Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	800 × 800 × 450 mm
Tabletop thickness	12 mm
Pedestal base floor contact diameter (large table)	500 mm
Pedestal base floor contact diameter (small table)	400 mm
Brass accent ring width	20 mm
Pedestal waist diameter (narrowest point)	120 mm
Edge profile thickness	2 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total set net weight	42 kg
Large table distributed static load capacity	50 kg
Surface scratch resistance rating	Grade 6
Surface water absorption rate	0.02%
Metal base rust resistance coating thickness	60 μm
Recommended maximum weight per tabletop point load	10 kg
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop slab	Polished sintered stone, light grey marble-veined finish
Pedestal upper cone	1.5mm thick carbon steel, matte gunmetal powder coat
Pedestal lower cone	1.5mm thick carbon steel, brushed dark gunmetal finish
Waist accent ring	Solid polished brass, PVD sealed to prevent tarnish
Tabletop mounting plate	3mm thick galvanized steel, pre-drilled for hardware
Floor contact glides	Non-marking 5mm thick TPE rubber
Connection hardware	Stainless steel M8 bolts and lock washers
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Nesting storage function	Smaller table slides fully under larger table to reduce footprint by 50% when not in use
Independent use function	Both tables can be separated and used as standalone accent surfaces at different heights
Surface maintenance feature	Non-porous sintered stone top wipes clean with dry or damp cloth, no sealing required
Floor protection function	Integrated TPE glides prevent scuffing on hardwood, tile, and vinyl flooring, no additional pads needed
Stability feature	Wide flared lower pedestal base lowers center of gravity to prevent tipping when items are placed on table edges
Assembly process	Two-part pedestal joins at brass ring, top attaches via pre-installed mounting plate with included hex key
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential living room use	Place in front of sofas or sectionals to hold drinks, remotes, books, and small decor items
Small apartment and studio use	Nesting design saves floor space when surfaces are not needed for entertaining
Lounge and reception area use	Suitable for hotel lobbies, office waiting areas, and showroom seating zones
Balcony casual seating area	Pair with low outdoor lounge chairs for light refreshment service (indoor rated only)

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Household furniture safety	EN 12521:2015
Surface emission testing	EN 16516:2017

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Tabletop mechanical performance	GB/T 35166
Metal furniture coating performance	GB/T 3324
Furniture stability testing	GB/T 10357.7

Standardized tender description text

This product must meet the following technical requirements:
1. Tabletop mechanical performance: GB/T 35166;
2. Metal furniture coating performance: GB/T 3324;
3. Furniture stability testing: GB/T 10357.7;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · NCT-HG8060-ST

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · NCT-HG8060-ST

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · NCT-HG8060-STOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The NCT-HG8060-ST 2-Piece Round Nesting Coffee Table Set delivers a sleek contemporary silhouette defined by smooth circular tabletops and sculptural hourglass pedestal supports, accented with narrow polished brass rings at the narrowest pedestal waist. The set pairs two height-differentiated tables: the larger unit stands 450mm tall with an 800mm diameter top, while the smaller unit stands 400mm tall with a 600mm diameter top. When not in active use, the smaller table slides fully beneath the larger to cut its occupied floor footprint by half, creating a streamlined visual profile; the two pieces may also be separated entirely to serve as independent accent surfaces at staggered heights across a space. Each tabletop is crafted from 12mm thick polished sintered stone in a light grey marble-veined finish, with a 2mm smooth edge profile. The hourglass pedestals are constructed from 1.5mm thick carbon steel, with a matte gunmetal powder coat on the upper cone, a brushed dark gunmetal finish on the lower flared cone, and a 20mm wide solid polished brass PVD-sealed accent ring at the narrow 120mm waist. Non-marking 5mm thick TPE rubber glides are fitted to the 500mm diameter (large table) and 400mm diameter (small table) base contact points, while tabletops attach to 3mm thick pre-drilled galvanized steel mounting plates via stainless steel M8 bolts and lock washers. The sintered stone surface carries a Grade 6 scratch resistance rating, 0.02% water absorption rate, and non-porous construction that wipes clean with a dry or damp cloth with no sealing required. The 60μm thick rust-resistant coating on metal bases supports long-term regular use, while the wide flared lower pedestal lowers the unit’s center of gravity to resist tipping when items rest on table edges. The set supports 50kg distributed static load on the large table, 10kg maximum point load per tabletop, and integrated cable management capacity for 10 power or data cables with a 10kg tray load rating. The TPE glides prevent scuffing on hardwood, tile, and vinyl flooring without additional pads. The set suits residential living rooms placed before sofas or sectionals to hold drinks, remotes, books, and small decor; small apartments and studios where space-saving nesting supports flexible entertaining layouts; hotel lobbies, office waiting areas, and showroom seating zones; and covered balcony casual seating paired with low lounge chairs for light refreshment service, though the set is rated for indoor use only. Assembly requires 40 minutes per set, with a two-part pedestal that joins at the brass ring and a top secured via the pre-installed mounting plate using the included hex key. Procurement teams should note the unbranded set ships as one unit across two cartons, with a total packaged gross weight of 90kg and 0.55m³ total packaging volume, and a total net set weight of 42kg, to plan receiving, storage, and installation logistics appropriately.

2-Piece Round Nesting Coffee Table Set with Sintered Stone Top Specifications

Suppliers and stock