| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Side Rail Thickness | 40 mm | |
|---|---|---|
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Recommended static bed-frame load | 350 kg | |
|---|---|---|
| Recommended distributed mattress load | 300 kg | |
| Weight reference | 65 kg | |
| Occupant capacity | 2 adults | |
| Slat support spacing | 70 mm | |
| Floor contact points | 6 legs | |
| Mattress edge retention | 50 mm side rail height | |
| Assembly cycle rating | 50 assembly/disassembly cycles | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Woven light-grey fabric over foam-padded engineered-wood panel | |
|---|---|---|
| Headboard foam | 25 mm polyurethane padding with sewn vertical channels | |
| Side and foot rails | Grey fabric-upholstered engineered-wood frame with straight profile | |
| Internal support board | 18 mm engineered-wood slats or board platform with 70 mm support spacing | |
| Bed legs | Matte black powder-coated carbon-steel tapered legs | |
| Hardware | Zinc-plated steel bolts, corner brackets and wood dowels with knock-down fittings | |
| Mattress | White quilted mattress with woven ticking and bordered edge | |
| Fabric seam detail | Stitched vertical seams at 110 mm spacing with 8 stitches per 100 mm target | |
| Floor protection | Injection-molded polymer foot caps on each steel leg | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Headboard support | Fixed padded headboard provides seated back support and a continuous 1830 mm visual backing | |
|---|---|---|
| Mattress support | Platform structure supports a 1800 x 2000 mm mattress without requiring a box spring | |
| Storage access | 120 mm under-bed clearance allows robotic vacuum access but no dedicated under-bed drawers | |
| Assembly method | Knock-down headboard, side rails, foot rail, support members and legs bolt together with six floor contacts | |
| Stability design | Angled splayed metal legs spread load outward and resist lateral movement on carpet or hard flooring | |
| Mattress retention | Upholstered side and end rails form a shallow recess to limit sliding of the 1800 mm mattress | |
| Maintenance access | Sewn fabric cover appears fixed rather than removable, requiring vacuum cleaning and spot treatment | |
| Bed placement | Headboard is designed for placement against a flat wall with 50 mm recommended wall clearance | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Gross weight per shipment | 75 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary bedroom | Suits a 1800 x 2000 mm queen mattress for two adults in residential master bedrooms | |
|---|---|---|
| Modern apartment bedroom | Low grey upholstered form and slim black legs suit compact contemporary interiors | |
| Hotel or serviced apartment | Can be specified for quiet-tone guest rooms with matching two-drawer bedside storage | |
| Bedroom display showroom | Channel headboard gives a clear focal point for lifestyle vignettes and mattress cross-selling | |
| Hard-floor or carpeted room | Polymer foot caps and six support points are suited to wood, tile or carpet installations | |
| Residential renovation package | Pairs with neutral bedding and separate bedside cabinets for coordinated procurement |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Applies safety, strength and durability requirements for domestic beds | |
|---|---|---|
| EN 1129-1:1995 | Applies dimensional tolerances and test methods for domestic beds where mattress fit is evaluated | |
| EN 717-1:2004 | Applies formaldehyde release testing for wood-based panels |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applies general technical requirements to wooden furniture dimensions, workmanship and structural stability | |
|---|---|---|
| GB/T 10357.6-2013 | Applies single-bed static-load test procedures for strength and stability verification | |
| GB 18584-2001 | Applies indoor wooden-furniture limits for formaldehyde emission from engineered-wood components | |
| GB/T 17657-2013 | Applies physical and chemical tests for wood-based panels used in the hidden frame |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applies general technical requirements to wooden furniture dimensions, workmanship and structural stability; 2. GB/T 10357.6-2013: Applies single-bed static-load test procedures for strength and stability verification; 3. GB 18584-2001: Applies indoor wooden-furniture limits for formaldehyde emission from engineered-wood components; 4. GB/T 17657-2013: Applies physical and chemical tests for wood-based panels used in the hidden frame; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
