纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	863 × 863 × 457 mm
Overall set footprint (nested)	863 x 863 x 457 mm
Large table diameter	863 mm
Large table total height	457 mm
Large table top thickness	50 mm
Small table diameter	635 mm
Small table total height	406 mm
Tabletop edge vertical striped inlay width	30 mm
Under-table floor clearance	380 mm
Nested footprint (small table tucked)	863 x 680 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total set net weight	26 kg
Large table distributed top load capacity	50 kg
Surface coating abrasion resistance	2000 cycles
Finish moisture resistance	Grade B for indoor dry use
Structural joint static load rating	100 kg
Warranty period (structural defects)	3 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop core substrate	18mm thick MDF panel
Tabletop surface layer	Natural burl wood veneer with multi-color wood inlay
Tabletop edge construction	Alternating solid black and off-white wood veneer strips
Surface finish	Low-VOC matte clear lacquer
Support legs	Solid rubberwood block legs with matte black paint
Joinery hardware	Zinc-plated steel corner brackets with M6 connector bolts
Surface protective layer	2mm thick scratch-resistant top coat
Edge inlay adhesive	Water-resistant PVA wood glue
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Two-piece nesting function	Small table slides partially under large table
Dual-height surface use	Large and small tables have 51mm height difference
Stable three-leg support	Each table uses three evenly spaced block legs
Surface care compatibility	Clean with soft damp cloth, no harsh solvents
Floor protection	Leg bases fitted with 5mm thick felt floor glides
Assembly requirement	Delivered fully assembled
Customization option	Dimensions adjustable per buyer request
Leg cross-section (per block leg)	120 x 120 mm
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living room placement	Position in front of 3-seater or sectional sofas as primary coffee surface
Boutique lounge and waiting area use	Suits high-end retail lounges, design studios and hotel reception areas
Tiered display and serving	Use two surface heights for serving drinks, displaying decor and books
Small urban apartment fit	Nested configuration saves floor space in compact living areas
Postmodern/Mid-century modern interior matching	Pairs with curved upholstered sofas, textured rugs and neutral toned seating
Low-traffic formal reception spaces	Suitable for quiet office reception or executive lounge areas

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Residential furniture strength, durability and safety requirements for tables
EN 13722:2004	Furniture test methods for surface resistance to cold liquids
EN 71-3:2019+A1:2021	Migration of certain elements, for safety in homes with children

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for structural safety
GB 18584-2001	Limit of harmful substances in wood furniture, for indoor air quality compliance
GB/T 4893.8-2013	Furniture surface test for abrasion resistance, validates finish durability

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for structural safety；
2. GB 18584-2001：Limit of harmful substances in wood furniture, for indoor air quality compliance；
3. GB/T 4893.8-2013：Furniture surface test for abrasion resistance, validates finish durability；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MPH-NCT-ABSW-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MPH-NCT-ABSW-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MPH-NCT-ABSW-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Artistic Burl Inlay Two-Piece Round Nesting Coffee Table Set from MakkaPakkaHome, model MPH-NCT-ABSW-01, brings postmodern artistic design to both residential and commercial spaces through its carefully considered form and functional build. Visually, the set features two round tabletops defined by decorative multi-color wood burl inlay across the main surface, bordered by a crisp edge of alternating solid black and off-white wood veneer strips. The two tables rest on evenly spaced matte black solid rubberwood block legs, with a subtle height difference between the two pieces that allows the smaller table to slide partially beneath the larger one for a streamlined nested layout when not in active use. Construction centers on a durable wood composite core topped with natural burl wood veneer, sealed with a low-VOC matte clear lacquer and an additional scratch-resistant top coat. Zinc-plated steel corner brackets and M6 connector bolts secure the leg joints, while water-resistant PVA wood glue bonds the edge inlays. Leg bases are fitted with felt glides to protect floor surfaces, and the set arrives fully assembled, with optional dimension adjustments available to meet buyer requests. In use, the dual-height surfaces support flexible serving and display, accommodating drinks, decorative objects, and reading materials across the two tiers. The nested configuration saves valuable floor space, making the set well suited for compact urban apartments as well as open-plan residential living rooms, where it sits neatly in front of 3-seater or sectional sofas paired with textured rugs and neutral, curved upholstery. It also fits refined commercial settings including high-end retail lounges, design studios, hotel reception areas, and low-traffic executive office spaces, aligning with both postmodern and mid-century modern interior schemes. Surfaces clean easily with a soft damp cloth, with no harsh solvents required. Procurement teams and residential buyers should note the set ships across two cartons, with a 3-year warranty covering structural defects. The finish is rated for indoor dry environments, making it unsuitable for high-moisture or outdoor use. Load ratings are calibrated for standard coffee table use, so consideration of intended weight loads is recommended before specification for high-traffic or heavy-use applications.

Artistic Burl Inlay Two-Piece Round Nesting Coffee Table Set with Striped Edge Specifications

供应商与现货