| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 500 x 400 x 600 mm | |
|---|---|---|
| tabletop raised lip height | 30 mm | |
| rear cable notch width | 80 mm | |
| drawer internal dimensions | 440 x 340 x 110 mm | |
| pedestal support column dimensions | 100 x 200 x 420 mm | |
| square base plate dimensions | 380 x 380 x 20 mm | |
| tabletop panel thickness | 25 mm | |
| drawer front panel thickness | 20 mm | |
| trim edge thickness | 8 mm | |
| floor clearance under drawer | 0 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| net weight | 12 kg | |
|---|---|---|
| static tabletop load capacity | 30 kg | |
| upholstery abrasion resistance | 50000 cycles | |
| recommended user weight for placed items | No direct standing load, intended for placed personal items only | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| upholstered drawer front and side panels | 1.2mm thick taupe PU faux leather, even stitched edge detail | |
|---|---|---|
| tabletop surface and base plate surface | Matte taupe PU upholstery over 25mm MDF core | |
| edge trim on all panels | Dark ebony wood veneer with matte sealed finish | |
| central pedestal column | Black powder-coated steel cross support with 1.5mm wall thickness | |
| drawer box internal construction | 12mm thick multi-layer plywood core | |
| drawer slides | Side-mounted 3/4 extension ball-bearing metal slides | |
| base plate bottom | Non-slip EVA felt pads for floor protection | |
| core structural frame | High-density MDF and engineered wood substrate | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| raised lipped tabletop | 30mm tall perimeter lip retains small personal items, prevents sliding off | |
|---|---|---|
| rear cable management notch | 80mm wide U-shaped cutout routes charging cords for phones and bedside devices | |
| single soft-close drawer | Push-to-open mechanism with 3/4 extension travel for stored personal items | |
| central pedestal support | Cross-shaped steel column connects tabletop assembly to square base, no leg obstruction | |
| stable floor mounting | Square weighted base plate sits flush on floor, no wobble on hard or carpeted surfaces | |
| scratch-resistant contact surface | Felt pads on base bottom prevent scuffing on hardwood, tile or vinyl flooring | |
| stain-resistant upholstery | Wipe-clean PU surface resists common spills from bedside beverages and cosmetics | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| modern living room side table use | Stable pedestal base works beside sofas and accent chairs for drinks and decor | |
|---|---|---|
| hotel guest room furnishing | Durable wipe-clean upholstery and cable management support travel device charging | |
| small apartment multi-use surface | Low-profile design fits studio apartments as both nightstand and entry catch-all | |
| home office accent table | Functions as a side table next to office seating for documents and charging devices |
EU Market Access Requirements* EN Standards
| EN 15372:2008 | Furniture - Strength, durability and safety for non-domestic storage furniture, applicable for structural testing | |
|---|---|---|
| EN 14749:2016 | Domestic and kitchen storage units - Safety requirements, applicable for drawer and edge safety |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural safety and finish quality | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing | |
| GB/T 16799-2008 | Standard for polyurethane synthetic leather, applicable for upholstery material performance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety and finish quality; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing; 3. GB/T 16799-2008: Standard for polyurethane synthetic leather, applicable for upholstery material performance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
