| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions per single armchair | 900 x 850 x 900 mm | |
|---|---|---|
| Seat height from floor to cushion top | 420 mm | |
| Seat depth from front edge to back cushion | 580 mm | |
| Seat width between inner armrests | 560 mm | |
| Backrest height from seat surface to top edge | 480 mm | |
| Armrest height from floor to padded top surface | 600 mm | |
| Armrest width (padded surface) | 120 mm | |
| Clearance under seat frame from floor to base rail | 120 mm | |
| Front leg cross-section dimension | 45 x 45 mm | |
| Wall clearance required for placement | 80 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Per-armchair net weight | 45 kg | |
|---|---|---|
| Static seat load capacity per chair | 150 kg | |
| Armrest vertical static load per side | 40 kg | |
| Recommended maximum user weight | 120 kg | |
| Cushion compression set resistance (1000hrs use) | 15% | |
| Recommended continuous seating duration per use | 4 hours | |
| Product service life under daily commercial use | 8 years | |
| Cushion compression set resistance (1000 hours use) | 15% | |
| Seam tensile strength | 180 N | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Structural frame | Kiln-dried solid hardwood with reddish-brown polished clear lacquer finish | |
|---|---|---|
| Seat cushion core | 38kg/m³ high-density polyurethane foam with 10mm soft foam top layer | |
| Back cushion core | 30kg/m³ medium-density polyurethane foam | |
| Upholstery fabric | Light beige vertical ribbed woven polyester-blend fabric, 350g/m² weight, ≥20000 rubs Martindale abrasion resistance | |
| Armrest padding | 25kg/m³ polyurethane foam wrapped over solid wood arm core | |
| Seat support system | 8mm thick sinuous steel springs with 50mm spacing, topped with 20mm thick hard felt layer | |
| Frame joinery | Mortise and tenon joints reinforced with wood screws and wood glue at all rail connections | |
| Base stretchers | Matching solid hardwood shaped stretchers with traditional curved profile, polished to match frame finish | |
| Foot pads | 5mm thick non-slip nylon felt pads installed at the bottom of each leg to protect floor surfaces | |
| Upholstery seam construction | Stitched seams with 8mm stitch pitch, reinforced with polyester binding tape at high-tension corners | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
Adjustment / rotation / tilt / mobility / storage features
| Fixed-position seating design | No recline, swivel or height adjustment, with upright back angle fixed at 105 degrees for formal reception seating | |
|---|---|---|
| Wide padded arm support | Fully upholstered armrests extend from front leg to back frame to support full forearm weight during seated use | |
| Traditional structural reinforcement | Curved perimeter stretchers connect all four legs to increase frame rigidity and reduce wobble during long-term use | |
| Removable seat cushion | Seat cushion is fitted with hook-and-loop fasteners to allow removal for fabric cleaning and maintenance | |
| Floor protection design | Felt foot pads eliminate hard contact between wood legs and hard floor surfaces, reducing noise and scratch risk when moving chairs for cleaning | |
| Set configuration compatibility | Armchair dimensions and finish are matched to the coordinating solid wood side table for formal reception area 2-chair + 1-table layouts | |
| Color matching option | Standard upholstery color is light beige, with custom fabric color options available for bulk procurement orders to match interior design schemes | |
| Bulk order color customization | Standard upholstery color is light beige, with custom fabric color options available for orders of 10 units or more to match interior design schemes | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Knock-down packing configuration | 2 armchairs per full set, packed as 2 fully assembled chair units with protective wrapping; matching side table packed separately | |
|---|---|---|
| Per-chair individual carton dimensions | 950 x 900 x 950 mm | |
| Per-chair packed gross weight | 52 kg | |
| Per-chair packaging volume | 0.81 CBM | |
| On-site assembly time per chair | 10 minutes | |
| 40ft HQ container loading quantity (loose loaded) | 82 units | |
| Recommended inner packaging materials | 5mm thick EPE foam wrapping, 30mm thick corner foam protectors, 5-ply corrugated outer carton | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm |
Recommended spaces / users / usage modes
| Government and corporate formal reception rooms | Neutral light beige upholstery and traditional reddish wood frame match formal reception area aesthetics for guest waiting and meeting use | |
|---|---|---|
| VIP lounge areas in hotels and conference centers | Padded cushions and wide armrests provide comfortable short-stay seating for guests waiting for events or check-in | |
| Executive office rest and meeting zones | Compact single-seat dimensions allow flexible placement in private office areas for informal guest meetings or short breaks | |
| Senior care facility common areas | Sturdy solid wood frame and 420mm seat height support easy standing and sitting for older users, with no sharp exposed edges on frame components | |
| Traditional style tea rooms and cultural spaces | Wood frame design with traditional stretchers complements East Asian interior design for tea reception and cultural event use | |
| Recommended complementary furniture configuration | Two armchairs paired with one coordinating 650x650x550mm solid wood side table placed centrally between seats for tea service and guest items | |
| Corporate and government formal reception rooms | Neutral light beige upholstery and traditional reddish wood finish match formal reception aesthetics for guest waiting and official meeting use, with 2-chair + 1-table layout supporting standard tea service | |
| Hotel and conference center VIP lounges | 120mm thick seat cushions and wide padded armrests provide comfortable 4-hour short-stay seating for guests waiting for events or check-in, with durable fabric supporting 20000 rub abrasion for medium-traffic use |
EU Market Access Requirements* EN Standards
| Upholstered furniture safety recommendation | EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating, applicable to static load and fatigue testing for commercial reception use | |
|---|---|---|
| Wood furniture finish recommendation | EN 12720:2009+A1:2013 Furniture - Assessment of surface resistance to cold liquids, applicable to testing lacquer finish stain resistance for lounge areas | |
| Contract seating safety recommendation | EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating, applicable to static load and fatigue testing for commercial reception use | |
| Wood finish durability recommendation | EN 12720:2009+A1:2013 Furniture - Assessment of surface resistance to cold liquids, applicable to testing lacquer finish stain resistance for lounge areas | |
| Backrest static load capacity | 75 kg |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| Structural safety recommendation | GB/T 3324General technical requirements for wooden furniture, applicable to frame strength, dimensional stability and finish quality inspection | |
|---|---|---|
| Upholstery safety recommendation | GB/T 27962Upholstered furniture lounge seating, applicable to seat loading, cushion durability and structural safety testing | |
| Formaldehyde emission recommendation | GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable to formaldehyde and heavy metal content limits for all wood components | |
| Fabric safety recommendation | GB 18401National general safety technical code for textile products, Class B requirement for upholstery fabric direct skin contact | |
| Upholstery seating recommendation | GB/T 27962Upholstered furniture lounge seating, applicable to seat loading, cushion durability and structural safety testing | |
| Harmful substance limit recommendation | GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable to formaldehyde and heavy metal content limits for all wood components |
This product must meet the following technical requirements: 1. Structural safety recommendation: GB/T 3324General technical requirements for wooden furniture, applicable to frame strength, dimensional stability and finish quality inspection; 2. Upholstery safety recommendation: GB/T 27962Upholstered furniture lounge seating, applicable to seat loading, cushion durability and structural safety testing; 3. Formaldehyde emission recommendation: GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable to formaldehyde and heavy metal content limits for all wood components; 4. Fabric safety recommendation: GB 18401National general safety technical code for textile products, Class B requirement for upholstery fabric direct skin contact; 5. Upholstery seating recommendation: GB/T 27962Upholstered furniture lounge seating, applicable to seat loading, cushion durability and structural safety testing; 6. Harmful substance limit recommendation: GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable to formaldehyde and heavy metal content limits for all wood components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
