| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Side Rail Thickness | 40 mm | |
|---|---|---|
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Recommended static bed load | 350 kg | |
|---|---|---|
| Mattress and bedding weight capacity | 80 kg | |
| Occupant capacity | 2 adults | |
| Slat system support | 24 slats | |
| Single-slat distributed load | 35 kg | |
| Frame net weight | 78 kg | |
| Center support legs | 3 legs | |
| Headboard lateral push resistance | 90 kg static side load | |
| Durability acceptance target | 10000 simulated loading cycles | |
| Bed Static Load Reference | 400 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Olive-green soft upholstery with stitched vertical face split | |
|---|---|---|
| Side and foot rail upholstery | Matching olive-green upholstery over rounded padded rails | |
| Internal support frame | Engineered-wood or solid-wood frame, target 25 mm structural members | |
| Slat support system | Timber or birch-composite slats, target 53 mm width and 8 mm minimum thickness | |
| Center support beam | Rectangular timber or steel rail, target 60 x 40 mm section | |
| Support legs | Dark or covered rigid legs, target 50 mm foot diameter | |
| Padding | High-resilience polyurethane foam, target headboard thickness 60 mm and rail thickness 30 mm | |
| Stitching | Tone-on-tone upholstery seam with target 8 stitches per 100 mm | |
| Deck support fabric | Black or neutral woven polyester deck fabric under slats | |
| Foot glides | Non-marking polymer glides, target 2 mm wear layer | |
| Frame corners | Rounded upholstered external corners with internal hardwood blocking | |
| Headboard core | Padded composite board backing, target 12 mm board thickness |
Adjustment / rotation / tilt / mobility / storage features
| Sleeping configuration | Fixed king-size platform designed for one 1800 x 2000 mm mattress | |
|---|---|---|
| Mattress retention | Continuous raised upholstered rails create a 120 mm recess around the mattress | |
| Headboard support | Floor-standing padded panel provides pillow retention and seated-back support | |
| Bed access | Low 480 mm sleeping surface permits side access from both exposed edges | |
| Ventilation support | Slatted platform allows air circulation beneath the mattress | |
| Assembly method | Bolt-on headboard, side rails, foot rail and three cross-support sections | |
| Floor protection | Separate polymer glides under rails and center supports prevent hard-edge contact | |
| Storage limitation | 60 mm ground clearance does not provide usable under-bed storage | |
| Bed orientation | Headboard intended to sit flat against a finished wall | |
| Stability system | Three center legs and corner blocks distribute load into the floor | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary bedroom | Suits a modern residential bedroom where a wide soft headboard serves as the focal element. | |
|---|---|---|
| King-size sleeping zone | Designed for two adults and an 1800 x 2000 mm mattress in open or wall-bed layouts. | |
| Hotel or serviced apartment | Fits upscale guest rooms requiring a soft, low-profile upholstered bed without integrated case goods. | |
| Neutral contemporary interior | Olive-green finish pairs with wood-look flooring, plaster walls and neutral bedding. | |
| Space planning | Requires a 3100 x 3300 mm minimum room zone to retain 400 mm circulation on both sides and foot area. | |
| Pairing recommendation | Coordinates with 550 mm diameter round nightstands shown beside the bed. | |
| Floor compatibility | Low glides are suitable for tile, engineered wood and low-pile carpet with protective flooring. | |
| Not recommended | Unsuitable for rooms requiring large under-bed storage because the platform has only 60 mm ground clearance. |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Safety, strength and durability requirements for domestic beds, suitable as frame acceptance reference. | |
|---|---|---|
| EN 1021-1:2014 | Ignitability by smouldering cigarette for upholstered furniture, recommended as fire-safety acceptance criterion. | |
| EN 717-1:2004 | Formaldehyde release from wood-based panels, applicable to engineered-wood internal substrates. |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to the hidden frame, dimensions and stability tests. | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture general technical requirements, applicable if steel center beams or leg plates are used. | |
| GB 18584-2001 | Indoor decorative and furnishing material limitation of formaldehyde for wood-based furniture substrates. | |
| GB/T 10357.6-2013 | Test method for furniture strength and durability, applicable to bed static load and fatigue acceptance. |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to the hidden frame, dimensions and stability tests.; 2. GB/T 3325-2017: Metal furniture general technical requirements, applicable if steel center beams or leg plates are used.; 3. GB 18584-2001: Indoor decorative and furnishing material limitation of formaldehyde for wood-based furniture substrates.; 4. GB/T 10357.6-2013: Test method for furniture strength and durability, applicable to bed static load and fatigue acceptance.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
