Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	3200 × 1800 × 880 mm
Overall set dimensions	3200 x 1800 x 880 mm
Matching single armchair dimensions	900 x 850 x 880 mm
Seat height from floor	470 mm
Main sofa seat depth per position	760 mm
Chaise lounge depth	1550 mm
Armrest height from seat	180 mm
Backrest total height from seat	410 mm
Support leg height	120 mm
Armrest width	120 mm
Seat cushion thickness	220 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total seating capacity	5 persons
Total distributed static load capacity	500 kg
Set net weight	142 kg
Cushion foam density	45 kg/m³
Cushion foam rebound rate	60%
Recommended service life	8 years
Seam stitch pitch	8 mm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Inner load-bearing frame	Kiln-dried solid wood + 18mm engineered plywood, corner-blocked joinery
Arm and frame outer upholstery	1.2mm thick matte dark green faux leather, stain-resistant surface
Seat cushion top upholstery	1.0mm thick light gray matte faux leather, anti-scratch finish
Cushion core material	High-density polyurethane foam wrapped in 200g polyester fiber fill
Backrest cushion fill	Dual-layer: high-density foam base + blown polyfiber topper, removable covers
Support legs	20mm diameter matte black powder-coated carbon steel, floor protection glides
Suspension system	80mm sinuous spring support with 50mm elastic webbing layer
Throw pillow covers	Faux leather and printed fabric, polyfiber fill
Stitching thread	High-tenacity polyester thread, matched edge piping on arm and cushion seams
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Chaise configuration	Fixed right-hand facing chaise, non-reversible layout
Cushion design	Removable seat and back cushions with zip-off covers for spot cleaning
Leg assembly	Tool-attached steel legs, bolted to pre-installed frame mounting plates
Lumbar support	Detachable upper backrest cushions for adjustable lower back positioning
Floor protection	Non-marking plastic glides fitted to all leg bases to prevent hard floor scratching
Included accessories	4 matching decorative throw pillows supplied with the complete set
Upholstery performance	Water-repellent faux leather surface that wipes clean with damp cloth
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Largest carton dimensions	2100 x 950 x 650 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential living room primary seating	Sized for medium to large open-plan living spaces with 5person capacity
Apartment lounge use	Compact L-shape fits open plan apartment spaces without blocking walkways
Casual reception lounge spaces	Durable faux leather finish suits low-traffic office reception or breakout areas
Recommended pairing	Matches low-profile marble-top rectangular coffee tables as shown in reference imagery
Target user group	Households seeking modern two-tone styling with low-maintenance upholstery
Recommended floor placement	Position against wall with chaise facing open room to maximize walkway space
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Domestic upholstered furniture safety	EN 1022:2018
Upholstered furniture flammability	EN 1021:2014

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Upholstered furniture safety specification	GB 20400
Furniture mechanical performance for sofas	GB/T 3324

Standardized tender description text

This product must meet the following technical requirements:
1. Upholstered furniture safety specification: GB 20400;
2. Furniture mechanical performance for sofas: GB/T 3324;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · LS-SEC-ARM-3200

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · LS-SEC-ARM-3200

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · LS-SEC-ARM-3200Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Two-Tone L-Shaped Sectional Sofa Set with Matching Armchair (model LS-SEC-ARM-3200) is a modern public and residential seating solution defined by clean, geometric lines and a deliberate two-tone finish that balances visual depth with understated style. Its fixed right-hand facing L-configuration creates a streamlined, structured silhouette, with the extended chaise positioned to define clear seating zones without visual clutter. The set includes the main sectional and a coordinating single armchair, unified by consistent detailing, matched edge piping along arm and cushion seams, and four included decorative throw pillows that tie the design together. When positioned against a wall with the chaise facing open floor space, the layout preserves clear walkways, while paired seating pieces create a cohesive, intentional arrangement that complements low-profile marble-top rectangular coffee tables. Constructed for long-term regular use, the set features a kiln-dried solid wood and 18mm engineered plywood inner frame reinforced with corner-blocked joinery, supported by 20mm diameter matte black powder-coated carbon steel legs fitted with non-marking plastic glides to prevent hard floor scratching. The suspension system combines 80mm sinuous springs with a 50mm elastic webbing layer for consistent support. Upholstery is divided by function: arm and frame exteriors use 1.2mm thick matte dark green stain-resistant faux leather, while seat cushion surfaces use 1.0mm thick light gray matte anti-scratch faux leather with a water-repellent finish that wipes clean with a damp cloth. Seat cushions hold high-density 45 kg/m³ polyurethane foam with 60% rebound rate, wrapped in 200g polyester fiber fill, while backrest cushions use a dual-layer build of high-density foam base and blown polyfiber topper, stitched with high-tenacity polyester thread at 8mm seam pitch. All seat and back cushions have zip-off removable covers for spot cleaning, and detachable upper backrest cushions allow adjustable lumbar support positioning. Legs bolt to pre-installed frame mounting plates, with a 40-minute assembly time per set, delivered across two cartons. The complete set seats five people, with a total distributed static load capacity of 500 kg, 470mm seat height, 410mm backrest height from the seat, 180mm armrest height above the seat, 760mm seat depth per standard position, and 1550mm chaise depth, supported on 120mm tall legs. An 8-year recommended service life and low-maintenance surfaces make the set suited for medium to large open-plan residential living rooms, open-concept apartment lounges, and low-traffic casual office reception or breakout areas. Procurement teams should note the fixed non-reversible chaise orientation to confirm alignment with intended floor plans, account for the 142kg net weight for delivery and placement planning, and verify that site dimensions accommodate the full 3200 x 1800 x 880 mm sectional footprint alongside the 900 x 850 x 880 mm matching armchair. The water-repellent, easy-clean upholstery reduces ongoing upkeep requirements for high-use shared spaces.

Two-Tone L-Shaped Sectional Sofa Set with Matching Armchair Specifications

Suppliers and stock