Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1830 × 2340 × 1470 mm
Overall footprint	1830 x 2340 x 1470 mm
Mattress support area	1530 x 2030 mm
Headboard height above floor	1120 mm
Headboard thickness	180 mm
Footboard height above floor	356 mm
Footboard thickness	160 mm
Side rail height above floor	350 mm
Side rail thickness	120 mm
Under-bed clearance	100 mm
Recommended mattress thickness	305 mm
Sleeping surface height	420 mm
Slat width	70 mm
Slat thickness	25 mm
Slat spacing	80 mm
Center support legs	3 units
Footprint clearance around bed	500 mm minimum side clearance and 700 mm foot clearance

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended static load capacity	363 kg
Distributed occupant load	227 kg
Slat system static point load	60 kg per slat
Center beam point load	120 kg
Recommended net weight	53 kg
Mattress size capacity	Queen 1530 x 2030 mm
Occupant capacity	2 adults
Expected daily use cycles	10,000 mattress loading cycles
Frame lateral racking resistance target	200 N horizontal force without fastener loosening
Assembly time	50 minutes

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Outer upholstery	Beige woven polyester-family fabric with visible vertical sewn panels
Headboard padding	High-resilience polyurethane foam pad over a structural panel
Footboard padding	Continuous foam-cushioned upholstery with stitched vertical face seams
Side rail upholstery	Fabric-wrapped padded rails with rounded top and corner treatment
Internal frame substrate	Plywood, solid hardwood and engineered-wood hybrid structure
Slat support system	Wood slats on side rails with a central support beam
Support feet	Dark rectangular low-profile feet, likely wood or composite with protective pads
Fasteners	Threaded bed bolts, cam locks, brackets and wood screws with corner blocks
Internal back board	25 mm structural wood-composite panel behind headboard padding
Rail board core	25 mm engineered-wood or plywood side-rail core
Seam construction	Sewn fabric panel seams with 8 stitches per 25 mm target
Fabric surface protection	Unspecified fabric treatment, with no visible leather or vinyl surface

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Platform support	Slatted deck supports the mattress directly and eliminates a box spring
Headboard function	Continuous padded headboard provides pillow backstop and soft wall protection
Footboard function	Rounded padded footboard retains bedding and reduces impact injury at the bed end
Side retention	Upholstered side rails contain the mattress and conceal the support structure
Center support	Three legs along a central beam distribute queen-size loads across the floor
Knock-down assembly	Headboard, footboard, side rails, slats and feet assemble with supplied hardware
Floor protection	Small raised feet lift the fabric rail from the floor and accept glide pads
Mattress compatibility	Foam, latex or hybrid mattresses up to 305 mm thick fit the platform support
Bedding retention	Padded footboard and side rails reduce blanket and duvet slippage
Cleaning access	100 mm under-bed clearance permits targeted vacuum cleaning but not large storage bins
No storage function	No lift-up mechanism, drawers or hydraulic hinges are visible
No adjustment function	Fixed headboard angle and fixed sleeping height with no recline mechanism

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Total carton volume	2.73 CBM
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2300× 900× 450 mm/carton in 4 cartons
Reference Packaged Gross Weight	130 kg/set
Reference Packaging Volume	0.9 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Primary bedroom	Suitable for a queen-bed room where a soft beige statement headboard and low frame are desired
Modern minimalist interior	Fits neutral cream, warm gray or wood-tone rooms with ribbed wall panels and soft textiles
Hotel guest room	Suitable for upscale boutique hotel rooms using durable woven fabric and a padded footboard
Apartment furnishing	Suits furnished apartments requiring mattress-only platform setup without a box spring
Secondary bedroom	Can serve guest or adult bedrooms with two-person sleeping capacity
Bedroom pair configuration	Pairs with rounded low nightstands at both sides while preserving bedside circulation
Soft-safe family room	Padded edges are appropriate where reduced sharp-corner impact is a design priority

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1725:1998 applicability	Domestic bedding safety, strength and durability requirements for bed frames
EN 12521:2015 applicability	Functional safety and durability requirements for domestic bedroom furniture
EN 1021-1:2014 applicability	Upholstered furniture ignited cigarette smouldering assessment if fabric fire performance is specified

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2024 applicability	General technical requirements for wooden furniture, applicable to the wood bed frame and slat system
GB/T 3325-2017 applicability	Metal furniture general technical requirements, applicable if steel brackets or center rails are used
GB 18584-2001 applicability	Indoor wooden furniture limit for formaldehyde emission, relevant to engineered-wood components
GB/T 10357.6-2013 applicability	Furniture test for bed strength and durability, suitable for static and cyclic load acceptance

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2024 applicability: General technical requirements for wooden furniture, applicable to the wood bed frame and slat system;
2. GB/T 3325-2017 applicability: Metal furniture general technical requirements, applicable if steel brackets or center rails are used;
3. GB 18584-2001 applicability: Indoor wooden furniture limit for formaldehyde emission, relevant to engineered-wood components;
4. GB/T 10357.6-2013 applicability: Furniture test for bed strength and durability, suitable for static and cyclic load acceptance;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · UPB-Q-BEIGE-PADDED-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · UPB-Q-BEIGE-PADDED-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · UPB-Q-BEIGE-PADDED-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Beige Upholstered Low-Profile Platform Bed presents a clean, contemporary sleeping solution defined by soft neutral upholstery, a padded headboard and footboard, and a low platform silhouette. Its beige woven polyester-family fabric is tailored with visible vertical sewn panels, giving the broad headboard a structured, paneled appearance. Matching padded side rails use rounded top edges and softened corner treatment, while dark rectangular low-profile feet provide visual contrast and lift the upholstered frame slightly above the floor. The overall form is calm and residential in feel, with a tall padded headboard balanced by the lower footboard and rails. Construction combines a plywood, solid hardwood, and engineered-wood hybrid frame with a structural wood-composite back panel behind the headboard padding. High-resilience polyurethane foam sits beneath the upholstered headboard surface, and continuous foam cushioning is used on the footboard. The mattress rests directly on wood slats set into the side rails, reinforced by a central support beam with three legs. Threaded bed bolts, cam locks, brackets, wood screws, and corner blocks secure the knockdown components, which include the headboard, footboard, rails, slats, and feet. The feet include protective pads and are designed to accept glide pads, helping keep the fabric rail clear of the floor. Functionally, the slatted platform removes the need for a box spring and supports a queen mattress measuring 1530 by 2030 millimeters. The padded headboard acts as a pillow backstop and soft wall protector, while the footboard helps retain bedding and reduces impact at the end of the bed. Upholstered side rails contain the mattress and conceal the support structure. The bed is rated for two adults, with a recommended static load capacity of 363 kilograms, a distributed occupant load of 227 kilograms, a 60-kilogram static point load per slat, and a 120-kilogram center beam point load. The design suits primary bedrooms, adult guest rooms, and secondary bedrooms seeking a modern minimalist look, particularly in neutral cream, warm gray, or wood-tone interiors. It is also appropriate for upscale boutique hotel guest rooms and furnished apartments where a mattress-only platform setup is preferred. Its low profile pairs naturally with rounded low nightstands while maintaining bedside circulation. Procurement teams should note the unbranded model UPB-Q-BEIGE-PADDED-01, 53-kilogram recommended net weight, two-carton set configuration, 130-kilogram packaged gross weight, and 40-minute assembly time per set. Receiving plans should account for large carton dimensions and verify packaging details at delivery, as logistics records present differing carton-count and dimensional references.

Beige Upholstered Low-Profile Platform Bed with Padded Headboard and Footboard Specifications

Suppliers and stock