| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 1800 x 900 x 750 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Pedestal base width (per unit) | 350 mm | |
| Longitudinal support beam cross-section | 80 x 40 mm | |
| Under-table knee clearance height | 690 mm | |
| Edge overhang (long side) | 50 mm | |
| Leg/pedestal wall thickness | 2 mm | |
| Foot pad diameter | 50 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Seating capacity | 6 persons | |
|---|---|---|
| Distributed tabletop static load | 150 kg | |
| Product net weight | 110 kg | |
| Surface scratch resistance | 6H pencil hardness | |
| Leveler adjustment range | 10 mm | |
| Surface heat resistance | 180 °C | |
| Recommended warranty period | 365 days | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | Polished black veined natural marble or sintered stone, high-gloss sealed finish | |
|---|---|---|
| Pedestal bases | Gunmetal gray powder-coated carbon steel, brushed matte metallic finish | |
| Longitudinal support beam | Rectangular carbon steel tube, gunmetal powder-coated finish, welded connection to pedestals | |
| Edge trim | Matching stone finished edge, polished to match tabletop surface, chamfered 1mm radius | |
| Hardware connectors | Zinc-plated steel M8 bolts and lock washers for base-to-top and beam assembly | |
| Floor levelers | Reinforced nylon base with threaded steel stud, non-marking rubber contact pad | |
| Surface sealant | Food-safe transparent polyurethane sealant, 0.1mm dry film thickness | |
| Frame metal moisture content | Less than 0.1% surface moisture after powder coating | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Height adjustment | Fixed 750mm dining height, no electric or manual height lift mechanism | |
|---|---|---|
| Table extension | Non-extendable fixed rectangular top, no removable leaf or slide mechanism | |
| Floor leveling | Threaded adjustable foot pads at each base corner, 10mm vertical adjustment | |
| Surface cleaning | Non-porous polished surface, suitable for wiping with mild household cleaning agents | |
| Structural rigidity | Welded steel frame with bolted tabletop connection, no wobble at rated load | |
| Cable management | No built-in power outlets or wire grommets, designed exclusively for dining use | |
| Assembly requirement | Knock-down assembly, requiring cross-head wrench and included hardware to attach top to bases | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Suitable for 6-person family daily meals and casual gatherings, paired with modern upholstered dining chairs | |
|---|---|---|
| Open-plan kitchen dining area | Fits contemporary minimalist kitchen spaces with neutral tile or wood flooring | |
| Apartment small dining nook | 1800mm length fits standard urban apartment dining zones without excessive footprint | |
| Light commercial cafe seating | Durable stone surface suitable for low-traffic boutique cafe or lounge dining areas | |
| Hotel guest suite dining area | Luxury finish matches upscale hotel suite furnishing for in-room dining use | |
| Showroom display set | Coordinates with matching upholstered armchairs for modern home furnishing showroom displays |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety requirements for domestic dining tables | |
|---|---|---|
| EN 15185:2011 | Furniture table surface resistance to abrasion test method for finish validation | |
| EN 15186:2011 | Furniture table surface resistance to scratches test method for stone top validation |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural stability verification | |
|---|---|---|
| GB/T 4893.9-2013 | Furniture surface test for heat resistance, applicable to stone tabletop finish validation | |
| GB 18584-2001 | Indoor decorating materials limit of harmful substances for wooden furniture, applicable for sealant VOC checks |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural stability verification; 2. GB/T 4893.9-2013: Furniture surface test for heat resistance, applicable to stone tabletop finish validation; 3. GB 18584-2001: Indoor decorating materials limit of harmful substances for wooden furniture, applicable for sealant VOC checks; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
