Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	800 × 800 × 510 mm
Overall assembled dimensions	800 x 800 x 510 mm
Tabletop thickness	12 mm
Corner radius of tabletop	50 mm
Metal leg cross-section width	40 mm
Metal frame wall thickness	1.5 mm
Under-table floor clearance	420 mm
Base footprint outer span	720 x 720 mm
Center junction cross-brace height	80 mm
Edge overhang from leg to tabletop edge	40 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Distributed static tabletop load capacity	100 kg
Product net weight	22 kg
Surface abrasion resistance	2000 cycles
Frame rust resistance rating	Grade 1 for indoor use
Recommended number of users	4 people
Surface water repellency rating	No penetration for 24 hours
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop surface	White base with grey marble veining, sintered stone or high-pressure laminate
Tabletop edge banding	Matching matte white PVC/ABS edge trim
Support frame base	Matte black powder-coated carbon steel, welded one-piece geometric structure
Central cross-brace	Same powder-coated steel as legs, box-section welded joint
Floor contact feet	Injection-molded black non-slip plastic glides
Frame surface finish	80 micron matte black powder coat
Tabletop core substrate	High-density MDF or particleboard core under stone/laminate face
Fasteners	Zinc-plated steel hex bolts and cam locks for tabletop-to-frame attachment
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Assembly requirement	Knock-down assembly required, attaching top to pre-welded base with included hardware
Surface cleaning function	Non-porous sealed top supports wipe-clean with damp cloth, no sealing required
Floor protection function	Plastic glides at leg bases prevent scuffing on hard floors and carpet
Structural stability function	Interlocking geometric base distributes weight evenly, no tipping under offset loads
Adjustment function	Optional threaded glides allow 5mm height adjustment for uneven floors
Usage position function	Fixed low height aligned to standard sofa seat height for beverage/snack placement
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Primary application space	Residential living room center placement in front of sofas and sectionals
Secondary application space	Reception lounge areas, small office waiting rooms, apartment balcony lounge zones
Target user group	Urban residents, renters, modern minimalist interior design projects
Recommended pairing	Pair with 3-seat sofas, modular sectionals, or fabric/leather lounge chairs seating 4people
Surface usage suitability	Placement of beverages, books, decorative items, remote controls, and small table lamps
Flooring compatibility	Suitable for carpet, hardwood, tile, and vinyl flooring with installed floor glides

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Furniture safety for domestic use	EN 12521:2015
Surface formaldehyde emission	EN 13986:2004+A1:2015 E1 grade
Powder coating performance	EN 13438:2020

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Tabletop formaldehyde emission	GB/T 39600E0 grade
Furniture mechanical stability	GB/T 10357.1
Metal coating adhesion	GB/T 9286Grade 1
Furniture surface wear resistance	GB/T 4893.8

Standardized tender description text

This product must meet the following technical requirements:
1. Tabletop formaldehyde emission: GB/T 39600E0 grade;
2. Furniture mechanical stability: GB/T 10357.1;
3. Metal coating adhesion: GB/T 9286Grade 1;
4. Furniture surface wear resistance: GB/T 4893.8;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CT-SQ8051-WMBK

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CT-SQ8051-WMBK

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CT-SQ8051-WMBKOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Rounded Square White Faux Marble Coffee Table with Black Geometric Metal Base (model CT-SQ8051-WMBK) is a square, low-profile coffee table designed with modern minimalist aesthetics, defined by a rounded-corner square top and an open geometric base. Its white tabletop features subtle grey marble veining, finished with matching matte white edge trim, paired with a matte black metal frame that creates a clean, visually balanced silhouette suited to open-concept layouts. The table is built with a composite tabletop, constructed with a high-density core substrate topped with either sintered stone or high-pressure laminate, edged with matching matte trim. Its base is a welded one-piece geometric structure made from matte black powder-coated carbon steel, reinforced with a central box-section cross-brace for structural rigidity. Injection-molded non-slip plastic glides sit at each leg base, with optional threaded glides available to accommodate minor uneven floor surfaces. Tabletop-to-frame attachment uses zinc-plated steel hex bolts and cam locks for secure fastening. Designed for practical everyday use, the non-porous sealed tabletop supports simple wipe-clean maintenance with a damp cloth, requiring no additional sealing after installation. The interlocking geometric base distributes weight evenly to resist tipping under offset loads, while the floor glides prevent scuffing across all compatible flooring types. Its fixed low height aligns with standard sofa seat heights, ideal for holding beverages, reading materials, decorative objects, remote controls, and small table lamps. An integrated cable management tray supports organized routing of power and data cables for connected devices. This coffee table is primarily intended for residential living rooms, positioned centrally in front of 3-seat sofas, modular sectionals, or lounge seating configured for four users. It also works well in secondary settings including reception lounges, small office waiting rooms, and apartment balcony lounge zones, fitting seamlessly with modern minimalist interior design schemes for urban residents, renters, and professional design projects. For procurement planning, note that the product ships knock-down across two cartons per set, with assembly required to attach the tabletop to the pre-welded base using included hardware. It is designed exclusively for indoor use, compatible with carpet, hardwood, tile, and vinyl flooring when fitted with the included glides. Confirm the preferred tabletop finish option when ordering, and account for the specified packaged weight and volume for shipping and receiving logistics.

Rounded Square White Faux Marble Coffee Table with Black Geometric Metal Base Specifications

Suppliers and stock