Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	863 × 863 × 457 mm
Overall set footprint (nested)	863 x 863 x 457 mm
Large table diameter	863 mm
Large table total height	457 mm
Large table top thickness	50 mm
Small table diameter	635 mm
Small table total height	406 mm
Tabletop edge vertical striped inlay width	30 mm
Under-table floor clearance	380 mm
Nested footprint (small table tucked)	863 x 680 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total set net weight	26 kg
Large table distributed top load capacity	50 kg
Surface coating abrasion resistance	2000 cycles
Finish moisture resistance	Grade B for indoor dry use
Structural joint static load rating	100 kg
Warranty period (structural defects)	3 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop core substrate	18mm thick MDF panel
Tabletop surface layer	Natural burl wood veneer with multi-color wood inlay
Tabletop edge construction	Alternating solid black and off-white wood veneer strips
Surface finish	Low-VOC matte clear lacquer
Support legs	Solid rubberwood block legs with matte black paint
Joinery hardware	Zinc-plated steel corner brackets with M6 connector bolts
Surface protective layer	2mm thick scratch-resistant top coat
Edge inlay adhesive	Water-resistant PVA wood glue
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Two-piece nesting function	Small table slides partially under large table
Dual-height surface use	Large and small tables have 51mm height difference
Stable three-leg support	Each table uses three evenly spaced block legs
Surface care compatibility	Clean with soft damp cloth, no harsh solvents
Floor protection	Leg bases fitted with 5mm thick felt floor glides
Assembly requirement	Delivered fully assembled
Customization option	Dimensions adjustable per buyer request
Leg cross-section (per block leg)	120 x 120 mm
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential living room placement	Position in front of 3-seater or sectional sofas as primary coffee surface
Boutique lounge and waiting area use	Suits high-end retail lounges, design studios and hotel reception areas
Tiered display and serving	Use two surface heights for serving drinks, displaying decor and books
Small urban apartment fit	Nested configuration saves floor space in compact living areas
Postmodern/Mid-century modern interior matching	Pairs with curved upholstered sofas, textured rugs and neutral toned seating
Low-traffic formal reception spaces	Suitable for quiet office reception or executive lounge areas

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Residential furniture strength, durability and safety requirements for tables
EN 13722:2004	Furniture test methods for surface resistance to cold liquids
EN 71-3:2019+A1:2021	Migration of certain elements, for safety in homes with children

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for structural safety
GB 18584-2001	Limit of harmful substances in wood furniture, for indoor air quality compliance
GB/T 4893.8-2013	Furniture surface test for abrasion resistance, validates finish durability

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety;
2. GB 18584-2001: Limit of harmful substances in wood furniture, for indoor air quality compliance;
3. GB/T 4893.8-2013: Furniture surface test for abrasion resistance, validates finish durability;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · MPH-NCT-ABSW-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · MPH-NCT-ABSW-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · MPH-NCT-ABSW-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Artistic Burl Inlay Two-Piece Round Nesting Coffee Table Set from MakkaPakkaHome, model MPH-NCT-ABSW-01, brings postmodern artistic design to both residential and commercial spaces through its carefully considered form and functional build. Visually, the set features two round tabletops defined by decorative multi-color wood burl inlay across the main surface, bordered by a crisp edge of alternating solid black and off-white wood veneer strips. The two tables rest on evenly spaced matte black solid rubberwood block legs, with a subtle height difference between the two pieces that allows the smaller table to slide partially beneath the larger one for a streamlined nested layout when not in active use. Construction centers on a durable wood composite core topped with natural burl wood veneer, sealed with a low-VOC matte clear lacquer and an additional scratch-resistant top coat. Zinc-plated steel corner brackets and M6 connector bolts secure the leg joints, while water-resistant PVA wood glue bonds the edge inlays. Leg bases are fitted with felt glides to protect floor surfaces, and the set arrives fully assembled, with optional dimension adjustments available to meet buyer requests. In use, the dual-height surfaces support flexible serving and display, accommodating drinks, decorative objects, and reading materials across the two tiers. The nested configuration saves valuable floor space, making the set well suited for compact urban apartments as well as open-plan residential living rooms, where it sits neatly in front of 3-seater or sectional sofas paired with textured rugs and neutral, curved upholstery. It also fits refined commercial settings including high-end retail lounges, design studios, hotel reception areas, and low-traffic executive office spaces, aligning with both postmodern and mid-century modern interior schemes. Surfaces clean easily with a soft damp cloth, with no harsh solvents required. Procurement teams and residential buyers should note the set ships across two cartons, with a 3-year warranty covering structural defects. The finish is rated for indoor dry environments, making it unsuitable for high-moisture or outdoor use. Load ratings are calibrated for standard coffee table use, so consideration of intended weight loads is recommended before specification for high-traffic or heavy-use applications.

Artistic Burl Inlay Two-Piece Round Nesting Coffee Table Set with Striped Edge Specifications

Suppliers and stock