商品供应商2-Piece Dark Bronze Faceted Plinth Nesting Coffee Table Set，1.5mm cold-rolled steel sheet monolithic welded construction
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| 产品外部尺寸（宽 × 深 × 高） | 1200 × 900 × 350 mm | |
|---|---|---|
| Overall set footprint (staggered configuration) | 1200 x 900 x 350 mm | |
| Larger table individual dimensions | 1000 x 800 x 350 mm | |
| Smaller nesting table individual dimensions | 700 x 600 x 300 mm | |
| Table top panel thickness | 50 mm | |
| Plinth base side wall thickness | 30 mm | |
| Nesting clearance under larger table | 320 mm | |
| Table top edge chamfer width | 10 mm | |
| Floor contact surface width | 30 mm | |
| Gap between nested tables (staggered position) | 20 mm | |
| Smaller table offset distance from large table edge | 200 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Total set net weight | 60 kg | |
|---|---|---|
| Distributed static load capacity per table | 110 kg | |
| Floor load rating (distributed) | 85 kg/m² | |
| Recommended maximum number of place settings | 4 | |
| Surface scratch resistance (pencil hardness) | 2H | |
| Structural warranty (residential use) | 3 years | |
| Available finish color options | 2 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Table body structure | 1.5mm cold-rolled steel sheet monolithic welded construction | |
|---|---|---|
| Surface finish | Antique brushed bronze powder coating with hand-applied patina | |
| Internal structural reinforcement | 2mm steel internal cross bracing at plinth corners | |
| Table top surface | Smooth matte metallic sealed top with no additional overlay | |
| Floor protection pads | 5mm thick non-marking EVA felt pads at plinth base corners | |
| Weld joints | Ground and polished smooth invisible welded seams | |
| Coating thickness (topcoat) | 80μm | |
| Material moisture content (metal components) | 0% | |
| Edge finishing | Deburred smooth rounded 1mm radius edges on all top perimeters | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| Nesting adjustment | Smaller table slides freely along floor to tuck under larger table | |
|---|---|---|
| Surface utilization | Flat, level top supports books, decorative objects and beverage service items | |
| Floor compatibility | Full perimeter plinth base sits stably on low-pile carpet and hard flooring | |
| Layout flexibility | Tables can be positioned fully separated, partially nested, or fully offset | |
| Maintenance access | Smooth non-porous metal surface wipes clean with dry or damp soft cloth | |
| Assembly requirement | Fully welded assembled units ship with no consumer assembly needed | |
| Load distribution | Continuous plinth base spreads weight evenly to avoid floor indentation | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Primary residential use | Centered in front of curved or modular sectional living room sofas | |
|---|---|---|
| Secondary residential use | Served as low accent table set in open-concept lounge or reception seating areas | |
| Recommended room size | 20 m² or larger living spaces | |
| Style compatibility | Pairs with modern, contemporary, minimalist and luxe industrial interior schemes | |
| Surface use guideline | Supports coffee table books, decorative trays, candle holders and small beverage service items | |
| Designer configuration recommendation | Position smaller table offset at 45 degrees to larger table for a curated asymmetric look | |
| Commercial space use | Suitable for boutique hotel lobbies, high-end office waiting areas and luxury lounge spaces |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 15372:2008+A1:2016 | Furniture - Strength, durability and safety for domestic tables, applicable for load performance | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating and tables - Determination of stability, applicable for plinth base safety |
STANDARD S2
北美市场采购验货参考 * ANSI/BIFMA 标准
美国及加拿大家具标准
| ANSI/BIFMA X7.1-2022 | Furniture sustainability standard, optional for low-emission coating verification |
|---|
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable to dimensional and structural tolerances | |
|---|---|---|
| GB/T 4893.8-2013 | Surface wear resistance test for furniture coatings, recommended for finish durability acceptance | |
| GB/T 4893.9-2013 | Impact resistance test for furniture surfaces, recommended for metal top performance validation |
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. GB/T 3324-2017：General technical requirements for metal furniture, applicable to dimensional and structural tolerances； 2. GB/T 4893.8-2013：Surface wear resistance test for furniture coatings, recommended for finish durability acceptance； 3. GB/T 4893.9-2013：Impact resistance test for furniture surfaces, recommended for metal top performance validation； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具