| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall bed footprint | 1890 x 2230 x 1150 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Recommended total static load | 350 kg | |
|---|---|---|
| Per-person load rating | 120 kg | |
| Per-drawer distributed load | 15 kg | |
| Drawer slide cycle rating | 50000 cycles | |
| Mattress platform distributed load | 250 kg | |
| Product net weight | 118 kg | |
| Maximum mattress thickness | 300 mm | |
| Drawer count and storage capacity | 3 drawers, 193 L total | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard facing | Taupe upholstery with visible stitched horizontal separation | |
|---|---|---|
| Headboard padding | High-resilience polyurethane foam over a hard back panel | |
| Headboard substrate | 18 mm engineered-wood structural panel | |
| Bed-base upholstery | Taupe padded or wrapped exterior on side and foot rails | |
| Drawer fronts | Taupe painted or laminate wood-composite panel with flush metal label-pull hardware | |
| Drawer interiors | Light natural wood-veneer or wood-grain engineered board | |
| Platform support | 18 mm engineered-wood board or slatted deck on internal support rails | |
| Drawer slides | Side-mounted metal telescopic slides | |
| Drawer pull hardware | Rectangular recessed metal pulls with silver finish | |
| Frame support blocks | Dark low-profile support feet or protective floor glides | |
| Internal frame reinforcement | Solid-wood or engineered-wood battens at corners and center rail | |
| Stitching detail | Fine seam dividing upper and lower headboard cushion zones |
Adjustment / rotation / tilt / mobility / storage features
| Three-drawer under-bed storage | Three side-access drawers pull independently from one long side for linens and seasonal clothing. | |
|---|---|---|
| Full-pull drawer operation | Each drawer extends 720 mm, giving access to the rear 760 mm storage area without lifting the mattress. | |
| Soft-close slide upgrade target | Specify side-mounted slides with damping closure and 15 kg per-drawer load for quiet residential use. | |
| Fixed platform sleeping surface | Non-lifting platform supports a standard mattress directly and leaves drawer space unobstructed. | |
| Padded headboard support | Two-zone upholstered headboard provides seated back support and a soft protective wall buffer. | |
| Flush integrated drawer styling | Drawer fronts align with the bed base and use recessed pulls to preserve the low-profile exterior. | |
| Single-side access layout | Storage is designed for placement with the drawer side clear and the headboard against a wall. | |
| Stable floor-standing installation | Low feet or glides support the perimeter frame; wall-restrained placement is recommended for the tall headboard. | |
| Bedding retention | Upholstered side rails enclose the mattress edge and reduce lateral movement on the platform. | |
| Assembly method | Bolt-together headboard, side rails, foot rail, platform, and drawer modules using cam or connector hardware. | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Master bedroom | Suited to an 1800 mm-wide king mattress with integrated linen storage for residential rooms. | |
|---|---|---|
| Compact residential suite | Three drawers replace a separate dresser when floor space beside the bed is limited. | |
| Hotel or serviced-apartment bedroom | Neutral taupe upholstery and concealed storage fit long-stay room layouts. | |
| Showroom bedroom display | Display model confirms low-profile storage, padded headboard, and flush drawer aesthetics. | |
| Modern interior setting | Pairs with dark wood paneling, neutral bedding, and matte case goods in contemporary schemes. | |
| Access requirement | Place the drawer side with at least 800 mm clearance for full extension and user standing space. | |
| User profile | Designed for two adults seeking hidden storage without a hydraulic lift-up mattress mechanism. |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
