Product supplierOval Upholstered 2-Drawer Nightstand, 18mm thick engineered hardwood plywood
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 600 × 450 × 550 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net product weight | 28 kg | |
|---|---|---|
| Top surface static load capacity | 30 kg | |
| Drawer slide cycle rating | 50000 cycles | |
| Recommended maximum user weight for top edge seating | 80 kg | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Internal structural frame | 18mm thick engineered hardwood plywood | |
|---|---|---|
| Top outer trim and base plinth | Walnut veneered solid wood edge | |
| Top central inset panel | Textured dark cast stone composite | |
| Exterior upholstery | 1.2mm thick full-grain beige leather | |
| Drawer front backing | 12mm MDF core | |
| Drawer internal liners | Black flocked soft-touch fabric | |
| Drawer slide hardware | Cold-rolled steel soft-close undermount slides | |
| Seam construction | 2mm matching leather stitching at 8mm pitch | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Two-tier drawer storage | Two equal-height fully extending drawers for bedside item organization | |
|---|---|---|
| Soft-close drawer mechanism | Undermount slides with auto-retract in final 50mm of travel | |
| Rounded corner safety design | Fully oval curved end panels eliminate sharp protruding edges | |
| Scratch-resistant top surface | Sealed textured stone inset resists scuffs from lamps and beverage containers | |
| Anti-tip floor contact | Low-profile plinth base with integrated adjustable leveling feet | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential master bedroom placement | Positioned beside beds 2000 mm wide for nighttime storage of personal items | |
|---|---|---|
| Luxury hotel guest room application | Used in high-end hotel suites to match premium upholstered bed furnishing schemes | |
| Living room accent side table use | Placed beside upholstered sofas or lounge chairs for drinks, books and remote storage | |
| Designer walk-in closet fitting | Used as a low storage pedestal for accessories and folded personal items |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage furniture safety and structural strength requirements | |
|---|---|---|
| EN 13336:2009 | Leather for furniture upholstery performance test methods |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural stability verification | |
|---|---|---|
| GB/T 16799-2008 | Furniture leather performance specification, applicable for upholstery material acceptance | |
| GB 18584-2001 | Indoor decoration material limit of harmful substances in wood furniture, mandatory formaldehyde testing |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural stability verification; 2. GB/T 16799-2008: Furniture leather performance specification, applicable for upholstery material acceptance; 3. GB 18584-2001: Indoor decoration material limit of harmful substances in wood furniture, mandatory formaldehyde testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool