Product supplierL-Shaped Executive Desk with Storage Pedestal and Cable Management, 25 mm E1-grade wood-composite panel with 25 mm applied edge profile
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2400 × 1800 × 750 mm | |
|---|---|---|
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight | 145 kg | |
|---|---|---|
| Distributed desktop load | 80 kg | |
| Single-point desktop load | 30 kg | |
| Pedestal static storage load | 45 kg | |
| Recommended users | 1 person | |
| Recommended desktop point load duration | 8 hours | |
| Edge impact resistance | 20 N impact load | |
| Warranty period | 5 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Worktop substrate | 25 mm E1-grade wood-composite panel with 25 mm applied edge profile | |
|---|---|---|
| Work surface finish | Warm woodgrain melamine or laminate sheet with abrasion-resistant surface | |
| Edge banding | 2 mm PVC or ABS edge banding matched to the top finish | |
| Storage cabinet body | 18 mm painted MDF or particleboard panels in off-white | |
| Drawer fronts | Soft-edge painted composite panels with integrated recessed pulls | |
| Central modesty panel | 1.5 mm powder-coated steel panel in dark gray | |
| End support panel | Composite panel upholstered with brown leather-look fabric or polyurethane | |
| Support base trim | Brushed metallic or silver-painted steel trim at floor contact | |
| Cable grommet | 80 mm plastic or zinc-alloy round grommet with brush insert | |
| Drawer slides | 45 mm full-extension ball-bearing side-mount slides | |
| Fasteners and brackets | Zinc-plated steel cam locks, corner brackets, and joint connectors | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| L-shaped work layout | Primary 2400 mm task surface joins a 1200 mm return for computing, writing, and temporary document staging. | |
|---|---|---|
| Pedestal storage | Left enclosed pedestal provides three storage compartments or drawer faces for files and personal items. | |
| Knee-space access | Central 1100 mm wide bay supports a centered executive chair and allows seated entry from the front. | |
| Cable routing | An 80 mm rear grommet routes monitor and power cables from the desktop toward the underside channel. | |
| Underside cable channel | 300 x 100 mm removable tray capacity for one power strip and six cables | |
| Drawer extension | 450 mm full-extension travel with 35 kg slide load per drawer pair | |
| Privacy screening | 350 mm high rear modesty panel blocks direct under-desk sightlines without reducing knee depth. | |
| Leveling adjustment | 12 mm screw-in floor glides at four support points compensate for uneven office flooring | |
| Assembly method | Pedestal, modesty panel, end support, and top join with cam locks and steel brackets for on-site assembly. | |
| Surface maintenance | Sealed laminate or melamine surface supports dry-cloth cleaning and resists incidental office spills. | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Main top carton | 2450 x 860 x 120 mm, 42 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Private executive office | 2400 mm main span provides separate computer, document, and consultation zones for managers. | |
|---|---|---|
| Small meeting corner | The return top can support a laptop or documents during one-to-one discussions. | |
| Open-plan management pod | Modesty panel and enclosed support conceal cables and under-desk storage in visible office areas. | |
| Consulting or sales office | Warm wood top and upholstered support suit client-facing rooms requiring a residential-modern appearance. | |
| Cabled technology setup | Rear grommet and specified under-desk tray suit dual monitors, docking stations, and device power. | |
| Commercial refurbishment project | Single pedestal footprint simplifies planning when floor space and circulation width are constrained. |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Office desks safety, strength, and durability requirements for commercial worktables. | |
|---|---|---|
| EN 527-2:2002+A1:2003 | Office desk mechanical safety requirements relevant to edges, stability, and user clearance. | |
| EN 15372:2016 | Durability and strength requirements for non-domestic storage furniture used with the pedestal. | |
| EN 14073-2:2004 | Safety requirements for office storage pedestals and cabinets. | |
| EN 717-1:2004 | Formaldehyde release test method for wood-based panels used in enclosed office furniture. |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk products performance standard covering strength, durability, and stability. | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 | Storage units performance standard applicable to the integrated pedestal. | |
| ANSI/BIFMA e3-2019 | Furniture sustainability standard optional for material, air quality, and social-responsibility reporting. |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to panel substrates, dimensions, and workmanship. | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture technical requirements, applicable if steel modesty and support frames are supplied. | |
| GB 18584-2001 | Indoor decorative wood-based furniture limit for formaldehyde emission, suitable for acceptance testing. | |
| GB/T 10357.5-2011 | Furniture surface physicochemical test for coating films, applicable to cabinet and desktop finishes. | |
| GB/T 4893.4-2013 | Surface abrasion resistance test for wood furniture finishes, applicable to laminate and painted panels. |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to panel substrates, dimensions, and workmanship.; 2. GB/T 3325-2017: Metal furniture technical requirements, applicable if steel modesty and support frames are supplied.; 3. GB 18584-2001: Indoor decorative wood-based furniture limit for formaldehyde emission, suitable for acceptance testing.; 4. GB/T 10357.5-2011: Furniture surface physicochemical test for coating films, applicable to cabinet and desktop finishes.; 5. GB/T 4893.4-2013: Surface abrasion resistance test for wood furniture finishes, applicable to laminate and painted panels.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool