Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1500 × 1500 × 1200 mm
Overall footprint (L x W x partition height)	1500 x 1500 x 1200 mm
Desktop working height	750 mm
Desktop panel thickness	25 mm
Main desktop depth (work surface)	700 mm
Knee clearance height under desk	680 mm
Knee clearance width at center	700 mm
Mobile storage unit dimensions (W x D x H)	400 x 550 x 725 mm
Lower solid partition panel height	600 mm
Upper translucent partition panel height	600 mm
Partition frame profile width	40 mm
Drawer internal usable dimensions	320 x 480 x 150 mm
Open storage shelf internal height	200 mm
Cable grommet diameter	60 mm
Carcass Panel Thickness	25 mm
Back Panel Thickness	9 mm
Door / Drawer Front Thickness	22 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Desktop uniform static load capacity	80 kg
Drawer slide open/close cycle life	50000 cycles
Total product net weight	100 kg
Formaldehyde emission limit	0.124 mg/m³
Surface abrasion resistance (melamine finish)	2000 revolutions
Shelf Distributed Load	30 kg/shelf
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Angle / Life	165°; 80000 cycles
Anti-tip Fixing Reference	Products above 1200 mm should use at least 2 wall fixing points
Recommended Procurement Warranty	Carcass 5 years; hardware 3 years; finish 2 years

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Desktop substrate and finish	E1 grade melamine-faced particleboard, 2mm PVC arc edge banding
Partition lower panel	16mm thick melamine-faced particleboard in dark grey finish
Partition upper panel	Translucent ribbed PC light-diffusing panel in off-white finish
Partition frame	Anodized aluminum alloy profile, 1.2mm wall thickness
Mobile storage unit carcass	16mm thick melamine-faced particleboard in two-tone grey/light oak finish
Storage door and drawer front	16mm thick melamine-faced board with integrated vertical pull handle
Drawer slides	3-section cold-rolled steel ball-bearing silent slides
Storage casters	50mm diameter swivel nylon casters, 2 with lock function
Cable grommets	ABS plastic round desktop cable grommets with removable cap
Drawer lock	Zinc alloy keyed cam lock for drawer security
Modesty panel (desk rear)	16mm thick melamine-faced panel matching lower partition finish
Desk support panels	25mm thick melamine-faced structural side panels connecting desktop to floor

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Cable management	Two desktop cable grommets route power and data cables from surface to under-desk area
Mobile storage mobility	Storage unit sits on four swivel casters, allowing repositioning under desk or alongside work surface
Storage configuration	Mobile unit provides 1 lockable lower drawer, 1 middle open shelf, 1 upper hinged door cabinet
Drawer operation	Three-section full-extension slides allow full drawer access for file retrieval, with silent soft-close action
Partition privacy	Two-part partition provides lower seated privacy and upper light transmission without full sight block
Modular connectivity	Partition frames accept connection to additional cubicle units for multi-station cluster layouts
Drawer security	Keyed lock secures lower drawer for confidential document storage
Caster locking	Two lockable casters fix storage unit in position during use to prevent unintended movement
Under-partition cable routing	Aluminum under-partition cable tray organizes power strips and data cables below work surface
Door swing direction	Storage cabinet door opens 110 degrees outward for full interior access, with magnetic catch to hold closed
Cable / Vent Opening Reference	If fitted, 80 mm diameter

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 700× 350 mm/carton according to carcass split
Reference Packaged Gross Weight	100 kg/set in 3 cartons
Reference Packaging Volume	0.65 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Open-plan office individual workstations	Provides visual privacy and dedicated storage for employees in open office layouts
Small business staff work areas	Compact footprint fits small offices without requiring custom built-in partitions
Call center and administrative staff zones	Cable management and work surface size supports computer and phone equipment
Temporary project team workspaces	Modular design allows reconfiguration as team size and layout needs change
Government and institutional office spaces	Meets standard procurement specifications for durable, functional office furniture
Home office dedicated work zones	Provides office-level privacy and storage for professional remote work setups
Startup open office fit-outs	Standardized sizing allows bulk ordering and quick installation for new office spaces

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 527-1:2011	Office worktables safety and strength requirements for commercial office desk use
EN 14073-2:2004	Office storage furniture safety requirements for mobile pedestal and cabinet units
EN 14074:2004	Office furniture moving parts strength and durability for drawer slides and hinges
EN 13986:2004	Wood-based panels formaldehyde emission limits for indoor furniture applications

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

North America procurement and testing reference	ANSI/BIFMA X5.5 Desk and Table Products

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to desk and storage panel construction
GB 18580-2017	Formaldehyde emission limit for wood-based panels, minimum E1 grade requirement for indoor office use
GB/T 3327-2016	Performance requirements for office desks, including worktop load and structural stability
GB/T 10357.1-2013	Furniture mechanical performance test for table strength, durability and stability
GB/T 10357.5-2011	Furniture mechanical performance test for storage unit strength and drawer durability

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to desk and storage panel construction;
2. GB 18580-2017: Formaldehyde emission limit for wood-based panels, minimum E1 grade requirement for indoor office use;
3. GB/T 3327-2016: Performance requirements for office desks, including worktop load and structural stability;
4. GB/T 10357.1-2013: Furniture mechanical performance test for table strength, durability and stability;
5. GB/T 10357.5-2011: Furniture mechanical performance test for storage unit strength and drawer durability;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · L-CUB-WS-1500-MOB

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · L-CUB-WS-1500-MOB

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · L-CUB-WS-1500-MOBOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Single-Person L-Shaped Office Cubicle Workstation with Mobile Side Storage Cabinet (model L-CUB-WS-1500-MOB, unbranded) features a streamlined L-shaped layout with equal 1500mm side lengths, paired with a two-tone partition system that balances privacy and light flow. The 1200mm tall partitions use an anodized aluminum alloy frame with 1.2mm wall thickness, combining a 600mm tall dark grey lower solid panel made of 16mm melamine-faced particleboard with an off-white translucent ribbed PC upper panel that diffuses light while blocking direct overhead sightlines for seated users. The 25mm thick desktop is built from E1 grade melamine-faced particleboard, finished with 2mm PVC arc edge banding, set at a standard 750mm working height with 680mm of under-desk knee clearance and 700mm of central knee width. The 700mm deep main work surface supports an 80kg uniform static load, and the melamine finish resists abrasion through 2000 revolutions of contact. ABS plastic round cable grommets with removable caps are positioned on the desktop to route power and data cords neatly to the under-desk area. The included mobile storage unit is constructed from 16mm melamine-faced particleboard in a two-tone grey and light oak finish, fitted with four 50mm swivel nylon casters, two of which include locking mechanisms for stable positioning. The unit slides fully under the desk or sits adjacent to the work surface as needed, and offers three storage zones: a key-locked lower drawer for confidential documents, a middle open shelf that holds up to 30kg of distributed weight, and an upper hinged-door cabinet. The lower drawer runs on 3-section cold-rolled steel ball-bearing silent slides with soft-close action, supporting a 45kg load per pair with a 50000-cycle open/close lifespan, and extends fully for easy file access. The partition frames are designed for modular connection, allowing multiple units to be linked into multi-station clusters as needed. The unit’s compact footprint suits a wide range of spaces, including open-plan office individual work zones where visual privacy and dedicated storage are priorities, small business offices that lack space for custom built-in partitions, call center and administrative areas that support computer and phone equipment, temporary project team spaces that require flexible reconfiguration, government and institutional offices that follow standard functional furniture procurement guidelines, and dedicated home office setups for professional remote work. When procuring this unit, note that assembly takes 40 minutes per set, the product has a 100kg net weight, formaldehyde emission is limited to 0.124 mg/m³, and modular connection compatibility allows for future layout expansion without replacing existing units.

Single-Person L-Shaped Office Cubicle Workstation with Mobile Side Storage Cabinet Specifications

Suppliers and stock