| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Side Rail Thickness | 40 mm | |
|---|---|---|
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Recommended static bed load | 350 kg | |
|---|---|---|
| Mattress support capacity | 80 kg | |
| Recommended occupant capacity | 2 adults | |
| Platform slat spacing | 70 mm | |
| Net weight reference | 95 kg | |
| Packaged gross weight reference | 115 kg | |
| Fabric seam pull target | 300 N | |
| Frame cyclic load target | 10000 cycles | |
| Pillow display capacity | 4 pillows | |
| Bed Static Load Reference | 400 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Charcoal woven textile with a raised interlaced surface over the headboard, side rails and foot rail | |
|---|---|---|
| Headboard padding | High-loft soft padding under woven fabric with rounded perimeter roll | |
| Bed surround padding | Padded panels on the foot and side rails, producing a soft rounded outer edge | |
| Internal support frame | Engineered timber or plywood load-bearing frame with corner blocking | |
| Mattress support system | Flat slatted timber or composite platform inside the upholstered frame | |
| Base construction | Recessed dark plinth or concealed support rail beneath the upholstered surround | |
| Edge treatment | Fabric-wrapped rounded corners and continuous border without exposed hard trim | |
| Upholstery attachment | Tacked or stapled fabric over padded panels with concealed fixings | |
| Hardware | Concealed cam bolts, brackets and joinery plates for headboard and rail assembly | |
| Mattress retention | Raised upholstered perimeter around the mattress platform | |
| Fabric finish | Matte charcoal-black woven surface with tonal variation | |
| Internal filling reference | 25 mm polyurethane padding over rigid panels in the surround and 40 mm padding in the headboard |
Adjustment / rotation / tilt / mobility / storage features
| Sleeping configuration | Provides a fixed king-size sleeping platform for a 1800 x 2000 mm mattress | |
|---|---|---|
| Headboard function | Full-height padded panel supports seated reading and pillows while forming a complete visual backstop | |
| Mattress location | Recessed platform holds the mattress inside the padded side and foot surround | |
| Bed access | Three-side access is supported by the open side layout, with a fixed upholstered foot rail | |
| Under-bed function | 20 mm shadow clearance allows floor cleaning access but not practical storage use | |
| Assembly method | Knock-down headboard, side rails, foot rail and slat platform connect with concealed fittings | |
| Surface maintenance | Woven removable-dust upholstery requires vacuuming and spot cleaning; fabric removability is not visible | |
| Stability design | Wide floor-contacting perimeter platform distributes load and eliminates the need for protruding legs | |
| Storage provision | No lift mechanism, drawer fronts or external handles are visible, so fixed non-storage construction is specified | |
| Bedding retention | Padded 150 mm side and foot borders help retain duvets and define the mattress zone | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Headboard carton dimensions | 2150 x 250 x 1300 mm | |
|---|---|---|
| Rail carton dimensions | 2200 x 420 x 220 mm | |
| Hardware and slat carton dimensions | 2050 x 320 x 120 mm | |
| Packaged gross weight | 115 kg | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary bedroom | Suits a spacious modern main bedroom where the charcoal woven bed is the visual focal point | |
|---|---|---|
| Boutique hotel suite | Fits luxury or design-led hotel rooms requiring a soft, tactile bed with durable perimeter protection | |
| Residential master suite | Pairs with light stone floors, sheer glazing and minimal side tables as shown in the room setting | |
| Urban penthouse | Appropriate for high-end apartments seeking a low-profile bed with a tall padded backrest | |
| Two-adult use | Designed for a 1800 mm king mattress and simultaneous use by two adults | |
| Interior design showhome | Suitable for styled photography or display suites because the textured charcoal fabric adds depth without patterns | |
| Low-clearance bedroom | Works where under-bed storage is not required and a nearly floor-level silhouette is preferred |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Applies to safety, strength and durability requirements for domestic beds | |
|---|---|---|
| EN 1022:2018 | Applies to stability determination for seating but may inform headboard/back-support assessment only where relevant | |
| EN 71-3:2019+A1:2021 | Applies to migration of certain elements if child-use fabric or coating claims are made |
Standards applicable to China-market projects
| GB/T 3324-2024 | Applies to general technical requirements for wooden furniture used in the upholstered bed frame | |
|---|---|---|
| GB/T 3325-2017 | Applies to metal furniture hardware and strength requirements if metal connectors are used | |
| GB 18580-2017 | Applicable standards and test results require confirmation |
This product must meet the following technical requirements: 1. GB/T 3324-2024: Applies to general technical requirements for wooden furniture used in the upholstered bed frame; 2. GB/T 3325-2017: Applies to metal furniture hardware and strength requirements if metal connectors are used; 3. GB 18580-2017: Applicable standards and test results require confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
