| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall cabinet size | 500 x 400 x 520 mm | |
|---|---|---|
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Net weight | 18 kg | |
|---|---|---|
| Top static load capacity | 30 kg | |
| Drawer count | 2 drawers | |
| Drawer operating cycles | 20,000 cycles | |
| Leg floor load points | 4 points | |
| Recommended users per unit | 1 sleeper | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Case body | Engineered-wood panels with an ivory matte painted surface | |
|---|---|---|
| Drawer fronts | Matte ivory painted panel fronts with flush inset alignment | |
| Top panel | Painted engineered-wood top with a formed edge frame | |
| Side panels | Smooth painted engineered-wood panels with square vertical edges | |
| Handles | Dark powder-coated metal bar pulls with straight mounting posts | |
| Legs | Dark matte metal splayed legs with tapered profile | |
| Drawer slides | Side-mounted metal ball-bearing drawer slides | |
| Internal drawer bottom | 3 mm hardboard or 5 mm engineered-wood drawer base | |
| Body panel thickness | 18 mm nominal board thickness | |
| Foot contact pads | Injection-molded polymer glide pads at each leg end | |
| Joinery hardware | Cam-lock bolts, confirmat screws, and metal corner brackets | |
| Surface finish | Low-sheen polyurethane or powder-coated paint system |
Adjustment / rotation / tilt / mobility / storage features
| Upper drawer storage | Horizontal pull-out drawer providing a 430 x 340 x 150 mm interior envelope for personal items | |
|---|---|---|
| Lower drawer storage | Horizontal pull-out drawer providing a 430 x 340 x 150 mm interior envelope for folded textiles | |
| Drawer extension | Side-mounted ball-bearing slides with 350 mm travel for full access to the drawer interior | |
| Handle operation | Two fixed horizontal bar pulls, one centered on each drawer, allowing two-finger pull operation | |
| Freestanding support | Four splayed metal legs stabilize the cabinet without wall attachment | |
| Floor cleaning access | 105 mm under-case clearance permits a robotic vacuum or broom to pass below the lower rail | |
| Leveling adjustment | Polymer foot pads with a 3 mm thread adjustment compensate for minor floor unevenness | |
| Bedside device placement | The flat top supports a lamp, phone, clock, or small charging tray within a 30 kg top load | |
| Soft-close behavior | Drawers are specified with optional self-closing action requiring slide selection before order | |
| Locking function | No lock is present on either visible drawer front | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Carton count | 1 flat-pack carton | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Bedroom bedside use | Place beside a single, double, queen, or king bed to hold a lamp, phone, book, and nighttime accessories | |
|---|---|---|
| Hotel guest room | Use as a matching pair around a double bed for compact personal storage and a clean room appearance | |
| Serviced apartment | Install in short-stay apartments where guests need concealed storage without a large dresser | |
| Youth bedroom | Use beside a student or youth bed for stationery, chargers, clothing, and personal items | |
| Small bedroom or studio | Select where floor space is limited because the 500 x 400 mm footprint is narrower than a chest of drawers | |
| Matching bedroom set | Pair with an ivory bed, dresser, or wardrobe sharing matte panels and dark metal legs | |
| Care facility bedroom | Suitable where a simple easy-to-clean top and elevated floor clearance support routine housekeeping |
EU Market Access Requirements* EN Standards
| Household furniture safety | EN 14749 addresses storage furniture safety, including stability and safe assembly | |
|---|---|---|
| Formaldehyde emission | EN 13986 provides wood-based panel performance requirements, including formaldehyde classes | |
| Surface performance | EN 12720 and EN 12721 cover resistance to cold liquids and wet-heat exposure | |
| Hardware corrosion guidance | EN 1670 applies to corrosion resistance of building hardware where metal legs or handles are coated |
Standards applicable to China-market projects
| Formaldehyde emission guidance | GB/T 39600 applies to artificial wood panels used in the painted carcass | |
|---|---|---|
| Wood furniture quality guidance | GB/T 3324 covers general wooden furniture dimensions, workmanship, and inspection | |
| Furniture hardware guidance | GB/T 3325 applies to metal furniture hardware such as handles and drawer slides |
This product must meet the following technical requirements: 1. Formaldehyde emission guidance: GB/T 39600 applies to artificial wood panels used in the painted carcass; 2. Wood furniture quality guidance: GB/T 3324 covers general wooden furniture dimensions, workmanship, and inspection; 3. Furniture hardware guidance: GB/T 3325 applies to metal furniture hardware such as handles and drawer slides; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
