| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 400 x 450 mm | |
|---|---|---|
| Side drawer internal dimensions | 480 x 330 x 150 mm | |
| Central open cubby internal dimensions | 260 x 360 x 220 mm | |
| Tapered leg height | 120 mm | |
| Top panel thickness | 18 mm | |
| Carcass panel thickness | 15 mm | |
| Back panel thickness | 9 mm | |
| Open shelf thickness | 15 mm | |
| Drawer front panel thickness | 18 mm | |
| Leg diameter at floor contact | 30 mm | |
| Drawer pull diameter | 60 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Top surface static load capacity | 50 kg | |
|---|---|---|
| Product net weight | 38 kg | |
| Recommended maximum TV size | 75 in | |
| Drawer slide cycle rating | 30000 open/close cycles | |
| Moisture content of wood components | 12% | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top surface | Solid pine or rubberwood with clear matte water-based lacquer | |
|---|---|---|
| Body carcass | E1-grade medium density fiberboard with natural oak veneer | |
| Support legs | Solid rubberwood tapered legs, matching natural wood finish | |
| Drawer fronts | Solid wood panels with recessed circular ring pulls | |
| Drawer glides | Cold-rolled steel side-mount glides, optional soft-close damping | |
| Back panel | Hardboard with pre-cut cable management openings | |
| Open shelf surfaces | Veneered engineered wood, edge-banded to prevent chipping | |
| Pull hardware | Zinc alloy circular ring pulls, brushed brass finish | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Drawer operation | Side-mounted steel glides with full extension access for stored items | |
|---|---|---|
| Cable management | Pre-cut 60mm diameter openings at rear of each open cubby | |
| Ventilation design | 10mm gap between open shelf rear and back panel | |
| Surface protection | Rounded edge profiling on all top and panel corners | |
| Stability anchoring | Included anti-tip wall anchor kit for earthquake/tip prevention | |
| Storage configuration | Two enclosed side drawers plus three equal central open cubbies | |
| Leveling adjustment | Small plastic floor glides on each leg base | |
| Cable / Vent Opening Reference | 80 mm diameter; recommend 4rear cable/vent openings |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Living room media placement | Positioned against main wall opposite seating to hold flat-screen TV and AV devices | |
|---|---|---|
| Small to medium apartment use | 1800mm length fits 4 m wide living room walls without overcrowding | |
| Open-concept living space | Low 450mm height preserves sight lines across open plan living areas | |
| Matching set configuration | Pairs with coordinating solid wood coffee table and sofa set for cohesive living room decor | |
| Media equipment organization | Open bays provide easy access to set-top boxes, game consoles and soundbars | |
| Secondary storage use | Drawers store remote controls, media discs, blankets and small living room accessories |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Domestic furniture strength, durability and safety requirements for storage units | |
|---|---|---|
| EN 717-1:2004 | Wood-based panel formaldehyde emission test method, E1 class reference | |
| EN 14749:2016 | Safety and structural requirements for domestic and kitchen storage furniture |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applies to dimensional and structural tolerances | |
|---|---|---|
| GB 18584-2001 | Formaldehyde emission limit for indoor wooden furniture, E1 grade ≤0.124mg/m³ requirement | |
| GB/T 4893.9-2013 | Surface wear resistance test for furniture finishes, applicable to top surface durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applies to dimensional and structural tolerances; 2. GB 18584-2001: Formaldehyde emission limit for indoor wooden furniture, E1 grade ≤0.124mg/m³ requirement; 3. GB/T 4893.9-2013: Surface wear resistance test for furniture finishes, applicable to top surface durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
