Product supplierBeige Upholstered Low-Profile Platform Bed with Two Pillow Headboard Panels, Beige woven fabric or leather-look textile over padded panels
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1634 × 2305 × 755 mm | |
|---|---|---|
| Compatible mattress size | 1524 x 2032 mm, standard queen | |
| Headboard cushion panel size | 760 x 140 x 620 mm each, two panels | |
| Platform support width | 1580 mm inside the upholstered rail | |
| Platform support length | 2130 mm inside the rail | |
| Side rail thickness | 100 mm vertical by 70 mm horizontal | |
| Foot rail height | 220 mm above floor | |
| Slat dimensions | 1540 x 70 x 18 mm, engineered wood slats | |
| Slat spacing | 75 mm clear gap between adjacent slats | |
| Metal leg dimensions | 30 mm diameter and 180 mm exposed height | |
| Under-bed clearance | 130 mm to underside of rail | |
| Sleeping surface height | 430 mm with a 254 mm mattress | |
| Recommended mattress thickness | 254 mm | |
| Center Support Leg Count | Recommended 6legs |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight | 41.5 kg | |
|---|---|---|
| Total static load capacity | 300 kg | |
| Mattress weight allowance | 60 kg | |
| Occupant capacity | 2 adults | |
| Slat count | 14 slats | |
| Center support legs | 2 center legs plus 4 corner legs | |
| Single-slat static load | 45 kg distributed point load | |
| Upholstery seam slippage acceptance | 6 mm maximum under seam-strength acceptance testing | |
| Foam compression set acceptance | 4 percent maximum after 40 percent compression aging | |
| Bed Static Load Reference | 400 kg |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Beige woven fabric or leather-look textile over padded panels | |
|---|---|---|
| Headboard cushion filling | 45 kg/m3 polyurethane foam with fiber wrapping | |
| Headboard structural board | 18 mm engineered wood backing board behind each cushion | |
| Platform side rails | Plywood or MDF rail assembly upholstered in matching beige material | |
| Support slats | 18 mm bent plywood or laminated engineered wood slats | |
| Support legs | 30 mm powder-coated steel cylindrical legs with floor glides | |
| Fasteners | M8 black-oxide steel bed connector bolts and barrel nuts | |
| Rail corner blocks | 25 mm hardwood or plywood reinforcement blocks at each rail joint | |
| Slat holders | Molded PP or nylon end cups attached to side rails | |
| Base finish | Matte beige upholstery with satin silver-gray metal legs | |
| Floor contact | Non-marking polyethylene glides on each leg | |
| Slat Thickness | 15 mm bent plywood or solid timber |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Mattress support | Direct-on-slat platform support eliminates a box spring | |
|---|---|---|
| Headboard cushion use | Two separate soft panels provide upright back support for reading or sitting in bed | |
| Cushion removal | Removable panels attach to the headboard by hook-and-loop strips | |
| Platform edge retention | Low upholstered side and foot rails contain the mattress while keeping an open modern profile | |
| Floor support | Four corner legs and two hidden center supports distribute static and dynamic loads | |
| Under-bed access | 130 mm clearance permits flat cleaning tools and low-profile under-bed storage | |
| Knock-down assembly | Headboard, side rails, foot rail, slats, and legs ship separated and join with hardware | |
| Static bed configuration | No motorized recline, lift, storage hinge, or adjustable-base mechanism is present | |
| Floor protection | Replaceable polymer glides reduce scratching and allow minor leveling adjustment | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Total gross weight | 47.0 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary bedroom | Suits a modern queen-bed room where a low frame and soft padded headboard are required | |
|---|---|---|
| Minimalist interior | Neutral beige frame and thin metal legs fit light-toned contemporary or Scandinavian interiors | |
| Hotel guest room | Suitable for boutique hotel rooms needing platform support without box springs | |
| Apartment furnishing | Low packaging complexity and knock-down construction suit serviced apartments and rental fit-outs | |
| Reading in bed | Two soft back panels provide shoulder and upper-back support when sitting upright | |
| Low-profile bedding design | Pairs with mattresses up to 254 mm thick while retaining a low external bed appearance |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Household bed safety | EN 1725:1998 safety, strength, and durability requirements for beds | |
|---|---|---|
| Formaldehyde panels | EN 13986:2004 wood-based panels for building use, E1 formaldehyde class | |
| Furniture stability | EN 12521:2015 strength, durability, and safety for domestic seating-related furniture structures |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Wood-based panel emission | GB/T 39600E1 limit for formaldehyde emission from platform boards | |
|---|---|---|
| Furniture mechanical safety | GB/T 3324 general technical requirements for wooden furniture | |
| Upholstered furniture safety | GB 17927durability and safety requirements for upholstered furniture | |
| Furniture hardware tests | GB/T 10357.6strength and durability test for single beds |
Standardized tender description text
This product must meet the following technical requirements: 1. Wood-based panel emission: GB/T 39600E1 limit for formaldehyde emission from platform boards; 2. Furniture mechanical safety: GB/T 3324 general technical requirements for wooden furniture; 3. Upholstered furniture safety: GB 17927durability and safety requirements for upholstered furniture; 4. Furniture hardware tests: GB/T 10357.6strength and durability test for single beds; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool