The NCT-HG8060-ST 2-Piece Round Nesting Coffee Table Set delivers a sleek contemporary silhouette defined by smooth circular tabletops and sculptural hourglass pedestal supports, accented with narrow polished brass rings at the narrowest pedestal waist. The set pairs two height-differentiated tables: the larger unit stands 450mm tall with an 800mm diameter top, while the smaller unit stands 400mm tall with a 600mm diameter top. When not in active use, the smaller table slides fully beneath the larger to cut its occupied floor footprint by half, creating a streamlined visual profile; the two pieces may also be separated entirely to serve as independent accent surfaces at staggered heights across a space. Each tabletop is crafted from 12mm thick polished sintered stone in a light grey marble-veined finish, with a 2mm smooth edge profile. The hourglass pedestals are constructed from 1.5mm thick carbon steel, with a matte gunmetal powder coat on the upper cone, a brushed dark gunmetal finish on the lower flared cone, and a 20mm wide solid polished brass PVD-sealed accent ring at the narrow 120mm waist. Non-marking 5mm thick TPE rubber glides are fitted to the 500mm diameter (large table) and 400mm diameter (small table) base contact points, while tabletops attach to 3mm thick pre-drilled galvanized steel mounting plates via stainless steel M8 bolts and lock washers. The sintered stone surface carries a Grade 6 scratch resistance rating, 0.02% water absorption rate, and non-porous construction that wipes clean with a dry or damp cloth with no sealing required. The 60μm thick rust-resistant coating on metal bases supports long-term regular use, while the wide flared lower pedestal lowers the unit’s center of gravity to resist tipping when items rest on table edges. The set supports 50kg distributed static load on the large table, 10kg maximum point load per tabletop, and integrated cable management capacity for 10 power or data cables with a 10kg tray load rating. The TPE glides prevent scuffing on hardwood, tile, and vinyl flooring without additional pads. The set suits residential living rooms placed before sofas or sectionals to hold drinks, remotes, books, and small decor; small apartments and studios where space-saving nesting supports flexible entertaining layouts; hotel lobbies, office waiting areas, and showroom seating zones; and covered balcony casual seating paired with low lounge chairs for light refreshment service, though the set is rated for indoor use only. Assembly requires 40 minutes per set, with a two-part pedestal that joins at the brass ring and a top secured via the pre-installed mounting plate using the included hex key. Procurement teams should note the unbranded set ships as one unit across two cartons, with a total packaged gross weight of 90kg and 0.55m³ total packaging volume, and a total net set weight of 42kg, to plan receiving, storage, and installation logistics appropriately.