| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1880 x 2080 x 1020 mm | |
|---|---|---|
| Compatible mattress size | 1800 x 2000 mm | |
| Sleeping surface height (top of slats) | 320 mm | |
| Mattress thickness compatibility | 300 mm | |
| Headboard height from floor | 1020 mm | |
| Footboard height from floor | 360 mm | |
| Underbed clearance height | 180 mm | |
| Bed leg cross-section | 60 x 60 mm | |
| Side rail thickness | 30 mm | |
| Slat count | 28 pieces | |
| Slat spacing | 70 mm | |
| Slat thickness | 20 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total static load capacity | 500 kg | |
|---|---|---|
| Center support beam count | 1 piece | |
| Net frame weight | 55 kg | |
| Finish abrasion resistance | 1000 cycles | |
| Connector static shear rating | 80 kg per connector | |
| Warranty period | 3 years | |
| Available finish options | 4 variants | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard panel | Solid oak/rubberwood panel with rounded edge trim | |
|---|---|---|
| Footboard panel | Matching solid wood panel with rounded edges | |
| Side rails | Solid hardwood rails with eased edges | |
| Support slats | Solid pine wood slats, sanded smooth | |
| Bed legs | Solid hardwood square legs with rounded corners | |
| Center support beam | Solid hardwood longitudinal beam | |
| Surface finish | Clear natural wood wax oil finish | |
| Hardware connectors | Zinc-plated steel bolts and barrel nuts | |
| Floor glides | Non-marking plastic glides at leg bases | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Box spring requirement | No box spring required | |
|---|---|---|
| Assembly method | Knock-down flat-pack assembly with included hardware | |
| Floor protection | Non-marking fixed glides at each leg base | |
| Underbed access | 180 mm open clearance under side rails | |
| Mattress retention | Recessed slat platform with 30 mm rail lip | |
| Structural stabilization | Cross-bolted rail-to-leg joints with center support | |
| Seated back support | 1020 mm tall solid headboard panel | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential master bedroom | Fits king size mattress for primary adult bedroom use in Scandinavian-themed interiors | |
|---|---|---|
| Secondary guest bedroom | Durable solid wood construction suitable for frequent guest accommodation | |
| Small apartment bedroom | Low-profile design and 180mm underbed clearance suits compact living spaces | |
| Short-term rental furnished units | Easy to assemble, durable natural wood finish suitable for Airbnb and rental properties | |
| Matching bedroom sets | Pairs with matching light wood nightstands and dressers for coordinated bedroom layout |
EU Market Access Requirements* EN Standards
| EN 747:2012+A1:2015 | Furniture - Bunk beds and high beds for domestic use, structural safety reference | |
|---|---|---|
| EN 1725:1998 | Domestic furniture - Beds and mattresses - safety requirements and test methods |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural stability inspection | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture | |
| GB/T 10357.6-2013 | Test of mechanical properties of furniture - strength and durability of beds |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural stability inspection; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture; 3. GB/T 10357.6-2013: Test of mechanical properties of furniture - strength and durability of beds; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
