Product supplierUpholstered Low-Profile Platform Bed with Matching Nightstand, Camel-tone smooth upholstery over padded panels
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1950 × 2180 × 1050 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Bed frame recommended load | 350 kg | |
|---|---|---|
| Static platform load reference | 500 kg | |
| Nightstand top load | 30 kg | |
| Drawer load per drawer | 15 kg | |
| Nightstand net weight | 32 kg | |
| Recommended occupants | 2 adults | |
| Drawer slide cycle reference | 50000 open-close cycles | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Headboard facing | Camel-tone smooth upholstery over padded panels | |
|---|---|---|
| Headboard core | Timber or engineered-wood frame with foam backing and two vertical padded sections | |
| Side and foot rails | Upholstered engineered-wood panels with concealed corner joining | |
| Bed support legs | Black matte-finish metal tapered legs, four visible corner positions | |
| Mattress support system | 15 mm plywood or 120 mm-spaced bentwood slats over timber rails | |
| Nightstand carcase | Camel-tone painted engineered-wood panels with straight edges | |
| Nightstand drawers | Two wood-based drawers with black centered vertical pull | |
| Drawer slides | Side-mounted full-extension ball-bearing slides, 400 mm nominal length | |
| Internal frame board thickness | 18 mm engineered-wood panels and 30 x 50 mm timber rails | |
| Upholstery foam thickness | 40 mm headboard padding and 20 mm side-rail padding | |
| Leg mounting plate | 2.5 mm black powder-coated steel plate with four bolt fixings per leg | |
| Slat Thickness | 15 mm bent plywood or solid timber |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Sleeping configuration | Fixed king-size platform designed for an 1800 x 2000 mm mattress and two adult users | |
|---|---|---|
| Headboard support | Two-panel padded headboard provides back support and wall protection behind pillows | |
| Platform entry | Low 550 mm sleeping surface with 100 mm open floor clearance for cleaning access | |
| Nightstand storage | Two equal stacked drawers supply concealed storage for personal and bedding items | |
| Drawer operation | Side-mounted slides provide full drawer access with a 350 mm travel target | |
| Bedside access | Nightstand is positioned beside the bed for lamp, phone, book, and charging storage | |
| Floor protection | Hard floor glides or insert feet should be fitted to the four metal legs | |
| Assembly method | Bolted rail-to-headboard corners with legs attached to reinforced corner blocks | |
| Stability requirement | All four corners must rest evenly on the floor without rocking after assembly | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Master bedroom | Suits a residential king-size bedroom where a soft camel headboard creates a warm focal point | |
|---|---|---|
| Hotel guest room | Suitable for boutique hotel rooms requiring a durable upholstered bed with matching bedside storage | |
| Serviced apartment | Appropriate for long-stay apartments because the two-drawer nightstand supplies concealed personal storage | |
| Modern interior setting | Fits contemporary, warm-neutral, or minimalist interiors with camel, cream, black, and wood palettes | |
| Pairing recommendation | Use with cream bedding, orange accent textiles, and black metal lighting to match the displayed styling | |
| Maintenance access | Low open clearance allows robotic or manual vacuum cleaning around the bed perimeter |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool