| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 600 x 430 x 560 mm | |
|---|---|---|
| Raised tray top lip height | 40 mm | |
| Single drawer front height | 210 mm | |
| Under-base floor clearance height | 120 mm | |
| Tray top interior usable width | 540 mm | |
| Tray top interior usable depth | 370 mm | |
| Drawer internal usable depth | 380 mm | |
| Drawer internal usable width | 480 mm | |
| Outer panel upholstery thickness | 20 mm | |
| Corner radius on curved front edges | 60 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 20 kg | |
|---|---|---|
| Product net weight | 25 kg | |
| Drawer slide operation cycle rating | 50000 cycles | |
| Surface abrasion resistance (Martindale) | 50000 cycles | |
| Recommended maximum user weight applied to top edge | 50 kg | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Internal structural frame | 18 mm thick E1-grade engineered wood (MDF) | |
|---|---|---|
| Exterior upholstery | 1.2 mm thick matte beige faux leather with contrast light stitching | |
| Panel padding under upholstery | 20 mm thick 30 kg/m³ density high-resilience polyurethane foam | |
| Raised tray interior finish | Walnut wood veneer with matte clear lacquer | |
| Drawer slide hardware | Cold-rolled steel full-extension side-mount ball-bearing slides | |
| Cantilever base inner support | 1.5 mm thick powder-coated steel reinforcement bracket | |
| Drawer box construction | 12 mm thick engineered wood with smooth matte interior finish | |
| Stitching specification | 8 mm stitch pitch with matching light-toned bonded thread | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Upper raised tray storage | Lipped open top to contain small items and prevent rolling off | |
|---|---|---|
| Two handleless drawer storage | Push-to-open operation for fully flush front panels without external handles | |
| Open under-base recess | 120 mm high clearance to accommodate robot vacuum access under the unit | |
| Soft rounded corner protection | Curved front/side edges eliminate sharp corners for bedroom safety | |
| Flush seamless front design | Drawer fronts align perfectly with upholstered side panels for gap-free appearance | |
| Soft-close drawer damping | Built-in hydraulic dampers prevent slamming during drawer closure | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Master bedroom bedside placement | Positioned adjacent to standard 600 mm height bed frames for easy access | |
|---|---|---|
| Hotel guest room bedside furnishing | Durable upholstered finish suited for high-turnover hospitality environments | |
| Small apartment compact storage | Narrow footprint fits tight spaces beside platform beds or in studio apartments | |
| Open-shelf modern interior schemes | Soft curved minimalist design complements contemporary, wabi-sabi, or luxury decor | |
| Robot-vacuum compatible bedroom layouts | Open under-base clearance allows standard robot vacuums to pass underneath | |
| Secondary living room side table use | Functions as an end table beside sofas for holding drinks, remotes, and reading materials |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units worktops safety requirements, applicable to nightstand use | |
|---|---|---|
| EN 13356:2010 | Upholstered furniture furniture leather performance requirements | |
| EN 12521:2015 | Domestic furniture strength durability safety for seating and storage units |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural frame performance | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture | |
| GB/T 16799-2008 | Performance requirements for polyurethane synthetic leather used for upholstery | |
| GB/T 10357.5-2011 | Furniture mechanical performance test for storage units strength and durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural frame performance; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture; 3. GB/T 16799-2008: Performance requirements for polyurethane synthetic leather used for upholstery; 4. GB/T 10357.5-2011: Furniture mechanical performance test for storage units strength and durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
