| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 2000 x 1050 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total static bed load capacity | 500 kg | |
|---|---|---|
| Net product weight | 85 kg | |
| Recommended user weight per side | 150 kg | |
| Bed base durability cycle count | 10000 cycles | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Bed frame core | 18mm E1 grade engineered wood | |
|---|---|---|
| Headboard upholstery | 0.8mm thick matte faux leather | |
| Headboard padding | 30mm high-density polyurethane foam | |
| Headboard decorative inlay | 120mm diameter wood composite disc | |
| Bed support legs | Solid beech wood angled legs | |
| Slat base | 12mm poplar plywood slats | |
| Surface finish | NC matte paint coating | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Platform base design | Solid slat support, no box spring required | |
|---|---|---|
| Headboard support function | Padded split-panel headboard, provides back support for upright sitting | |
| Assembly structure | Knock-down hardware connection between rails, headboard and legs | |
| Under-bed access | 150mm floor clearance, supports robot vacuum cleaning and under-bed storage bins | |
| Headboard wall alignment | Flat rear profile, sits flush against standard bedroom walls | |
| Mattress retention | Raised edge lip on side and foot rails, prevents mattress sliding during use | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential master bedroom use | Fits 1800x2000mm king size mattress, designed for two-adult daily use, matches modern neutral decor | |
|---|---|---|
| Contemporary apartment fit-out | Low-profile grey and white finish works with light wood and grey interior palettes for urban homes | |
| Hotel guest room furnishing | Durable painted finish and padded headboard suitable for mid-range boutique hotel guest rooms | |
| Match with coordinating nightstand | Pairs with the 2-drawer matching grey nightstand shown for cohesive bedroom furniture set | |
| Low-ceiling bedroom application | Total height 1050mm does not overwhelm rooms with lower ceiling heights |
EU Market Access Requirements* EN Standards
| EN 747-1:2012+A1:2015 | Furniture - Beds and mattresses - Safety requirements for domestic beds, applicable for structural safety gaps and edges | |
|---|---|---|
| EN 13453-1:2004 | Furniture - Test methods for beds - Determination of strength and durability, recommended for load cycle validation |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for frame strength and finish quality inspection | |
|---|---|---|
| GB 18584-2001 | Limit of formaldehyde emission for wooden furniture, recommended E1 grade ≤0.124mg/m³ for indoor use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for frame strength and finish quality inspection; 2. GB 18584-2001: Limit of formaldehyde emission for wooden furniture, recommended E1 grade ≤0.124mg/m³ for indoor use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
