| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Side Rail Thickness | 40 mm | |
|---|---|---|
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Recommended static sleep load | 300 kg | |
|---|---|---|
| Mattress support point load | 100 kg at any 400 x 400 mm area | |
| Bed frame net weight | 75 kg | |
| Mattress support capacity | 1 mattress, 1530 x 2030 mm maximum | |
| Occupant capacity | 2 adults | |
| Slat spacing requirement | 80 mm clear gap | |
| Center support leg load rating | 100 kg per leg | |
| Fastener cyclic assembly target | 20 assembly/disassembly cycles | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Black woven fabric over padded panel with five vertical channel seams | |
|---|---|---|
| Side and foot rail upholstery | Black fabric over fully padded wood or engineered-wood frame | |
| Decorative inserts | Brown smooth-finish oval and strap-like accents at side corners and foot rail | |
| Internal support frame | Kiln-dried hardwood or LVL structural frame with bolted corner joints | |
| Mattress support system | 15 mm poplar plywood deck or 25 mm bentwood slats with center rail | |
| Center support beam | 40 x 60 mm rectangular wood or steel beam with three floor legs | |
| Padding layers | 25 mm polyurethane foam on headboard and 20 mm foam on side rails | |
| Foam density | 30 kg/m3 polyurethane foam for upholstered rails and headboard | |
| Bottom dust cover | Black non-woven polypropylene fabric tacked under the base | |
| Feet or floor glides | 20 mm black nylon or rubber non-scuff glides flush with upholstered base | |
| Joinery hardware | M8 carbon-steel bolts, barrel nuts, and lock washers at rail and headboard joints | |
| Seam construction | Stitched vertical channel seams with 70 mm seam pitch across the headboard |
Adjustment / rotation / tilt / mobility / storage features
| Sleeping function | Fixed platform sleeping surface for one queen-size mattress up to 250 mm thick | |
|---|---|---|
| Headboard support | Padded vertical headboard provides backrest and pillow retention without recline adjustment | |
| Mattress retention | Raised upholstered side and foot rails contain the mattress and reduce lateral movement | |
| Under-bed storage | No lift mechanism or storage drawers are visible; base functions as a fixed platform | |
| Assembly method | Knockdown headboard, side rails, foot rail, and support slats connect with bolts and cross dowels | |
| Floor adaptation | Low-profile glides allow placement on hard floors or low-pile carpet with 20 mm clearance | |
| Ventilation provision | Slatted support or perforated platform deck maintains bottom-side mattress airflow | |
| Center load transfer | Center beam and three support legs transfer the mattress load across the long span | |
| Bedding clearance | 300 mm rail height retains mattress corners without obstructing sheet changes | |
| No power or adjustment | No motor, actuator, remote, or articulated deck is visible; bed is non-adjustable | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Total gross weight | 85 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary bedroom | Suitable for a 12 to 18 square meter bedroom with queen bedding and two bedside tables | |
|---|---|---|
| Modern residential suite | Black padded frame and brown accents fit contemporary, hotel-inspired, or urban interiors | |
| Hotel or serviced apartment | Suitable for rooms requiring a soft headboard, durable edge protection, and standardized queen bedding | |
| Guest bedroom | Dual-occupancy platform provides a compact styled bed without under-bed drawer hardware | |
| Boutique rental furnishing | Suitable for furnished apartments where a fully upholstered statement bed is delivered in knockdown cartons | |
| Carpeted or hard-floor placement | Low glides suit wood, tile, laminate, and low-pile carpet with 20 mm clearance | |
| Recommended surrounding clearance | 300 mm minimum on each long side and 600 mm at the foot for circulation and bed making |
EU Market Access Requirements* EN Standards
| Structural safety standard | EN 1725:1998 domestic and contract bedding furniture safety requirements | |
|---|---|---|
| Bed durability test standard | EN 1957:2015 test methods for beds and mattresses | |
| Upholstered furniture seating-bed fire guidance | EN 1021:2014 smouldering cigarette ignition resistance | |
| Wood-based panel emission guidance | EN 13986:2004 wood-based panels for construction use |
US and Canada office-furniture standards
| Bedding support reference | BIFMA E2019does not directly cover residential beds; use EN 1725 instead | |
|---|---|---|
| Commercial furniture hardware guidance | BIFMA X2017threaded fastener integrity concepts may inform bolted joint inspection |
Standards applicable to China-market projects
| Bed safety dimensional recommendation | GB/T 3324 general technical requirements for wooden furniture | |
|---|---|---|
| Upholstered furniture flammability guidance | Recommended references: GB 17927 | |
| Formaldehyde emission recommendation | GB 18580formaldehyde emission for wood-based panels | |
| Furniture hardware recommendation | GB/T 3325 metal furniture general technical requirements |
This product must meet the following technical requirements: 1. Bed safety dimensional recommendation: GB/T 3324 general technical requirements for wooden furniture; 2. Upholstered furniture flammability guidance: Recommended references: GB 17927; 3. Formaldehyde emission recommendation: GB 18580formaldehyde emission for wood-based panels; 4. Furniture hardware recommendation: GB/T 3325 metal furniture general technical requirements; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
