纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 620 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight	120 kg
Net weight	12.5 kg
Static seat load verification target	660 kg
Backrest cyclic test target	120,000 cycles
Seat-slide impact test target	100,000 cycles
Caster rolling durability target	100,000 cycles
Gas-lift cycles	100,000 height-adjustment cycles
Recommended daily occupancy	8 hours
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Backrest mesh	Grey flexible polymer mesh tensioned within a moulded polymer frame
Back frame	Black or dark-grey injection-moulded polymer outer frame with rounded perimeter
Lumbar panel	Curved padded or mesh-supported lumbar section integrated into the lower backrest
Seat cushion	60 mm polyurethane foam core with 20 mm soft top layer under woven fabric
Seat upholstery	Light-grey woven fabric with edge-tailored cushion seam
Seat support board	12 mm moulded plywood or polymer seat carrier beneath cushion
Armrests	Fixed black polymer T-arm pads mounted on polymer support stems
Gas lift	50 mm chrome-plated steel telescopic cylinder with black outer shroud
Mechanism	Black steel tilt mechanism with visible side lever and tension housing
Five-star base	Black glass-filled nylon five-star base with reinforced leg ribs
Casters	Black nylon twin-wheel swivel casters with hard-floor tread bands
Fasteners and inserts	Steel bolts, washers, and threaded inserts used at arm, back, and mechanism joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seat height adjustment	Pneumatic lever provides 100 mm travel from 430 to 530 mm seat height
Swivel	360-degree swivel around the central gas lift
Back tilt	Synchronous-style recline with a maximum backrest tilt angle of 12 degrees
Tilt lock	One-position upright lock controlled by the visible side lever
Tilt tension	Tension knob adjusts backward resistance for users up to 120 kg
Fixed arm support	Stationary T-arm rests provide forearm support at 220 mm above the seat
Mobility	Five 50 mm twin-wheel casters provide rolling mobility in all directions
Lumbar support	Contoured lower back panel provides passive lumbar contact
Reversible assembly option	Back, arms, mechanism, base, gas lift, and casters install as separate components
Floor use	Hard-floor nylon caster treads suitable for tile, wood, laminate, and protective mats
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Carton dimensions	650 x 600 x 320 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan workstation	Suitable for daily individual workstations where swivel, height adjustment, and mobility are required
Home office	Appropriate for a residential desk or study area with a 610 mm rolling footprint
Hot-desking area	Suitable for shared desks because the 100 mm lift accommodates different users
Meeting or training room	Usable at standard 760 mm desks for short to medium meetings
Reception workstation	Fits service counters or computer desks where staff rotate between seated tasks
Recommended desk pairing	Pair with desks 760 mm high and work surfaces at least 600 mm deep
Not recommended for intensive 24-hour use	Best suited to single-shift seating rather than control-room or all-day multi-shift operations
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OC-MB-MESH-0620-GRY

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OC-MB-MESH-0620-GRY

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OC-MB-MESH-0620-GRY打开导出工具

页面快速操作

发布采购询价

产品描述

The Mid-Back Mesh Swivel Task Chair with Fixed Arms, model OC-MB-MESH-0620-GRY, presents a practical office seating solution with a clean grey and black appearance. Its grey flexible polymer mesh back is tensioned within a rounded black or dark-grey moulded polymer frame, creating a ventilated visual profile suited to everyday work settings. The light-grey woven fabric seat is upholstered with a tailored edge seam and paired with fixed black polymer T-shaped armrests. A five-star black polymer base, chrome-plated steel gas lift, and twin-wheel casters complete the straightforward commercial look. Construction balances cushioned support with durable support components. The seat uses a polyurethane foam core with a softer top layer, giving a finished cushion thickness of 90 mm, while the backrest includes a curved padded or mesh-supported lumbar section integrated into the lower back. Beneath the seat is a moulded plywood or polymer carrier, a black steel tilt mechanism, and a 50 mm chrome-plated telescopic cylinder with a black outer shroud. The arm pads are stationary and mounted on polymer support stems, and the chair rolls on nylon twin-wheel casters. Functionality is focused on typical desk tasks. A pneumatic side lever adjusts seat height through 100 mm of travel, from 430 to 530 mm, and the chair rotates through 360 degrees. The synchronous-style back recline reaches a 12-degree maximum tilt angle, with a one-position upright lock and a tension knob for backward resistance suitable for users up to 120 kg. Fixed armrests provide consistent forearm support, while the five-point base and casters allow movement in all directions. This unbranded task chair fits open-plan workstations, home offices, hot-desking areas, meeting or training rooms, and reception workstations involving rotating seated tasks. It is intended for pairing with 760 mm-high desks and work surfaces at least 600 mm deep, and the residential rolling footprint is noted as 610 mm. Buyers should plan for assembly, with a reference time of 40 minutes per set, and note that the product is supplied as one set across two cartons with a packaged gross weight of 23 kg. Clear width between armrests is 540 mm, making desk clearance and user size important specification checks before procurement.

Mid-Back Mesh Swivel Task Chair with Fixed Arms Specifications

供应商与现货