-purpose office furniture quality and structural inspection items where applicable; 3. GB 18584 suitability: Require indoor-furniture limited-hazard material verification for emitted and extractable pollutants; 4. GB/T 3324 suitability: Use general wooden furniture dimensional and workmanship checks if a plywood seat shell is supplied; 5. GB/T 26701 suitability: Industrial-film or decorative-coating requirements may be used for painted metal parts if applicable; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool