| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 500 x 500 x 550 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Unit net weight | 22 kg | |
|---|---|---|
| Top surface static load capacity | 30 kg | |
| Total internal storage volume | 85 L | |
| Drawer slide open/close cycle rating | 50000 cycles | |
| Recommended maximum user weight on top | 50 kg | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Internal structural frame | 18mm thick E1 grade engineered wood | |
|---|---|---|
| Exterior upholstery | 1.2mm thick matte faux leather | |
| Decorative stitching | High-strength polyester thread | |
| Drawer hardware | Polished gold-tone zinc alloy pulls | |
| Tabletop surface | 12mm thick tempered glass panel | |
| Tabletop edge trim | Polished rose gold stainless steel binding | |
| Drawer slides | Side-mounted 3-section soft-close ball bearing slides | |
| Base trim | Matte black PVC anti-scuff binding | |
| Drawer box material | 12mm thick MDF with fabric lining | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Drawer operation | Three independently opening curved front drawers with soft-close slides | |
|---|---|---|
| Hardware alignment | Centered single pull per drawer for uniform opening force | |
| Surface protection | Tempered glass top resists scratches, water rings and heat up to 80°C | |
| Anti-tip function | Included wall anchor kit secures unit to wall to prevent forward tipping | |
| Storage organization | Equal-height drawers for sorted storage of bedside essentials | |
| Floor protection | Concealed non-marking felt pads under base | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Shipping carton dimensions | 560 x 560 x 610 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential bedroom use | Placed beside beds as bedside table for lamps, books and personal items | |
|---|---|---|
| Luxury living room use | Used as side table next to sofas or accent chairs for beverages and decor | |
| Boutique hotel guest room use | Installed in high-end hotel rooms for consistent upscale aesthetic and durable storage | |
| Walk-in closet use | Positioned in closet spaces for accessory and jewelry storage | |
| Recommended complementary furniture | Pairs with upholstered platform beds, dressers and accent seating in matching taupe tones |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and strength requirements for domestic storage furniture and kitchen worktops | |
|---|---|---|
| EN 12520:2015 | Strength, durability and safety standards for residential seating and case goods |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural stability verification | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, required for formaldehyde emission testing | |
| GB/T 16799-2008 | Standard for polyurethane synthetic leather used for furniture upholstery |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural stability verification; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, required for formaldehyde emission testing; 3. GB/T 16799-2008: Standard for polyurethane synthetic leather used for furniture upholstery; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
