Name: 2-Piece Dark Bronze Faceted Plinth Nesting Coffee Table Set
Brand: JUESHANGDA
SKU: 091T1Y

Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1200 × 900 × 350 mm
Overall set footprint (staggered configuration)	1200 x 900 x 350 mm
Larger table individual dimensions	1000 x 800 x 350 mm
Smaller nesting table individual dimensions	700 x 600 x 300 mm
Table top panel thickness	50 mm
Plinth base side wall thickness	30 mm
Nesting clearance under larger table	320 mm
Table top edge chamfer width	10 mm
Floor contact surface width	30 mm
Gap between nested tables (staggered position)	20 mm
Smaller table offset distance from large table edge	200 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total set net weight	60 kg
Distributed static load capacity per table	110 kg
Floor load rating (distributed)	85 kg/m²
Recommended maximum number of place settings	4
Surface scratch resistance (pencil hardness)	2H
Structural warranty (residential use)	3 years
Available finish color options	2
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Table body structure	1.5mm cold-rolled steel sheet monolithic welded construction
Surface finish	Antique brushed bronze powder coating with hand-applied patina
Internal structural reinforcement	2mm steel internal cross bracing at plinth corners
Table top surface	Smooth matte metallic sealed top with no additional overlay
Floor protection pads	5mm thick non-marking EVA felt pads at plinth base corners
Weld joints	Ground and polished smooth invisible welded seams
Coating thickness (topcoat)	80μm
Material moisture content (metal components)	0%
Edge finishing	Deburred smooth rounded 1mm radius edges on all top perimeters
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Nesting adjustment	Smaller table slides freely along floor to tuck under larger table
Surface utilization	Flat, level top supports books, decorative objects and beverage service items
Floor compatibility	Full perimeter plinth base sits stably on low-pile carpet and hard flooring
Layout flexibility	Tables can be positioned fully separated, partially nested, or fully offset
Maintenance access	Smooth non-porous metal surface wipes clean with dry or damp soft cloth
Assembly requirement	Fully welded assembled units ship with no consumer assembly needed
Load distribution	Continuous plinth base spreads weight evenly to avoid floor indentation
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Primary residential use	Centered in front of curved or modular sectional living room sofas
Secondary residential use	Served as low accent table set in open-concept lounge or reception seating areas
Recommended room size	20 m² or larger living spaces
Style compatibility	Pairs with modern, contemporary, minimalist and luxe industrial interior schemes
Surface use guideline	Supports coffee table books, decorative trays, candle holders and small beverage service items
Designer configuration recommendation	Position smaller table offset at 45 degrees to larger table for a curated asymmetric look
Commercial space use	Suitable for boutique hotel lobbies, high-end office waiting areas and luxury lounge spaces

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 15372:2008+A1:2016	Furniture - Strength, durability and safety for domestic tables, applicable for load performance
EN 1022:2018	Furniture - Seating and tables - Determination of stability, applicable for plinth base safety

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X7.1-2022	Furniture sustainability standard, optional for low-emission coating verification

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for metal furniture, applicable to dimensional and structural tolerances
GB/T 4893.8-2013	Surface wear resistance test for furniture coatings, recommended for finish durability acceptance
GB/T 4893.9-2013	Impact resistance test for furniture surfaces, recommended for metal top performance validation

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for metal furniture, applicable to dimensional and structural tolerances;
2. GB/T 4893.8-2013: Surface wear resistance test for furniture coatings, recommended for finish durability acceptance;
3. GB/T 4893.9-2013: Impact resistance test for furniture surfaces, recommended for metal top performance validation;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CT-PLN-BRZ-NST-02

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CT-PLN-BRZ-NST-02

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CT-PLN-BRZ-NST-02Open Export Tool

Quick Actions

Post an RFQ

Product Description

The 2-Piece Dark Bronze Faceted Plinth Nesting Coffee Table Set from JUESHANGDA, model CT-PLN-BRZ-NST-02, delivers a refined geometric silhouette anchored by solid plinth construction suited to curated modern interiors. The set features two coordinated tables with a faceted plinth form, defined by clean, angular lines and a dark bronze metallic finish. When arranged in a staggered configuration, the set presents a cohesive layered profile, with the smaller table designed to tuck fully beneath the larger unit; users may also position the tables fully separated, partially nested, or fully offset to suit spatial needs, with a designer-recommended asymmetric layout placing the smaller table at a 45-degree angle to the larger piece for a polished, curated look. Each table is built with a monolithic welded frame crafted from 1.5mm cold-rolled steel sheet, reinforced with 2mm steel cross bracing at plinth corners for structural rigidity. All welded joints are ground and polished to create smooth, invisible seams, while all tabletop perimeters feature deburred 1mm radius smooth rounded edges and a 10mm chamfer for a refined finish. The structure is finished with an antique brushed bronze powder coating applied with hand-rubbed patina, topped with an 80μm topcoat, creating a smooth matte metallic sealed tabletop with no additional overlay. Plinth bases are fitted with 5mm thick non-marking EVA felt pads at corners, and a 30mm wide floor contact surface ensures stable placement across low-pile carpet and hard flooring. The sintered stone construction delivers a 2H pencil hardness scratch-resistant, non-porous surface that wipes clean easily with a dry or damp soft cloth for simple maintenance. Each table supports a distributed static load of 110kg, with the continuous plinth base spreading weight evenly to prevent floor indentation; the set is sized to accommodate up to four place settings, with flat, level tops ideal for holding coffee table books, decorative trays, candle holders, and small beverage service items. The units ship fully welded and assembled, requiring no consumer assembly. This set is ideally suited for residential placement centered in front of curved or modular sectional living room sofas, or as a low accent table set in open-concept lounge and reception seating areas, for spaces 20m² or larger. It pairs seamlessly with modern, contemporary, minimalist, and luxe industrial interior schemes. Procurement teams should note the set ships in two cartons, with an available finish option count of 2, and a 3-year structural warranty for residential use. The 320mm nesting clearance under the larger table allows smooth, free sliding of the smaller unit for flexible layout adjustments.

2-Piece Dark Bronze Faceted Plinth Nesting Coffee Table Set Specifications

Suppliers and stock