| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Side Rail Thickness | 40 mm | |
|---|---|---|
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Recommended maximum user weight | 180 kg per sleeper | |
|---|---|---|
| Total distributed static load | 360 kg | |
| Mattress support load | 120 kg | |
| Recommended mattress thickness | 300 mm | |
| Suggested minimum slat spacing | 80 mm | |
| Support system quantity | 12 support legs or cross-support points | |
| Frame service target | 10 years | |
| Color count | 1 cream upholstery color | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Cream velvet-look woven fabric over padded panels | |
|---|---|---|
| Headboard internal panel | Engineered wood backing with 40 mm foam padding | |
| Channel tufting | Vertical padded channels with fabric-locked recessed seams | |
| Side rail upholstery | Cream fabric-upholstered panels over a structural wood or engineered-wood rail | |
| Footboard upholstery | Rounded cream upholstered panel with soft rolled outer edge | |
| Platform support base | Wood or engineered-wood bed frame with concealed legs and center reinforcement | |
| Slat system | Bentwood slats or solid board support platform with center rail | |
| Corner hardware | Metal corner brackets and bed-connecting bolts, 8 mm target diameter | |
| Foot finish | Concealed non-marking plastic or low metal glides | |
| Fabric surface treatment | Unconfirmed stain-resistant treatment; no protective label is visible | |
| Seam construction | Sewn vertical channels with consistent upholstery seams, 80 mm seam pitch target | |
| Decorative package | Pillows, bedding, throw blanket, rug, artwork, and floor lamp are styling accessories |
Adjustment / rotation / tilt / mobility / storage features
| Platform sleeping support | Low-profile platform holds the mattress inside upholstered rails with a 60 mm retainer lip | |
|---|---|---|
| Headboard comfort function | Padded wing headboard provides seated back support and side visual enclosure | |
| Mattress retention | Four-sided upholstered rail contains the mattress and reduces lateral shifting | |
| Bed entry design | 360 mm rail and 460 mm sleeping-surface height support low step-in access | |
| Under-bed cleaning access | 40 mm floor clearance allows light surface cleaning but not storage use | |
| Assembly method | Bolted rail, headboard, footboard, and slat package assembly with 12 target fasteners | |
| Orientation | Designed for headboard placement against a flat wall with clear access on both sides | |
| Storage function | No lift-up storage mechanism or drawers are visible on the displayed side and foot | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Packaging carton count | 3 cartons | |
|---|---|---|
| Total packaged gross weight | 118 kg | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary bedroom | Suited to a king-size main bedroom where the cream padded headboard creates a soft focal point | |
|---|---|---|
| Residential suite or apartment | Suitable for furnished apartments seeking a hotel-like bed without exposed metal or wooden legs | |
| Transitional and contemporary interiors | Works with warm neutrals, timber flooring, soft textiles, rugs, and minimal lighting | |
| Seated reading in bed | Padded channel headboard and wing sides support upright reading with separate sleeping pillows | |
| Low-profile room layout | Appropriate where a compact 40 mm under-bed clearance and clean floor line are preferred | |
| Not recommended for under-bed storage planning | Buyers needing drawers, hydraulic lift storage, or high clearance should select a storage-bed model |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
