White Upholstered Reception Armchair Set with Dark Wood Frame and Side Table (model RC-SOLO-2W-ST01) is listed under Lobby Reception Sofa. Dimensions: 2600 × 850 × 900 mm. Materials: White fabric or leather-look upholstery over padded cushion, with subtle embossed surface pattern. Load capacity: 160 kg. Product Features: Formal,style,high-back,single-seat,chairs,two-chair,layout,wood-trimmed,upholstered,construction,matching,side,table. This page consolidates 6 groups of specifications and ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | KESHANG | Model | RC-SOLO-2W-ST01 |
| Overall dimensions (W × D × H) | 2600 × 850 × 900 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Single chair net weight | 42 kg |
| Single chair rated static seat load | 160 kg | Tabletop rated static load | 30 kg |
| Seating capacity | 2 users | Seat foam density | 45 kg/m3 |
| Back foam density | 35 kg/m3 | Foam rebound performance | 40% |
| Recommended daily occupancy duration | 8 hours | Service-life target | 8 years |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | Seat upholstery | White fabric or leather-look upholstery over padded cushion, with subtle embossed surface pattern |
| Back upholstery | White padded back cover in the same visible upholstery family, with horizontal seam division and embossed detailing | Arm cap | Dark-red smooth wood or wood-veneer panel with a clear coated surface, mounted over a white upholstered arm body |
| Structural frame | Dark-red finished wood or engineered-wood rails forming the rectangular side, front, and lower perimeter frames | Side panel infill | White upholstered or coated panel enclosed within the dark-red wood frame |
| Seat cushion core | Polyurethane foam core with fabric or leather-look cover and 160 mm target thickness | Back cushion core | Layered polyurethane padding with 160 mm target total thickness and horizontal lumbar pad |
| Table top | Dark-red wood or wood-veneer square tabletop with a smooth sealed finish | Table frame | Four dark-red wood legs connected by shaped aprons and decorative curved stretchers |
| Foot blocks | Dark-red rectangular wood or board support blocks, two per chair, elevating the low base | Fasteners and joining hardware | Concealed wood screws, dowels, brackets, or mortise-style connectors targeted for frame assembly |
| Protective floor glides | Polymer or felt glide pads recommended on each foot block to protect hard floors | Seating function | Each chair provides one independent upright seat with high lumbar and shoulder support for formal guest reception. |
| Back support | The high segmented backrest combines a 620 mm tall cushion and lower lumbar pad for upright sitting. | Arm support | The broad 220 mm arm caps provide a flat resting surface and visually frame the upholstered seat. |
| Tea service function | The centered 550 mm square table supports one teapot, two cups, documents, or small reception items. | Arrangement pattern | Two facing-position chairs separated by one table create a compact two-person guest conversation layout. |
| Low-base stability | The continuous wood-trimmed base and two foot blocks per chair provide a non-swiveling, stationary seating structure. | Cushion retention | The seat cushion is enclosed by a raised wood-trimmed front frame to limit forward and lateral movement. |
| Table access | The open four-leg apron allows leg and cleaning access from either side without drawers or doors. | Maintenance access | Removable or lift-out seat and back cushions should be specified for fabric cleaning and foam replacement. |
| Floor protection | Glide pads should allow repositioning on wood, tile, or carpet while preventing exposed wood contact with flooring. | Chair base block height | 60 mm |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Carton Dimensions | 850× 420× 720 mm |
| Reference Packaged Gross Weight | 23 kg/set | Reference Carton Volume | 0.26 m³/set |
| Indicative 20GP Loading | 135 sets at 85% space utilization | Indicative 40HQ Loading | 320 sets at 85% space utilization |
| Executive reception room | The two-chair table layout supports short meetings, courtesy visits, and senior-management guest reception. | Office waiting area | The high-back formal design provides upright, presentable seating for visitors waiting near reception desks. |
| VIP lounge | The white upholstery and dark-red wood trim suit government, institutional, or corporate hospitality lounges. | Meeting annex | The compact 2.6 m displayed footprint fits beside a larger conference room for breakout conversations. |
| Tea service setting | The square side table accommodates a teapot, two cups, and small documents during hosted visits. | Quiet consultation space | The separated single seats provide individual personal space for two-person advisory or HR discussions. |
| Recommended indoor climate | Use in dry, conditioned interiors at 40 to 65 percent relative humidity to protect wood finish and upholstery. | Recommended floor surface | Suitable for wood, tile, marble, or low-pile carpet when fitted with non-marking floor glides. |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2600 × 850 × 900 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Single chair net weight | 42 kg | |
|---|---|---|
| Single chair rated static seat load | 160 kg | |
| Tabletop rated static load | 30 kg | |
| Seating capacity | 2 users | |
| Seat foam density | 45 kg/m3 | |
| Back foam density | 35 kg/m3 | |
| Foam rebound performance | 40% | |
| Recommended daily occupancy duration | 8 hours | |
| Service-life target | 8 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | White fabric or leather-look upholstery over padded cushion, with subtle embossed surface pattern | |
|---|---|---|
| Back upholstery | White padded back cover in the same visible upholstery family, with horizontal seam division and embossed detailing | |
| Arm cap | Dark-red smooth wood or wood-veneer panel with a clear coated surface, mounted over a white upholstered arm body | |
| Structural frame | Dark-red finished wood or engineered-wood rails forming the rectangular side, front, and lower perimeter frames | |
| Side panel infill | White upholstered or coated panel enclosed within the dark-red wood frame | |
| Seat cushion core | Polyurethane foam core with fabric or leather-look cover and 160 mm target thickness | |
| Back cushion core | Layered polyurethane padding with 160 mm target total thickness and horizontal lumbar pad | |
| Table top | Dark-red wood or wood-veneer square tabletop with a smooth sealed finish | |
| Table frame | Four dark-red wood legs connected by shaped aprons and decorative curved stretchers | |
| Foot blocks | Dark-red rectangular wood or board support blocks, two per chair, elevating the low base | |
| Fasteners and joining hardware | Concealed wood screws, dowels, brackets, or mortise-style connectors targeted for frame assembly | |
| Protective floor glides | Polymer or felt glide pads recommended on each foot block to protect hard floors |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating function | Each chair provides one independent upright seat with high lumbar and shoulder support for formal guest reception. | |
|---|---|---|
| Back support | The high segmented backrest combines a 620 mm tall cushion and lower lumbar pad for upright sitting. | |
| Arm support | The broad 220 mm arm caps provide a flat resting surface and visually frame the upholstered seat. | |
| Tea service function | The centered 550 mm square table supports one teapot, two cups, documents, or small reception items. | |
| Arrangement pattern | Two facing-position chairs separated by one table create a compact two-person guest conversation layout. | |
| Low-base stability | The continuous wood-trimmed base and two foot blocks per chair provide a non-swiveling, stationary seating structure. | |
| Cushion retention | The seat cushion is enclosed by a raised wood-trimmed front frame to limit forward and lateral movement. | |
| Table access | The open four-leg apron allows leg and cleaning access from either side without drawers or doors. | |
| Maintenance access | Removable or lift-out seat and back cushions should be specified for fabric cleaning and foam replacement. | |
| Floor protection | Glide pads should allow repositioning on wood, tile, or carpet while preventing exposed wood contact with flooring. | |
| Chair base block height | 60 mm | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive reception room | The two-chair table layout supports short meetings, courtesy visits, and senior-management guest reception. | |
|---|---|---|
| Office waiting area | The high-back formal design provides upright, presentable seating for visitors waiting near reception desks. | |
| VIP lounge | The white upholstery and dark-red wood trim suit government, institutional, or corporate hospitality lounges. | |
| Meeting annex | The compact 2.6 m displayed footprint fits beside a larger conference room for breakout conversations. | |
| Tea service setting | The square side table accommodates a teapot, two cups, and small documents during hosted visits. | |
| Quiet consultation space | The separated single seats provide individual personal space for two-person advisory or HR discussions. | |
| Recommended indoor climate | Use in dry, conditioned interiors at 40 to 65 percent relative humidity to protect wood finish and upholstery. | |
| Recommended floor surface | Suitable for wood, tile, marble, or low-pile carpet when fitted with non-marking floor glides. |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp