| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Single armchair overall dimensions | 900 x 850 x 920 mm | |
|---|---|---|
| Matching side table overall dimensions | 700 x 500 x 550 mm | |
| Seat height from floor | 450 mm | |
| Seat depth | 620 mm | |
| Seat width per chair | 680 mm | |
| Backrest height above seat | 470 mm | |
| Armrest width | 180 mm | |
| Armrest height from floor | 620 mm | |
| Decorative panel inset on armrest | 300 x 120 mm | |
| Tabletop thickness | 40 mm | |
| Table leg section size | 60 x 60 mm | |
| Knee clearance under table | 510 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Single chair net weight | 65 kg | |
|---|---|---|
| Seat static load capacity | 150 kg | |
| Seat foam density | 45 kg/m³ | |
| Back foam density | 35 kg/m³ | |
| Seat foam thickness | 120 mm | |
| Fabric abrasion resistance | 50000 Martindale cycles | |
| Recommended single chair occupancy | 1 person | |
| Back foam thickness | 150 mm | |
| Fabric seam strength | 180 N | |
| Frame joint cyclic durability | 60000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Upholstery fabric | Off-white vertical striped woven fabric | |
|---|---|---|
| Seat cushion core | High-density polyurethane foam | |
| Backrest core | Medium-high density polyurethane foam | |
| Armrest frame and trim | Dark red stained solid beech wood | |
| Armrest decorative inset | Cream off-white matte engineered wood panel with vertical fluting | |
| Internal structural frame | Kiln-dried solid wood and 18mm thick multi-layer engineered plywood | |
| Side table tabletop | Dark red stained solid wood veneer over particleboard core | |
| Side table legs and apron | Solid dark red stained hardwood with carved decorative cross-brace | |
| Seat base support | Sinuous steel spring support system with webbing layer | |
| Floor protection glides | High-density nylon non-marring glides fitted to base of all chair and table legs | |
| Table apron | 18mm thick engineered wood with dark red wood veneer, connected to legs with mortise and tenon joints | |
| Upholstery stitching | Polyester core-spun thread with 8mm seam pitch, double-stitched at all stress points |
Adjustment / rotation / tilt / mobility / storage features
| Seating function | Fixed-position formal single-seat reception seating with no recline, swivel or height adjustment | |
|---|---|---|
| Armrest function | Wide flat solid wood armrest tops integrated into chair frame, providing stable arm support and matching visual design with side table | |
| Side table function | Placed between two armchairs to hold teaware, name cards, documents and decorative display items at armrest height | |
| Stability design | Four fully grounded contact points per chair and per table with no moving parts, eliminating wobble during formal use | |
| Upholstery performance | Taut upholstery stitching with 8mm seam pitch, maintaining smooth wrinkle-free appearance over long term use | |
| Design coordination | Matching wood finish and decorative panel detailing across all armrests and table frame, creating a cohesive symmetrical reception layout | |
| Floor protection | Non-marring nylon glides on all leg bases, preventing scuff damage to low-pile commercial carpet and polished hard flooring | |
| Cushion performance | High-resilience foam core providing 40% rebound rate, recovering to original shape within 10 seconds after occupant stands | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| VIP government reception rooms | Formal symmetrical layout with traditional Chinese aesthetic for receiving official guests, matching landscape screen and carpeted interiors shown in product context | |
|---|---|---|
| Corporate executive meeting lounges | Sturdy, formal seating for pre-meeting guest waiting or small closed-door discussions, providing a professional authoritative atmosphere | |
| Hotel executive lounge areas | Durable commercial grade construction for high-traffic guest reception with consistent formal appearance | |
| Conference venue guest rest areas | Comfortable upright seating for event attendees and honored guests during breaks, with integrated side table for beverage service | |
| Recommended layout | Two armchairs positioned opposite each other or facing a central main sofa, with the side table centered between units to maintain symmetrical formal arrangement | |
| Hotel executive club lounge areas | Durable commercial grade construction for high-traffic VIP guest reception with consistent formal appearance | |
| Conference venue honored guest rest areas | Comfortable upright seating for event attendees and distinguished guests during breaks, with integrated side table for tea and beverage service | |
| Institutional leadership offices | Formal visitor seating placed opposite executive desks for scheduled one-on-one meetings, matching traditional wood office furniture finishes |
EU Market Access Requirements* EN Standards
| EN 1022:2018 | Domestic furniture - Seating - Determination of stability, applicable for verifying tip resistance of fixed reception armchairs | |
|---|---|---|
| EN 12520:2015 | Furniture - Strength, durability and safety - Requirements for domestic seating, applicable for cyclic load testing of seat, back and armrests | |
| EN 15372:2016 | Furniture - Durability, strength and safety - Requirements for non-domestic tables, applicable for verifying tabletop and leg structural performance of the side table |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional tolerance, material quality and structural strength verification of wood frame and table components | |
|---|---|---|
| GB/T 3327-2016 | Furniture - Sofas, applicable for seating dimensional requirements, cushion durability, structural stability and upholstery quality verification | |
| GB 18584-2001 | Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde and heavy metal emission testing of wood components | |
| GB 20286-2006 | Requirements for flame retardant performance of public place furniture and components, applicable for fabric and foam fire resistance verification for high-traffic official reception spaces |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional tolerance, material quality and structural strength verification of wood frame and table components; 2. GB/T 3327-2016: Furniture - Sofas, applicable for seating dimensional requirements, cushion durability, structural stability and upholstery quality verification; 3. GB 18584-2001: Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde and heavy metal emission testing of wood components; 4. GB 20286-2006: Requirements for flame retardant performance of public place furniture and components, applicable for fabric and foam fire resistance verification for high-traffic official reception spaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
