| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 500 x 420 x 520 mm | |
|---|---|---|
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Net weight | 24 kg | |
|---|---|---|
| Top static load capacity | 30 kg | |
| Drawer slide cycle rating | 30,000 open-close cycles | |
| Knob pull resistance | 50 kg | |
| Unit stability load | 15 kg eccentric top load without tipping | |
| Storage volume | 37 l total interior volume | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main cabinet body | 18 mm wood-composite panels with upholstered exterior | |
|---|---|---|
| Outer padding | 15 mm foam-backed upholstery over rounded side and front edges | |
| Upholstery surface | Ivory leather-look fabric or synthetic leather with subtle grain | |
| Drawer fronts | Upholstered composite panels separated by three horizontal shadow gaps | |
| Top panel | Padded ivory upholstered surface with rounded perimeter | |
| Edge trim | Chrome-plated decorative metal strips following both rounded front corners | |
| Drawer knobs | Polished zinc-alloy round knobs with recessed base | |
| Drawer slides | Side-mounted metal ball-bearing slides | |
| Internal drawer box | Lacquered or melamine-faced composite drawer box, 12 mm panels | |
| Base protection | 4 small plastic or nylon floor glides | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Drawer operation | Two independently opening drawers with full-extension side slides for access to the complete 390 mm box depth | |
|---|---|---|
| Storage organization | Two stacked compartments separate upper personal items from lower clothing or books | |
| Pull operation | Two 28 mm round knobs provide centered single-hand access to each drawer | |
| Edge protection | Fully rounded upholstered front corners reduce impact risk in narrow bedroom pathways | |
| Floor protection | Low-profile glides allow repositioning while limiting scratches on hard flooring | |
| Top display function | Flat 500 x 420 mm surface accommodates a lamp, clock, phone, or decorative centerpiece | |
| Freestanding installation | No wall anchoring is required for normal bedside use; anti-tip fixing is recommended if used by children | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Carton dimensions | 570 x 490 x 590 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Bedroom bedside use | Place one 520 mm high cabinet on each side of a double or upholstered bed for accessible storage and display | |
|---|---|---|
| Upholstered bed ensemble | Ivory padded exterior and chrome accents coordinate with soft fabric or leather beds | |
| Hotel guest room | Suitable for hotel rooms needing quiet rounded edges, two drawers, and a durable wipe-clean exterior | |
| Apartment furnishing | Compact 500 x 420 mm footprint fits small bedrooms and rental furniture packages | |
| Senior or child-safe bedroom | Rounded upholstered corners reduce sharp-edge impact compared with square board nightstands | |
| Modern bedroom styling | Use with neutral wall colors and polished metal lighting to reinforce the contemporary look |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
