纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2400 × 450 × 2000 mm
Carcass Panel Thickness	25 mm
Back Panel Thickness	9 mm
Door / Drawer Front Thickness	22 mm
Shelf Thickness	25 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Product net weight	165 kg
Recommended top-surface static load	40 kg
Shelf distributed static load	15 kg per shelf
Drawer load capacity	20 kg per drawer
Total enclosed storage volume	0.78 m3
Recommended users	2 users
Suggested warranty	5 years
Shelf Distributed Load	30 kg/shelf
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Angle / Life	165°; 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer carcass frame	18 mm moisture-resistant wood-based board with matte light lacquered finish and rounded edge
Dark back panels	18 mm charcoal melamine-faced board in segmented panels
Lower doors	18 mm wood-based board with walnut veneer or walnut-look laminate face
Open shelves	30 mm wood-based board with walnut-tone edge-banded surface
Drawer fronts	18 mm board with ivory lacquered or wrapped quilted diamond surface
Drawer box construction	15 mm laminated plywood or MDF drawer boxes with recessed finger pulls
Internal shelving	18 mm removable board shelf behind three hinged doors, with shelf-pin holes
Hardware	Soft-close concealed hinges and side-mounted full-extension drawer runners
Edge treatment	2 mm PVC or matching ABS edge banding on exposed board edges
Base plinth	Matte dark recessed board or metal plinth with leveler access
Edge Band Thickness	2 mm
Primary Connector Specification	Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Drawer storage	Three vertically stacked drawers provide 660 mm of front-face storage with integrated horizontal recessed pulls
Door storage	Three hinged lower doors conceal a 1500 mm-wide cabinet with removable internal shelves
Open display storage	Two staggered shelves provide separate display zones on the left and right backsplash areas
Soft-close operation	Doors and drawers close with damping hardware to reduce impact noise
Leveling adjustment	Concealed adjustable feet provide 15 mm vertical compensation through the recessed plinth
Door swing	Each door opens 110 degrees with a concealed cup hinge and is reversible only where hinge preparation allows
Drawer extension	Each drawer operates on full-extension runners with a 450 mm travel depth
Storage separation	Open shelves suit frequent display items, while doors and drawers conceal documents, clothing or personal belongings
Cable / Vent Opening Reference	If fitted, 80 mm diameter

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 700× 350 mm/carton according to carcass split
Reference Packaged Gross Weight	100 kg/set in 3 cartons
Reference Packaging Volume	0.65 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Master bedroom	Suitable as a wardrobe-side storage wall for folded clothing, accessories and display objects
Hotel suite or serviced apartment	Fits guest-room storage zones requiring concealed luggage items and curated display shelves
Executive office or manager room	Suitable for documents, samples and personal storage behind a desk or reception area
Study or library annex	Useful for books, binders and decorative objects on staggered shelves
High-end residential living area	Can serve as a refined sideboard wall for tableware, media accessories and art objects
Showroom or model home	Appropriate for furnished displays emphasizing contemporary walnut, ivory and charcoal finishes

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.9 办公储物单元

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324 dimensions and structural quality	Applies to dimensional tolerances, workmanship and stability of wooden cabinets
GB/T 4893.4 surface abrasion resistance	Applies to wear resistance of painted or laminated furniture surfaces
GB/T 17657 board performance	Applies to moisture content, screw-holding and bending tests for wood-based panels
GB 18580 formaldehyde emission	Applies to formaldehyde emission control for interior wood-based panels
GB/T 10357.5 cabinet strength and durability	Applies to shelf, drawer and structural load testing

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324 dimensions and structural quality：Applies to dimensional tolerances, workmanship and stability of wooden cabinets；
2. GB/T 4893.4 surface abrasion resistance：Applies to wear resistance of painted or laminated furniture surfaces；
3. GB/T 17657 board performance：Applies to moisture content, screw-holding and bending tests for wood-based panels；
4. GB 18580 formaldehyde emission：Applies to formaldehyde emission control for interior wood-based panels；
5. GB/T 10357.5 cabinet strength and durability：Applies to shelf, drawer and structural load testing；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CSW-2400-3D3O

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CSW-2400-3D3O

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CSW-2400-3D3O打开导出工具

页面快速操作

发布采购询价

产品描述

The Contemporary Combination Storage Wall with Drawers, Doors and Open Shelves is a floor-standing storage system designed for settings that require both concealed organization and curated display. Model CSW-2400D3O presents a contemporary two-tone composition through a matte light outer frame, walnut-tone doors and shelves, charcoal back panels, and ivory quilted drawer fronts. Its asymmetric layout places three lower hinged doors across the main storage section, three vertically stacked drawers on the front elevation, and two staggered open shelves in separate left and right backsplash display zones. The cabinet is built with a wood-based board case and rounded frame edges. Exposed edges are finished with PVC or matching ABS edge banding. The outer carcass frame uses moisture-resistant board with a matte light lacquered surface, while the segmented dark backsplash is formed with charcoal melamine-faced panels. Lower doors are faced with walnut veneer or walnut-look laminate, and the open shelves use walnut-tone edge-banded board. Drawer fronts feature an ivory lacquered or wrapped quilted diamond surface. Drawer boxes are made from laminated plywood or MDF and include recessed finger pulls, supporting a clean front appearance without prominent handles. Practical storage is divided between open and enclosed areas. The hinged lower doors conceal a wide cabinet with removable internal shelves and shelf-pin holes, making the interior adaptable for folded goods, documents, binders, tableware, or personal items. Three stacked drawers provide separate soft-close storage and operate on side-mounted full-extension runners. Doors use concealed soft-close hinges to reduce closing impact, while adjustable feet are concealed within the recessed plinth to compensate for uneven floors. Each door opens 110 degrees, and reversal is possible only where hinge preparation allows. The open shelves offer visible zones for books, decorative pieces, display objects, or curated accessories. Rated loads include 40 kg static load on the top surface, 15 kg distributed load per shelf, and 20 kg per drawer. The enclosed storage volume is 0.78 cubic meters, and the model is recommended for two users.

Contemporary Combination Storage Wall with Drawers, Doors and Open Shelves Specifications

供应商与现货