| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (per single sofa) | 1080 x 880 x 920 mm | |
|---|---|---|
| Seat height from floor | 420 mm | |
| Seat usable width (per position) | 680 mm | |
| Seat cushion depth | 620 mm | |
| Backrest total height from seat surface | 500 mm | |
| Armrest height from seat surface | 200 mm | |
| Armrest total width (each side) | 200 mm | |
| Base plinth height from floor | 60 mm | |
| Matching side table overall dimensions | 600 x 600 x 550 mm | |
| Seat cushion total thickness | 120 mm | |
| Backrest padding thickness | 80 mm | |
| Wood frame trim section thickness | 30 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Per unit net weight | 55 kg | |
|---|---|---|
| Static seat load capacity (single seat) | 150 kg | |
| Seat foam compression recovery rate | 90% | |
| Seating capacity per unit | 1 person | |
| Recommended service life for commercial use | 8 years | |
| Foam indentation hardness (seat) | 45 kg/m³ density, 60% ILD | |
| Recommended commercial service life | 8 years | |
| Seat foam density | 45 kg/m³ | |
| Back foam density | 35 kg/m³ | |
| Seam strength | 120 N |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Off-white smooth matte PU leather or heavy duty commercial fabric | |
|---|---|---|
| Structural frame accents | Dark reddish-brown solid hardwood or veneered engineered wood | |
| Seat cushion padding | High density polyurethane foam, 45kg/m³ density, 120mm thick | |
| Backrest padding | Medium density polyurethane foam, 35kg/m³ density, 80mm thick | |
| Armrest padding | High density polyurethane foam, 60mm thick, wrapped in matching off-white upholstery | |
| Internal load-bearing frame | Solid pine / hardwood internal frame, 30mm thick structural members | |
| Base feet/plinth | Solid dark wood block feet, full perimeter base | |
| Upholstery stitching | Reinforced polyester thread, 8 stitches per 50mm seam pitch | |
| Upholstery abrasion resistance (reference) | 50000 Martindale cycles | |
| Seat support system | 80mm wide elastic webbing, 400mm spacing, cross-laced under seat foam | |
| Wood frame finish | Two-component polyurethane clear lacquer, semi-gloss sheen, scratch-resistant top coat | |
| Upholstery underlayer | 250g/sqm non-woven fabric barrier between foam and internal frame |
Adjustment / rotation / tilt / mobility / storage features
| Seating support | Fixed non-tilting, non-reclining upright seating position | |
|---|---|---|
| Armrest support | Fixed wide padded armrests integrated with wood frame | |
| Modular arrangement | Freestanding design, can be placed symmetrically paired or in multi-unit reception layouts | |
| Floor protection | Smooth wood base contact points, no casters, designed for placement on carpet or hard flooring | |
| Upholstery maintenance | Smooth non-porous upholstery surface, wipe-clean for regular reception area maintenance | |
| Frame structural stability | Full perimeter wood plinth base, no wobble design for frequent guest use | |
| Back support ergonomics | Segmented padded backrest with built-in lumbar support zone at 200mm above seat surface | |
| Cushion Service Configuration | Recommended 2 removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Number of packages per single sofa unit | 1 | |
|---|---|---|
| Per unit carton dimensions (single sofa) | 1180 x 980 x 1020 mm | |
| Per carton gross weight (single sofa) | 65 kg | |
| Per unit cubic volume (CBM) | 1.18 | |
| Assembly time per unit | 10 minutes | |
| 20ft GP container loading quantity (single sofa units) | 22 | |
| 40ft HQ container loading quantity (single sofa units) | 56 | |
| Packaging materials | 5-layer corrugated carton, EPS corner protection, plastic film wrap, cardboard edge bracing | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Executive office reception areas | Formal symmetrical design suitable for receiving official guests outside executive offices, matching traditional Chinese interior decoration | |
|---|---|---|
| Government and institutional meeting waiting rooms | Formal non-reclining upright design supports proper seated posture for official meeting and waiting environments | |
| Hotel VIP lounge areas | Durable commercial construction supports high guest traffic, with formal aesthetic matching luxury hotel public spaces | |
| Corporate boardroom anterooms | Matching pair layout creates formal balanced seating for pre-meeting guest waiting, paired with central side table for refreshments | |
| Paired configuration with matching dark wood side table | Recommended layout as shown, placing two sofas opposite each other or symmetrically across a center table for formal meeting setups | |
| Indoor dry low-humidity environments | Wood frame and padded upholstery designed for standard indoor climate, not suitable for outdoor or high moisture areas | |
| State-owned enterprise guest reception spaces | Conservative formal design language aligns with standard procurement specifications for institutional and state enterprise reception furniture | |
| Indoor dry climate controlled environments | Wood frame and PU upholstery designed for standard 60% RH indoor climate, not suitable for outdoor, unconditioned or high moisture areas |
EU Market Access Requirements* EN Standards
| EN 16139:2013 Furniture – Strength, durability and safety for non-domestic seating | Applicable performance standard for commercial office reception seating, specifying static load and durability test methods | |
|---|---|---|
| EN 1021-1:2014 Upholstered furniture – Ignitability assessment (smouldering cigarette) | Applicable fire safety requirement for commercial public area seating |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applicable to this wood-trimmed upholstered sofa, specifies dimensional tolerance, structural strength and finish quality requirements for acceptance | |
|---|---|---|
| GB/T 39600-2021 Limit of harmful substances in upholstered furniture | Applicable for formaldehyde and VOC emission limits, mandatory for indoor commercial furniture sold in China | |
| GB/T 1952.1-2022 Upholstered furniture – Sofa | Applicable product standard specifying sofa static load, durability and safety requirements for acceptance | |
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applicable to wood frame and trim components, specifying formaldehyde emission and heavy metal limits for finish materials |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applicable to this wood-trimmed upholstered sofa, specifies dimensional tolerance, structural strength and finish quality requirements for acceptance; 2. GB/T 39600-2021 Limit of harmful substances in upholstered furniture: Applicable for formaldehyde and VOC emission limits, mandatory for indoor commercial furniture sold in China; 3. GB/T 1952.1-2022 Upholstered furniture – Sofa: Applicable product standard specifying sofa static load, durability and safety requirements for acceptance; 4. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Applicable to wood frame and trim components, specifying formaldehyde emission and heavy metal limits for finish materials; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
